***WANTED*** 1/10th scale onroad nitro cars
#1
Tech Adept
Thread Starter
***WANTED*** 1/10th scale onroad nitro cars
Looking for a serpent impact, mugen advance. anything along the lines of onroad 10th scale nitro cars. tell me what you got pictures are a plus.
#2
Guest
my nitro tc is an HPI Nitro RS4 2.
i has only a few hop ups/extras:
MIP stinger rear exhaust pipe (great low end)
2spd transmission
mounted ellegi foam tires all around
spare tires, on chrome rims, with molded inserts, 2 pairs, only 1 pair is glued, never used.
1 silver painted BMW M-coupe. I have taken the care to apply the right decals in the right spots. this is true because I got the m-coupe body when my dad owned the real m-coupe!
1 unpainted BMW 328ci coupe body. no wing.
radio - comes with 1 standard servo, or maybe two, i need to figure it out (some servos may be on my heli) the rx and tx are part of futaba 2PC radio system. you get 2 transmitters, 1 good antenna.
plenty of spare parts, like arms, shock parts, hex hubs, bulkheads, hingepins, etc.
i will provide an engine but it has lost compression, so you can just give it a rebuild. if you don't do this, then i suggest you get a nice 1+hp pullstart engine with $5 engine mounts.
if you are interested post here. i don't really know how much to ask but I need about 200 in general for my heli and other stuff.
my email is [email protected]
i has only a few hop ups/extras:
MIP stinger rear exhaust pipe (great low end)
2spd transmission
mounted ellegi foam tires all around
spare tires, on chrome rims, with molded inserts, 2 pairs, only 1 pair is glued, never used.
1 silver painted BMW M-coupe. I have taken the care to apply the right decals in the right spots. this is true because I got the m-coupe body when my dad owned the real m-coupe!
1 unpainted BMW 328ci coupe body. no wing.
radio - comes with 1 standard servo, or maybe two, i need to figure it out (some servos may be on my heli) the rx and tx are part of futaba 2PC radio system. you get 2 transmitters, 1 good antenna.
plenty of spare parts, like arms, shock parts, hex hubs, bulkheads, hingepins, etc.
i will provide an engine but it has lost compression, so you can just give it a rebuild. if you don't do this, then i suggest you get a nice 1+hp pullstart engine with $5 engine mounts.
if you are interested post here. i don't really know how much to ask but I need about 200 in general for my heli and other stuff.
my email is [email protected]
#3
Tech Regular
iTrader: (7)
Hello Ron
Ron,
I have a really nice Serpent Impulse for you. This car is the 2000 spec car with the 2 spd. It needs nothing and is in excellent condition. It has the following:
Mugen MT12 Turbo (Great compression)
Centax Clutch
2 Spd
3 sets of springs
Hitec 605 MG throttle servo
aluminum Cross brace
aluminum wheel hubs.
Rear Exhuast Side brace/ belt tensioner
Porshe 911 (yellow, great shape) body
Original box and paperwork
You will need a steering servo, Pipe, battery, reciever, to get it running.
I am offer the car up for sale at 375.00 or B.o.
Email me @ [email protected] if you are interested.
Shawn
I have a really nice Serpent Impulse for you. This car is the 2000 spec car with the 2 spd. It needs nothing and is in excellent condition. It has the following:
Mugen MT12 Turbo (Great compression)
Centax Clutch
2 Spd
3 sets of springs
Hitec 605 MG throttle servo
aluminum Cross brace
aluminum wheel hubs.
Rear Exhuast Side brace/ belt tensioner
Porshe 911 (yellow, great shape) body
Original box and paperwork
You will need a steering servo, Pipe, battery, reciever, to get it running.
I am offer the car up for sale at 375.00 or B.o.
Email me @ [email protected] if you are interested.
Shawn
#4
Tech Elite
iTrader: (13)
Serpent Impact M2 spec 2000
I have an Impact M2 spec 2000, 4WD, 2-speed.
It is quite expensive, but is ready to race, if this is what you are looking for
email me @
[email protected]
It is quite expensive, but is ready to race, if this is what you are looking for
email me @
[email protected]
#5
Tech Adept
Thread Starter
yes it is how much?
#7
Tech Adept
Thread Starter
do you have pictures? i would like to see what all comes with it and what it looks like.
#8
Tech Elite
iTrader: (13)
Ron
It has a Mega SX .15 engine, Mega-Art tuned pipe, Centex clutch, 2-speed tranny, 4WD, very high-end servos installed.
I have a deal (just started) pending on my 2 Impact M2's. One car will be completely ready to race. The second car is ready for electronics. I have a third car that is in pieces(needs to be put together), with a spare Mega SX .15.
Basically here is the deal.
1 x ready to race Impact M2 spec 2000, Futaba FM Magnum Junior.
1 x Impact M2 spec 2000 ready for electronics.
1 x Impact (parts car)
1 x Mega SX .15 w/Mega-Art pipe
1 x Serpent Starter box
40 new & used (most are new) Ellegi Impact foam tires. (these cost $600.00)
2 x bodies
I offered to sell all the above for $1,500.00
He offered $1,100.00 plus a RS4 Super ready to race.
I am looking to sell the Serpent stuff as a package
It has a Mega SX .15 engine, Mega-Art tuned pipe, Centex clutch, 2-speed tranny, 4WD, very high-end servos installed.
I have a deal (just started) pending on my 2 Impact M2's. One car will be completely ready to race. The second car is ready for electronics. I have a third car that is in pieces(needs to be put together), with a spare Mega SX .15.
Basically here is the deal.
1 x ready to race Impact M2 spec 2000, Futaba FM Magnum Junior.
1 x Impact M2 spec 2000 ready for electronics.
1 x Impact (parts car)
1 x Mega SX .15 w/Mega-Art pipe
1 x Serpent Starter box
40 new & used (most are new) Ellegi Impact foam tires. (these cost $600.00)
2 x bodies
I offered to sell all the above for $1,500.00
He offered $1,100.00 plus a RS4 Super ready to race.
I am looking to sell the Serpent stuff as a package
#10
Tech Apprentice
Hey Ron did you have any luck finding a car?
I have an XRAY NT1 09 with motor and radio but no servos or Batt.
I have an XRAY NT1 09 with motor and radio but no servos or Batt.