Orion Program Card - Which cable is which?
 

I ordered "Team Orion Vortex Dsb-R Plus Program Box - Ori65153" to program my Orion Vortex R10 Pro ESC. Now, I did not receive that sensor wire to RX cable adaptor. However I did receive a RX to some sort of white connector. How can I program the ESC now? I see this sensor wire to RX adaptor used in every video. If so, why was not this included and what is this white connector for then?
Have emailed and FB messaged but nothing yet.
Thanks

Anyone, please? Even Orion support is 0

As I recall, the adapter needed to connect the esc to the program box was included with the esc. If you still have the esc box, check to see if it is in there.

Post a picture of the adapter you have?

Thank you mushroomed Here is the pic. I have added pointer next to the cable. ESC I bought was used and nothing else came with it.I am surprised as to what came with the program box. Any way I can program the ESC with this program card and cables?

https://cimg5.ibsrv.net/gimg/www.rct...5bc38eb0fc.jpg

Unfortunately then I think you'll need to buy the ORI65151 buy the adapter to allow you to use the program box- this is the part included with the ESC that wasn't included when you bought it second hand. I ran into the same issue with mine. Many of the reviews of this program box complain of the cost and the lack of this connector which is justified in my opinion. Doesn't seem like it would have been so difficult to just include a sensor port on the program box, then the necessary cable would always be at hand.

As best I can tell, the purpose of the wire you've got the arrow on in the picture is only for programming the Orion RTR ESCs.

Yes, it should have been included. Now I must search for the cable...

There are a couple on ebay but shipping from Germany may be prohibitive.