m11 3rd channel help
 

my friend got an e-maxx and didnt have a 3 channel radio... so i popped in my reciever and i cannt figure out the 3rd channel... ive read the manual over and over... how do i get my radio to have the tranny servo swap from one position to the other... im working on buying an e-maxx as well and giving him the radio from it so i can run my m11...

can anyone help...

Go into the Key assign area on the first page. It will have listed...
Trim Func step
Trim 1 trm s 5
trim 2 trm t 5
trim 3 3ch (this area is where you need to make changes)

Go to the trm3 step area it will have a number. One you have highlighted it use the incline and decline keys to change that number. For the emaxx 2 speed you will want it at 200 this will make it so when you hit the trm 3 switch the servo will flip to the opposite side or where it previously was making it shift gears.
I hope this helps.

oh man... thank you so much... i did it and it worked... thank you so much...

I know this is "OLD" but
 

I am trying to make the RD channel on my M11 work the reverse in my T-MAXX. I followed these directions but the servo will not move. I tried a second receiver just to be sure and still nothing and I am using a Spektrum module and receiver.

Anyone have an idea what I'm doing wrong?

Trim as 3rd channel
 

Guys how can i set my 3rd servo as trim on my sw5 button