R/C Tech Forums - Hp Server power supply help

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Hp Server power supply help (https://www.rctech.net/forum/radio-electronics/1115126-hp-server-power-supply-help.html)

Hp Server power supply help

I'm getting a 460w HP server power supply ebay listing picture says model: DPS-460MB A and RMN is HSTNS-PD28 anyone know what pins i need to bridge? most things im finding are for the 750w and up versions

Quote:

Originally Posted by Ecthelion (Post 16023748)

Looks like a common slot server power supply that works for HP proliant servers. I have converted quite a few supplies for those servers. The pins should be the same. The pins are 33 and 36, but looking at it they will be pin 1 and 4. I use a 330 ohm resistor. This essentially tricks the power supply into thinking it is plugged into a server.

+1

No harm will be caused by placing the jumper on various pin outs until you find the right pins, but I would start with pins 1 and 4 as well

All of these HP power supplies are designed for HP(E) Common Slot, which means they all have the same pin outs.