Motor shims
 

I recently took my motor apart didnt bother to look at how the shims go back think I can just pull a expolded diagram online wrong cant find one.

It's a fantom 17.5 vsr 3

Nick Adams has lots of great videos on stock tuning:

Not to heist your thread but does anyone have a good address (preferably ebay or Europe) for an affordable supplier (bulk 50, 100, something to that extend) for Motor shims. Thankssss

You just have to look at 1/8" washers for screws. For the onroad clutch by accident I came to 5x10mm washers in 0.2mm and 0.25mm thickness with 100pcs in a bag for a low price.

Trinity sells a bulk shim kit here:
https://www.teamtrinity.com/Low-Drag...100_p_377.html

Hi Roelof, looking for 0.05 or 0.1, any ideas for those? much oblliged.

Hi Bill, shipping is crazy expensive from Trinity or even US in general to Europe. And Trinity availability in Europe is nearly non existent anymore.
Appreciate if you have any further suggestions.

Both big thanks,

At the company where I found mine:

https://www.conrad.com/p/washers-32-...-106698-106698

https://www.conrad.com/p/washers-32-...-106679-106679

https://www.conrad.com/p/washers-32-...-800281-800281

team powers shim set 0,1 to 0,5
Mini-Z Racing Italia - Shop

If youre reallly want to rebiuld. Go to Fantom Racing and order brass or teflon shims!! They have a few in stock.

just stay away from the 6 amp myth

I believe that every brand/release of motor is different, and I agree that 6A is not the standard for all motors, but folks should contact the manufacturer for a respective brand to find out what the optimal current draw is for their motor. For example Trinity recommends 5.6A for the MonsterMax and 6.5A for the Punisher, I have not asked what they recommend for the XFactor. I know some team drivers in my area are recommending 3.2A for their Tekin motors.