Anything for BL Conversion
#1
Anything for BL Conversion
There are still a few things that I am looking for, for my RC8 conversion.
-4s Lipos
-Neu 1512 2.5d/f (Or the medussa equivalent) or even a link to someone that has the Neu
-Bec
-Let me know what you have
-4s Lipos
-Neu 1512 2.5d/f (Or the medussa equivalent) or even a link to someone that has the Neu
-Bec
-Let me know what you have
Last edited by trdsupra88; 09-15-2008 at 10:07 AM.
#2
Tech Champion
iTrader: (168)
If you haven't read the 1/8th scale conversion thread you should do that first. Lots of guys run the Neu 1512 motors in different winds ranging from 1.5D to 3D.
If you happen to decide on a 1512 2/D/F, can't find one in stock, and don't want to wait a month or two to have one built, I have a brand new one for sale. Never soldered to or used at all. I want $245 shipped (plus fees if using a CC). Here's links to pics:
http://s92437987.onlinehome.us/ebaypics/Misc/neu-1.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-2.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-3.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-4.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-5.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-6.jpg
If you happen to decide on a 1512 2/D/F, can't find one in stock, and don't want to wait a month or two to have one built, I have a brand new one for sale. Never soldered to or used at all. I want $245 shipped (plus fees if using a CC). Here's links to pics:
http://s92437987.onlinehome.us/ebaypics/Misc/neu-1.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-2.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-3.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-4.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-5.jpg
http://s92437987.onlinehome.us/ebaypics/Misc/neu-6.jpg
#3
8
Is that for a truggy or buggy? I have read through most of the conversion threads but there is so much to take in and im a lil slow, I like the Tekno rc kit that uses the CB, thats about all I have figured out. I will probably get a charger and a few batteries and a motor then figure out what to put it into from there. I am definetely interested in that motor though.
#5
Tech Champion
iTrader: (168)
Is that for a truggy or buggy? I have read through most of the conversion threads but there is so much to take in and im a lil slow, I like the Tekno rc kit that uses the CB, thats about all I have figured out. I will probably get a charger and a few batteries and a motor then figure out what to put it into from there. I am definetely interested in that motor though.
It is kind of a long thread.
#6
Tech Regular
iTrader: (8)
I have the Motor/Batteries for you. 5 minutes on each. I have a Neu 1515 3D - which is 1360 KV and I have two Enerland/Polyquest 3S 6000's. People usually try to aim for 30,000 RPM and this will put you there. You just hook the two 3S batteries up in series to make 6S - The higher voltage/lower amps setups are efficient, fast and low temperature setups. You will probably get 30 minutes of runtime on this setup, and it will be perfect for your MBX5-T, or you could get my 8ight-T. - Link: FS: 5 minutes on each: Neu 1515 3D, Enerland 3S 6000 x2, Losi 8ight-T
#7
For a buggy I am really only interested in an 8 or an rc8 because the hobby shop here carries parts for those two buggies. Thanks alot though.
Thanks for all of your help, I appreciate it.
YGPM on all that good stuff.
I have the Motor/Batteries for you. 5 minutes on each. I have a Neu 1515 3D - which is 1360 KV and I have two Enerland/Polyquest 3S 6000's. People usually try to aim for 30,000 RPM and this will put you there. You just hook the two 3S batteries up in series to make 6S - The higher voltage/lower amps setups are efficient, fast and low temperature setups. You will probably get 30 minutes of runtime on this setup, and it will be perfect for your MBX5-T, or you could get my 8ight-T. - Link: FS: 5 minutes on each: Neu 1515 3D, Enerland 3S 6000 x2, Losi 8ight-T
#9
YGPM
I have a RC8 conversion.