Serpent Eryx TC + loads of spares.... beyond DIALED
#1
Serpent Eryx TC + loads of spares.... beyond DIALED
SOLD!
Up for sale is my Serpent Eryx 3.0 TC roller. The car just finished 3rd in Mod at the HUDY Champs last weekend. No, I did NOT get lapped by Paul Lemieux this time. I'm coming for you Paul. It also also been in numerous national A-mains for both stock and mod over the past two years (carpet racing).
The car will also include the box, manual, tons of spare parts, and (most importantly) some stickers.
Regarding the car itself.....
There are NO electronics included.
"Aftermarket parts" include a custom hard CF chassis plate, titanium screws, a front 2.5mil gear diff, XRAY rear axles and XRAY rear gear diff, machined pistons, ti-nitride shock shafts, and extra-hard suspension arms. Other goodies include DJC front driveshafts, XRAY 2.5 springs, and aluminum camberlinks.
Now for the SPARE PARTS..... unless you routinely bend bulkheads somehow, you'll be covered.
Parts NOT in the package include the following......
AVID aluminum chassis
Stock CF chassis
Custom "soft" CF chassis
2 gear diffs
1 spool assembly
1.2 rear, 1.2 front, and 1.4 front swaybars
A pile of extra suspension arms and caster blocks
Spare DJC and straight axles
Bag of bearings
Extra shock pistons, orings, shafts, etc.
Chassis stiffener brace
1,1.5,2, and 3 solid arm mounts
1/1 and 1.5/.5 split arm mounts
Older version motormount
92t spur (for stock classes)
Springs!
A pair of Yokomo blue, purple, and pink
2 pair Serpent black
2 pair RSD white, 2 pair RSD light blue, 1 pair RSD blue
Now for the parts that are NEW IN PACKAGE. Quantity, description, item #
8x Steering knuckle (2) 401363
6x 4* Caster blocks (2) 401455
1x Xhard front arms (2) 401623
1x Hard front arms (2) 401452
1x Xhard rear arms (2) 401624
2x Driveshaft blades (16) 401409
2x Front belt 401351
1x Rear belt 401353
1x Rear hingepins (2) 401403
1x Front Hingepins (2) 401386
2x Rear uprights (2) 401454
1x Split block 0/2 401585
1x Solid block 2.5 401419
1x Nylon spool 401533
1x Ballcup pack 411206
1x Swaybar collars (2) 401358
1x DJC axle inserts (2) 401614
1x Spring clip DJC pack 401615
1x 4x6 setscrews 110119
The car has been good to me, but it's time to move on. I'm leaving the setup on it that I ran last weekend. It makes a good starting point for whatever you plan to do with the car. I'll also be happy to help with any issues you may have with the car or with setup.
I have used Jaco TC tires laying around, so if you want a couple sets I'll throw some in. I have a white-bomb LTCR practice body that I can include as well if you want. Basically, add your electronics and begin your path to becoming a champion.
For the dialed roller, box and manual, loads of spare parts, tires and body (if you want them), and most importantly sticker sheets, SOLD. I am not interested in your aluminum T-Maxx.
The used RC market is unpredictable and I'm a bad judge of value, but this car is fast and there's plenty of parts so don't lowball me or I'll passive-aggressively harass you on the forums.
Thank you for looking!
Up for sale is my Serpent Eryx 3.0 TC roller. The car just finished 3rd in Mod at the HUDY Champs last weekend. No, I did NOT get lapped by Paul Lemieux this time. I'm coming for you Paul. It also also been in numerous national A-mains for both stock and mod over the past two years (carpet racing).
The car will also include the box, manual, tons of spare parts, and (most importantly) some stickers.
Regarding the car itself.....
There are NO electronics included.
"Aftermarket parts" include a custom hard CF chassis plate, titanium screws, a front 2.5mil gear diff, XRAY rear axles and XRAY rear gear diff, machined pistons, ti-nitride shock shafts, and extra-hard suspension arms. Other goodies include DJC front driveshafts, XRAY 2.5 springs, and aluminum camberlinks.
Now for the SPARE PARTS..... unless you routinely bend bulkheads somehow, you'll be covered.
Parts NOT in the package include the following......
AVID aluminum chassis
Stock CF chassis
Custom "soft" CF chassis
2 gear diffs
1 spool assembly
1.2 rear, 1.2 front, and 1.4 front swaybars
A pile of extra suspension arms and caster blocks
Spare DJC and straight axles
Bag of bearings
Extra shock pistons, orings, shafts, etc.
Chassis stiffener brace
1,1.5,2, and 3 solid arm mounts
1/1 and 1.5/.5 split arm mounts
Older version motormount
92t spur (for stock classes)
Springs!
A pair of Yokomo blue, purple, and pink
2 pair Serpent black
2 pair RSD white, 2 pair RSD light blue, 1 pair RSD blue
Now for the parts that are NEW IN PACKAGE. Quantity, description, item #
8x Steering knuckle (2) 401363
6x 4* Caster blocks (2) 401455
1x Xhard front arms (2) 401623
1x Hard front arms (2) 401452
1x Xhard rear arms (2) 401624
2x Driveshaft blades (16) 401409
2x Front belt 401351
1x Rear belt 401353
1x Rear hingepins (2) 401403
1x Front Hingepins (2) 401386
2x Rear uprights (2) 401454
1x Split block 0/2 401585
1x Solid block 2.5 401419
1x Nylon spool 401533
1x Ballcup pack 411206
1x Swaybar collars (2) 401358
1x DJC axle inserts (2) 401614
1x Spring clip DJC pack 401615
1x 4x6 setscrews 110119
The car has been good to me, but it's time to move on. I'm leaving the setup on it that I ran last weekend. It makes a good starting point for whatever you plan to do with the car. I'll also be happy to help with any issues you may have with the car or with setup.
I have used Jaco TC tires laying around, so if you want a couple sets I'll throw some in. I have a white-bomb LTCR practice body that I can include as well if you want. Basically, add your electronics and begin your path to becoming a champion.
For the dialed roller, box and manual, loads of spare parts, tires and body (if you want them), and most importantly sticker sheets, SOLD. I am not interested in your aluminum T-Maxx.
The used RC market is unpredictable and I'm a bad judge of value, but this car is fast and there's plenty of parts so don't lowball me or I'll passive-aggressively harass you on the forums.
Thank you for looking!
Last edited by cwoods34; 01-28-2016 at 01:35 PM.
#3
It's Friday night. I have nothing better to do. Hmmm? Looking at my sale thread? You like what you see dontcha?
Go ahead, make me an offer. You wanna go fast. This car is fast. Problem solved.
My wife said as soon as I sell this toy, I can buy more toys. Help me out.
Go ahead, make me an offer. You wanna go fast. This car is fast. Problem solved.
My wife said as soon as I sell this toy, I can buy more toys. Help me out.
#8
How about trades, I have a pretty fast mini cooper with a civic body
LOL Just kidding, Cody's stuff is legit, fast, clean, and usually (but not always) finishes in front of me
LOL Just kidding, Cody's stuff is legit, fast, clean, and usually (but not always) finishes in front of me
#10
I will consider selling the roller or the spare parts separately. I don't want to sell specific pieces out of the parts lot, however.
So if you are interested in one or the other, feel free to make me an offer. If you are looking at the roller, I can put either spur gear on it and am still willing to include some Jaco tires and an LTCR practice body if wanted.
So if you are interested in one or the other, feel free to make me an offer. If you are looking at the roller, I can put either spur gear on it and am still willing to include some Jaco tires and an LTCR practice body if wanted.
#11
Interested. I sent you a private message.
Up for sale is my Serpent Eryx 3.0 TC roller. The car just finished 3rd in Mod at the HUDY Champs last weekend. No, I did NOT get lapped by Paul Lemieux this time. I'm coming for you Paul. It also also been in numerous national A-mains for both stock and mod over the past two years (carpet racing).
The car will also include the box, manual, tons of spare parts, and (most importantly) some stickers.
Regarding the car itself.....
There are NO electronics included.
"Aftermarket parts" include a custom hard CF chassis plate, titanium screws, a front 2.5mil gear diff, XRAY rear axles and XRAY rear gear diff, machined pistons, ti-nitride shock shafts, and extra-hard suspension arms. Other goodies include DJC front driveshafts, XRAY 2.5 springs, and aluminum camberlinks.
Now for the SPARE PARTS..... unless you routinely bend bulkheads somehow, you'll be covered.
Parts NOT in the package include the following......
AVID aluminum chassis
Stock CF chassis
Custom "soft" CF chassis
2 gear diffs
1 spool assembly
1.2 rear, 1.2 front, and 1.4 front swaybars
A pile of extra suspension arms and caster blocks
Spare DJC and straight axles
Bag of bearings
Extra shock pistons, orings, shafts, etc.
Chassis stiffener brace
1,1.5,2, and 3 solid arm mounts
1/1 and 1.5/.5 split arm mounts
Older version motormount
92t spur (for stock classes)
Springs!
A pair of Yokomo blue, purple, and pink
2 pair Serpent black
2 pair RSD white, 2 pair RSD light blue, 1 pair RSD blue
Now for the parts that are NEW IN PACKAGE. Quantity, description, item #
8x Steering knuckle (2) 401363
6x 4* Caster blocks (2) 401455
1x Xhard front arms (2) 401623
1x Hard front arms (2) 401452
1x Xhard rear arms (2) 401624
2x Driveshaft blades (16) 401409
2x Front belt 401351
1x Rear belt 401353
1x Rear hingepins (2) 401403
1x Front Hingepins (2) 401386
2x Rear uprights (2) 401454
1x Split block 0/2 401585
1x Solid block 2.5 401419
1x Nylon spool 401533
1x Ballcup pack 411206
1x Swaybar collars (2) 401358
1x DJC axle inserts (2) 401614
1x Spring clip DJC pack 401615
1x 4x6 setscrews 110119
The car has been good to me, but it's time to move on. I'm leaving the setup on it that I ran last weekend. It makes a good starting point for whatever you plan to do with the car. I'll also be happy to help with any issues you may have with the car or with setup.
I have used Jaco TC tires laying around, so if you want a couple sets I'll throw some in. I have a white-bomb LTCR practice body that I can include as well if you want. Basically, add your electronics and begin your path to becoming a champion.
For the dialed roller, box and manual, loads of spare parts, tires and body (if you want them), and most importantly sticker sheets, $500 shipped within the US NO TRADES. I am not interested in your aluminum T-Maxx.
The used RC market is unpredictable and I'm a bad judge of value, but this car is fast and there's plenty of parts so don't lowball me or I'll passive-aggressively harass you on the forums.
Thank you for looking!
The car will also include the box, manual, tons of spare parts, and (most importantly) some stickers.
Regarding the car itself.....
There are NO electronics included.
"Aftermarket parts" include a custom hard CF chassis plate, titanium screws, a front 2.5mil gear diff, XRAY rear axles and XRAY rear gear diff, machined pistons, ti-nitride shock shafts, and extra-hard suspension arms. Other goodies include DJC front driveshafts, XRAY 2.5 springs, and aluminum camberlinks.
Now for the SPARE PARTS..... unless you routinely bend bulkheads somehow, you'll be covered.
Parts NOT in the package include the following......
AVID aluminum chassis
Stock CF chassis
Custom "soft" CF chassis
2 gear diffs
1 spool assembly
1.2 rear, 1.2 front, and 1.4 front swaybars
A pile of extra suspension arms and caster blocks
Spare DJC and straight axles
Bag of bearings
Extra shock pistons, orings, shafts, etc.
Chassis stiffener brace
1,1.5,2, and 3 solid arm mounts
1/1 and 1.5/.5 split arm mounts
Older version motormount
92t spur (for stock classes)
Springs!
A pair of Yokomo blue, purple, and pink
2 pair Serpent black
2 pair RSD white, 2 pair RSD light blue, 1 pair RSD blue
Now for the parts that are NEW IN PACKAGE. Quantity, description, item #
8x Steering knuckle (2) 401363
6x 4* Caster blocks (2) 401455
1x Xhard front arms (2) 401623
1x Hard front arms (2) 401452
1x Xhard rear arms (2) 401624
2x Driveshaft blades (16) 401409
2x Front belt 401351
1x Rear belt 401353
1x Rear hingepins (2) 401403
1x Front Hingepins (2) 401386
2x Rear uprights (2) 401454
1x Split block 0/2 401585
1x Solid block 2.5 401419
1x Nylon spool 401533
1x Ballcup pack 411206
1x Swaybar collars (2) 401358
1x DJC axle inserts (2) 401614
1x Spring clip DJC pack 401615
1x 4x6 setscrews 110119
The car has been good to me, but it's time to move on. I'm leaving the setup on it that I ran last weekend. It makes a good starting point for whatever you plan to do with the car. I'll also be happy to help with any issues you may have with the car or with setup.
I have used Jaco TC tires laying around, so if you want a couple sets I'll throw some in. I have a white-bomb LTCR practice body that I can include as well if you want. Basically, add your electronics and begin your path to becoming a champion.
For the dialed roller, box and manual, loads of spare parts, tires and body (if you want them), and most importantly sticker sheets, $500 shipped within the US NO TRADES. I am not interested in your aluminum T-Maxx.
The used RC market is unpredictable and I'm a bad judge of value, but this car is fast and there's plenty of parts so don't lowball me or I'll passive-aggressively harass you on the forums.
Thank you for looking!