Muchmore power supply and Turnigy Reaktor Charger
#1
SOLD!!! Muchmore power supply and Turnigy Reaktor Charger
SOLD!!!!!
For sale:
Good condition Turnigy Reaktor 300 watt 20 amp charger. This is an icharger 206B clone = Same specs with different cosmetics.
Specs for charger:
Features:
• Microprocessor controlled
• Delta-peak sensitivity (NiMH/NiCd)
• Individual cell balancing charge & discharge
• Li-ion, Li-poly and LiFe capable
• Ni-Cd and NiMH capable
• High-power and high-performance circuit
• Store function, allows safe storage current
• Data storage (Store up to 10 packs in memory)
• Cyclic charging/discharging
Specs:
Input voltage: 11~28V DC
Charge current: 0.1~20A
Discharge current: 0.1~20A
Maximum charge capacity: 300W
Maximum discharge capacity: 20W
Maximum regenerative discharge power capacity: 300W
Current drain for balancing Li-po: 350mAh/cell
Lithium (Li-poly/LiIo/LiFe) battery cell count: 1~6 series
NiCd/NiMH battery cell count: 1~17 series
Pb battery voltage: 2~24V
Battery setup memories: 10
Intelligent temperature control: Yes
Weight: 350g
Dimensions: 140x95x27mm
Will charge 1s to 3s batteries at up to 20 amps. Will do a 6s battery at up to ~12 amps with Muchmore power supply included. Utilizes balance leads on 1s packs for quicker charges and more accurate end voltage. Has battery IR measurement mode. Has power supply mode with adjustable voltage and current limits.
Good condition Muchmore Power Master World Edition 2. Has carbon vinyl wrap over top of case. Case in good condition underneath. Specs:
Length: 135mm
Width: 145mm
Height: 50mm
Constant current: 24A
Peak current: 30A / 0.5sec
Input: 100~250V (Auto selected)
Output voltage: 12.0V~16.0V - Adjustable via potentiometer on side of unit.
Small form factor and light weight. Perfect size for the Reaktor charger. Two pairs of banana plugs for outputs to charger, pit lights, tire truer etc.
Also including Reedy 1s/2s balance charge lead #997 with 4mm battery connection. As seen here: https://www.teamassociated.com/parts/details/997/
Selling because I have upgraded to an iCharger 406DUO and much larger power supply.
Interested in selling this as a package at this time. Not interested in splitting it up. Not interested in any trades. Paypal only. Shipping in USA only
$100.00 Open to reasonable offers.
For sale:
Good condition Turnigy Reaktor 300 watt 20 amp charger. This is an icharger 206B clone = Same specs with different cosmetics.
Specs for charger:
Features:
• Microprocessor controlled
• Delta-peak sensitivity (NiMH/NiCd)
• Individual cell balancing charge & discharge
• Li-ion, Li-poly and LiFe capable
• Ni-Cd and NiMH capable
• High-power and high-performance circuit
• Store function, allows safe storage current
• Data storage (Store up to 10 packs in memory)
• Cyclic charging/discharging
Specs:
Input voltage: 11~28V DC
Charge current: 0.1~20A
Discharge current: 0.1~20A
Maximum charge capacity: 300W
Maximum discharge capacity: 20W
Maximum regenerative discharge power capacity: 300W
Current drain for balancing Li-po: 350mAh/cell
Lithium (Li-poly/LiIo/LiFe) battery cell count: 1~6 series
NiCd/NiMH battery cell count: 1~17 series
Pb battery voltage: 2~24V
Battery setup memories: 10
Intelligent temperature control: Yes
Weight: 350g
Dimensions: 140x95x27mm
Will charge 1s to 3s batteries at up to 20 amps. Will do a 6s battery at up to ~12 amps with Muchmore power supply included. Utilizes balance leads on 1s packs for quicker charges and more accurate end voltage. Has battery IR measurement mode. Has power supply mode with adjustable voltage and current limits.
Good condition Muchmore Power Master World Edition 2. Has carbon vinyl wrap over top of case. Case in good condition underneath. Specs:
Length: 135mm
Width: 145mm
Height: 50mm
Constant current: 24A
Peak current: 30A / 0.5sec
Input: 100~250V (Auto selected)
Output voltage: 12.0V~16.0V - Adjustable via potentiometer on side of unit.
Small form factor and light weight. Perfect size for the Reaktor charger. Two pairs of banana plugs for outputs to charger, pit lights, tire truer etc.
Also including Reedy 1s/2s balance charge lead #997 with 4mm battery connection. As seen here: https://www.teamassociated.com/parts/details/997/
Selling because I have upgraded to an iCharger 406DUO and much larger power supply.
Interested in selling this as a package at this time. Not interested in splitting it up. Not interested in any trades. Paypal only. Shipping in USA only
$100.00 Open to reasonable offers.
Last edited by biz77; 01-18-2017 at 05:16 PM.
#2
Pm sent!