Sanwa Aux1/2 Chan Setup help
#1
Tech Master
Thread Starter
iTrader: (123)
Join Date: Sep 2007
Location: Tacos Under Cacti, Searing Our Neighborhood
Posts: 1,330
Trader Rating: 123 (100%+)
Sanwa Aux1/2 Chan Setup help
I need "a Sanwa expert please!
I have a MT-S that im using for a lot of my vehicles, to include a crawler, an Infraction, and others that I need the Aux1 button to activate as a switch ..
in the case of the Crawler (dig servo) its natural state is "neutral position" (all wheels rotate) but I need to be able to activate it to the "on position" by holding that aux1 button, and then it returning to nuetral/off when released.
anyone walk me through that in steps please? I tried the university of google, but what i found was designed for another radio, and it was broken English at best.
Thanks in advance, I hope
I have a MT-S that im using for a lot of my vehicles, to include a crawler, an Infraction, and others that I need the Aux1 button to activate as a switch ..
in the case of the Crawler (dig servo) its natural state is "neutral position" (all wheels rotate) but I need to be able to activate it to the "on position" by holding that aux1 button, and then it returning to nuetral/off when released.
anyone walk me through that in steps please? I tried the university of google, but what i found was designed for another radio, and it was broken English at best.
Thanks in advance, I hope
#2
Maybe this is the video you already watched, but this provides a pretty good example but the the MT4S. Instead of setting a -100 on the low point, set 0 (neutral position for dig) for the low point and 100 for the high point.
https://www.facebook.com/watch/?v=1456299941124968
https://www.facebook.com/watch/?v=1456299941124968