R/C Tech Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   Battery Analyzing with Graphs (https://www.rctech.net/forum/radio-electronics/1090985-battery-analyzing-graphs.html)

Cromulent 10-19-2021 09:15 PM
Originally Posted by gigaplex (Post 15835291)
You risk pulling the voltage too low if you just connect lightbulbs to a pack.
You risk pulling the voltage too low if you just connect a resistor to a pack. Bulbs are just cheap readily available resistors.

gigaplex 10-19-2021 09:49 PM
Originally Posted by Cromulent (Post 15835367)
You risk pulling the voltage too low if you just connect a resistor to a pack. Bulbs are just cheap readily available resistors.
You shouldn't be doing that either. You should only ever connect an actual active discharging circuit to a LiPo with LVC.


All times are GMT -7. It is currently 09:59 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.