Go Back  R/C Tech Forums > General Forums > Racing Forum
Quebec onroad Nationals 4th edition >

Quebec onroad Nationals 4th edition

Quebec onroad Nationals 4th edition

Reply

Old 01-17-2018, 10:01 PM
  #1  
Tech Adept
Thread Starter
 
Join Date: Jan 2013
Posts: 132
Default Quebec onroad Nationals 4th edition

Following the huge success last year with more than 170 entries, making it the 2nd biggest race in Canada East Coast... Circuit Téléguidé St-Hyacinthe comes back with its 4th edition of the Quebec onroad Nationals...

Be ready for great RC fun, high grip black carpet and poutine!

Quebec Onroad Nationals - 4th Edition

April 27, 28, and 29, 2018

Classes

Sedan 21.5T Stock
o Any 1/10 scale, 190mm, 4wd touring car
o Any ROAR approved 21.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 1,350grs
o Minimum height 5mm
o Tires: Jaco Blue byo - Available at the track
o 2S 7.4v ROAR approved Maximum 8.44v

Sedan 17.5T SuperStock
o Any 1/10 scale, 190mm, 4wd touring car
o Any ROAR approved 17.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 1,350grs
o Minimum height 5mm
o Tires: Jaco Blue byo - Available at the track
o 2S 7.4v ROAR approved Maximum 8.44v

Sedan Mod
o Any 1/10 scale, 190mm, 4wd touring car
o Any brushless motor (540 size can)
o Any ESC – ROAR approved
o Weight Minimum 1,350grs
o Minimum height 5mm
o Tires: Jaco Blue byo - Available at the track
o 2S 7.4v ROAR approved Maximum 8.44v

Pancar 17.5T Stock
o Any ROAR approved 17.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 730grs
o Minimum height 3mm
o Spec tires BSR or CRC only - available at the track
o 1S 3.7v ROAR approved Maximum 4.22v

Pancar Mod
o Any brushless motor (540 size can)
o Any ESC blinky mode ROAR approved
o Weight Minimum 730grs
o Minimum height 3mm
o tires: open
o 1S 3.7v ROAR approved Maximum 4.22v

USGT
o Any 1/10 scale, 190mm, 4wd or FWD touring car
o Any ROAR approved 21.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 1,380grs (4WD)
o Weight Minimum 1,200grs (FWD)
o Tire = GRC124 (Pre-mounted), GRC125 (tires only), Ride 24025
o Minimum height 5mm
o 2S 7.4v ROAR approved Maximum 8.44v

F1
o Any 190mm, 2wd rear wheel drive Formula 1 Chassis. 270mm wheelbase max
o Any ROAR approved 25.5T brushless motor
o Any ESC blinky mode ROAR approved
o Weight Minimum 1,050grs
o Any commercially available F1-specific rubber tire may be used, any tire inserts can be used
o Minimum height 3mm
o 2S 7.4v ROAR approved Maximum 8.44v

Tamiya Truck (Fun class)
o Box stock class - Built as per manual
o Ball Bearing only approved hop-ups
o Tires permitted are the part numbers included with Tamiya kits #58632 and #58642
o Hard case LiPo batteries that fit the chassis, as designed, without modifying the battery or chassis.
o Maximum Capacity of LiPo batteries shall be no greater than 6000mAh
o Maximum LiPo battery voltage when tested is 8.44v
o Any 6 cell Sub-C NiMh battery that fits the chassis, as designed, without modifying the battery or chassis.
o The only motor permitted is RS-540 Torque-Tuned Motor
o Stock Gear ratio only
o The only ESC permitted is the TBLE-02S included in kit
o ESC battery connector may be changed to fit the battery used in the chassis.
o Motor bullet connectors must remain as they came in the kit.

Tamiya Mini
o Legal chassis platforms: M03, M05, M05 V2, M06 and M07
o Silver can motor
o Any ESC ROAR approved
o Weight Minimum 1,300grs
o Tamiya internal gears only. Aftermarket idler and spur gears are not legal
o Tamiya Mini tires (55mm and 60mm)
o Bodies available for use with M03, M05, M06 and M07 are legal and may be used on any chassis platform. (No sedan bodies allowed)
o 2S 7.4v ROAR approved Maximum 8.44v

NOTE: Min 10 entries to run a class

Entry Fee and registration: https://www.rcsignup.com/events/disp...nt.cfm?ID=6193

- 1st Class= $40, 2nd Class =$20 and 3rd Class = $15
- VIP member 1st Class= $20, 2nd Class = $10 and 3rd = $5
- Entry Deadline April 25th, 2018
- Entry Fees thru PayPal: [email protected]

Track
Race will be held at Circuit Téléguidé St-Hyacinthe Facility
15075 Ave Guy St-Hyacinthe, QC
Permitted traction compound = SXT 3.0
Pit tables, chairs, & power sources will be provided
LiPo battery sacks for charging are recommended
http://

SPONSORS:
Circuit Téléguidé St-Hyacinthe

450-278-0215
rzein is offline  
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service