HPI Pro 4 Rolling Chassis Hop Ups included
#1
HPI Pro 4 Rolling Chassis Hop Ups included
I have a hopped up Pro 4 with tons of hopups and spares hopups include:
Hpi Graphite Bumper brace Hpi Graphite Camber Plates / Front and Rear Alum. servo mount Hpi Alum input shaft set Hpi Machined Heatsink Motormount Upper deck mod $200.00 shipped pics e-mail [email protected]
Extra Parts Include: Extra NIP Alum Hexes NIP Hpi front solid front spool (2) NIP complete rear Diffs (5) NIP drive shafts (cvds) Extra Center drive shaft NIP 1.3 and 1.2 sway bars Extra NIP front or rear Alum input shaft set. Arms Camber plates 4 degree C hubs 5 extra Spur gears (98,97,96...) NIP front Block and Hub set and lots of hardware for the pro4 ect.ect.
Over 500 in car and parts. NEED TO SELLLLLL!!!!!!
With body in Picture
SOLD
I also have a Tamiya TA05 has been run 1 day only on an indoor asphalt track (So bottom has scratches). With the exception of the bottom scratches-car looks never run from the top. Some upgrades installed have never seen the track.
Heres the upgrades :
Front and rear universals ($50)
Rear carbon fiber shock tower
Type A tires on white dish rims (Run on carpet only).
Front one-way (Stock diff comes with as well)
Two Aramid belts
JR8450 high speed digital servo (I cut the ear to fit the car-so it only fits this car. ($100.00)
Ferrari body (A little dinged up) yellow
Original parts, box, tires/wheels and manual.
PRS 64 p spur gear and Tamiya spur gears.
Hex head scews.
Again-cars immaculate except for bottom of tub. Diffs are butter smooth, pulleys pristine white, etc.
More than $400 invested. $240 shipped in the US.
PayPal is fine as is MO and USPS Cert. checks.
Email [email protected] for pics
Hpi Graphite Bumper brace Hpi Graphite Camber Plates / Front and Rear Alum. servo mount Hpi Alum input shaft set Hpi Machined Heatsink Motormount Upper deck mod $200.00 shipped pics e-mail [email protected]
Extra Parts Include: Extra NIP Alum Hexes NIP Hpi front solid front spool (2) NIP complete rear Diffs (5) NIP drive shafts (cvds) Extra Center drive shaft NIP 1.3 and 1.2 sway bars Extra NIP front or rear Alum input shaft set. Arms Camber plates 4 degree C hubs 5 extra Spur gears (98,97,96...) NIP front Block and Hub set and lots of hardware for the pro4 ect.ect.
Over 500 in car and parts. NEED TO SELLLLLL!!!!!!
With body in Picture
SOLD
I also have a Tamiya TA05 has been run 1 day only on an indoor asphalt track (So bottom has scratches). With the exception of the bottom scratches-car looks never run from the top. Some upgrades installed have never seen the track.
Heres the upgrades :
Front and rear universals ($50)
Rear carbon fiber shock tower
Type A tires on white dish rims (Run on carpet only).
Front one-way (Stock diff comes with as well)
Two Aramid belts
JR8450 high speed digital servo (I cut the ear to fit the car-so it only fits this car. ($100.00)
Ferrari body (A little dinged up) yellow
Original parts, box, tires/wheels and manual.
PRS 64 p spur gear and Tamiya spur gears.
Hex head scews.
Again-cars immaculate except for bottom of tub. Diffs are butter smooth, pulleys pristine white, etc.
More than $400 invested. $240 shipped in the US.
PayPal is fine as is MO and USPS Cert. checks.
Email [email protected] for pics
Last edited by fire929; 11-15-2005 at 06:21 PM.
#3
Tech Rookie
#4
#13
Tech Adept
Money Sent