mossman2

iTrader: (5)

I just picked up an i206B charger and looking for advice on the settings for charging the LiFe transmitter batteries. The battery is a 6.6 V do I set the voltage to 6.6 or Or 3.3? Any other settings I should be concerned with besides amperage?

I bought the charger used so I don't want to ruin a new battery first time out.

disaster999

iTrader: (1)

the ending voltage for LiFePO4 battery is around 3.6-3.65v per cell.

If you have a way to adjust the max voltage cutoff on the i206 charger I set it to 3.6V

vandalzzz

Just set "Life" mode, connect balance lead and go. Only make sure that end voltage for life in settings is set to something reasonable (afair its 3.6v/cell by default).