Clod Axle SuperClass Crawler Dual Brushless Systems Dual Dig 4WS!!
#1
Clod Axle SuperClass Crawler Dual Brushless Systems Dual Dig 4WS!! Partout
Considering selling or parting my clod to fund a 2.2 build. I've owned this truck for a very long time. It is currently setup for both front and rear digs, as well as over/underdrive mixing. It also is setup to run 4ws with full mixing, front, rear, and crab. I have loved this truck for a very long time, and will hate to see it go. Lots of hard to find Clod parts, as well as Narrow axial Rocksters. it is used but overall very very good shape.
Axles: $150 ea or $250 for both shipped
Integy gear housings
Hot Racing tubes and Knuckles
TTR CVD's
Ball bearings throughout
Metal gears with spools(Don't remember manufacturer)
Matzilla Bumper/ servo mounts
custom steering links
thunder Tech 12mm outdrives with 12 to 17mm Adapters
forget who made the link mounts. (both front and rear)
Chassis $20
Hot Racing SCX10 fully adjustable
shocks $40
7" billet Savage shocks (have about 8 ish with multiple springs and parts bag)(not pictured)
Shocks Green Integy $40
Pro line F550 body painted pretty SOLD
Wheels/Tires SOLD
Axial Narrow Rocksters 40 series
RC4wd Mudslingers
RC4wd foams
Electronics $125 ea $200 both systems
Front and rear Novak Crawler 2s systems
LONGwheelbase
SHORTwheelbase
As a 2.2 Truck
Axles: $150 ea or $250 for both shipped
Integy gear housings
Hot Racing tubes and Knuckles
TTR CVD's
Ball bearings throughout
Metal gears with spools(Don't remember manufacturer)
Matzilla Bumper/ servo mounts
custom steering links
thunder Tech 12mm outdrives with 12 to 17mm Adapters
forget who made the link mounts. (both front and rear)
Chassis $20
Hot Racing SCX10 fully adjustable
shocks $40
7" billet Savage shocks (have about 8 ish with multiple springs and parts bag)(not pictured)
Shocks Green Integy $40
Pro line F550 body painted pretty SOLD
Wheels/Tires SOLD
Axial Narrow Rocksters 40 series
RC4wd Mudslingers
RC4wd foams
Electronics $125 ea $200 both systems
Front and rear Novak Crawler 2s systems
LONGwheelbase
SHORTwheelbase
As a 2.2 Truck
Last edited by Lanky; 03-14-2017 at 05:51 AM.
#2
up
#3
Consider Parting...
$150 Per Axle complete
$150 WHeels N tires
$150 per Crawler ESC
$50 for the Chassis Links Body
$35 for servo's and BEC
$40 for Bumpers/ servo mounts
$50 for 8 billet 7" shocks, Various Spring rates/ valving ETC
$20 for RC guy Engine mounts
$10 for 12mm >17mm Wheel Hex's
$30 for SPC 2s 8200Mah battery
$150 Per Axle complete
$150 WHeels N tires
$150 per Crawler ESC
$50 for the Chassis Links Body
$35 for servo's and BEC
$40 for Bumpers/ servo mounts
$50 for 8 billet 7" shocks, Various Spring rates/ valving ETC
$20 for RC guy Engine mounts
$10 for 12mm >17mm Wheel Hex's
$30 for SPC 2s 8200Mah battery
#4
what radio system?
#5
I run a futaba 4px and a 4pls on it... the radio I would includ with sale is a Lansau 2.4ghz that it off of a redcat crawler I believe...
If part that out for $30 with reciever
If part that out for $30 with reciever
#6
Bump!
#7
bump
#8
how I would love to own this.
just a little out of my budget
just a little out of my budget
#9
#10
Still available!!!
#11
I could use some TTR cvds... Maybe the set of savage shocks too.
#12
Really didn't want to break it down that far
#13
Bump to the top before Ebay!
#14
Tech Rookie
Like this to bad you wouldn't wanna trade for a bully version 1
#15
I'd consider some trades, however not a bully.... I'm looking for an SCX10.2 for my Son. I also could use a set of wraith width curries, and a Built wraith/AX10 Trans