EXCELLENT condition Mod and 19-T motors
11-08-2005, 04:00 PM
#1
EXCELLENT condition Mod and 19-T motors
I've got a few mod and 19-turn motors I'll sell. All are VERY lightly used and look like new--no globby lumps of solder, etc like on MOST used motors I've seen. They are well cared-for and in great condition--kept in a motor case when not in use (pic for illustration purposes only...case is not for sale). If you want more detailed pics of any of these motors just ask and provide your e-mail address.
Prices toward bottom of message.
There are four Orion Revolution V-2 motors:
8-turn Single--Comm never cut, has run 4 packs ever
9-turn Double--Comm never cut, has run 3 packs ever
10-turn Double--Comm cut 2X
11-turn Double--Comm cut 1X
The discounters (Stormer, et al) sell these for $60 each.
Reedy KR 8-turn Double--Comm never cut, has run 3 packs ever...this one is ready for a cut and re-brush. I'll throw in a pair of Reedy #767 brushes with this motor.
The discounters sell these for $55
Reedy Quad-Mag 19-turn--Comm never cut, has run 4-packs...looking at the com you can see it has been run, but NO evidence of heat, brushes still show serations.
Discounters sell these for $38
2X Trinity Chameleon Pro 19-Turn--Comm never cut, run 4 packs each...again, looking at the comm you can see they've been run but no evidence of heat and brushes still show serations.
Discounters sell these for $35
The only one of these motors I wouldn't install in my car for a main tomorrow is the Reedy KR. There are NO disappointments here.
Following prices are all "plus shipping":
I'll sell the Orion mods for $40 each or all four for $150
I'll sell the KR for $35
I'll sell the Reedy Quad mag for $25
I'll sell the either Chameleon for $25 or $45 for the pair
Buy all eight motors for $240 and I'LL pay the shipping to US addresses.
I can provide references who are some of the most reputable names on RCTech or check my blemish-free in over 7 years feedback on e-Bay under ssmith2.
Scottrik
Prices toward bottom of message.
There are four Orion Revolution V-2 motors:
8-turn Single--Comm never cut, has run 4 packs ever
9-turn Double--Comm never cut, has run 3 packs ever
10-turn Double--Comm cut 2X
11-turn Double--Comm cut 1X
The discounters (Stormer, et al) sell these for $60 each.
Reedy KR 8-turn Double--Comm never cut, has run 3 packs ever...this one is ready for a cut and re-brush. I'll throw in a pair of Reedy #767 brushes with this motor.
The discounters sell these for $55
Reedy Quad-Mag 19-turn--Comm never cut, has run 4-packs...looking at the com you can see it has been run, but NO evidence of heat, brushes still show serations.
Discounters sell these for $38
2X Trinity Chameleon Pro 19-Turn--Comm never cut, run 4 packs each...again, looking at the comm you can see they've been run but no evidence of heat and brushes still show serations.
Discounters sell these for $35
The only one of these motors I wouldn't install in my car for a main tomorrow is the Reedy KR. There are NO disappointments here.
Following prices are all "plus shipping":
I'll sell the Orion mods for $40 each or all four for $150
I'll sell the KR for $35
I'll sell the Reedy Quad mag for $25
I'll sell the either Chameleon for $25 or $45 for the pair
Buy all eight motors for $240 and I'LL pay the shipping to US addresses.
I can provide references who are some of the most reputable names on RCTech or check my blemish-free in over 7 years feedback on e-Bay under ssmith2.
Scottrik
Last edited by Scottrik; 06-27-2008 at 04:21 PM.
11-08-2005, 08:38 PM
#2
motors
Interested would you take 200 shipped they are used and some of prices are close to what I pay new thanks
11-09-2005, 06:10 AM
#5
Butch--YGPM
Still available. Prefer to sell the lot and willing to deal a little toward that end, but I'm by no means desperate to see these off. Just not running mod like I thought I was going to and have a couple other older motors that will serve my needs to that end since they've been kept in similar condition.
I will be happy to provide more detailed pics by e-mail to interested parties...they really do look and run like new (other than the KR which just needs a comm cut and brushes). As I said, there are NO disappointments here.
Scottrik
Still available. Prefer to sell the lot and willing to deal a little toward that end, but I'm by no means desperate to see these off. Just not running mod like I thought I was going to and have a couple other older motors that will serve my needs to that end since they've been kept in similar condition.
I will be happy to provide more detailed pics by e-mail to interested parties...they really do look and run like new (other than the KR which just needs a comm cut and brushes). As I said, there are NO disappointments here.
Scottrik
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
