Tamiya TRF418 roller or ARTR and TB03 roller
#1
Tamiya TRF418 roller or ARTR and TB03 roller
Selling a couple of cars to thin down my collection. What you see is what you get, sold in as-is condition. Prices include shipping to the lower 48 with payments through PayPal only. Please PM with any questions or inquiries, thanks for looking.
TRF418 - roller and spare parts (no electronics) $0LD, this car was only driven on carpet in Sportsman or GT10 class (17.5T).
Lightweight 2005 NSX body with Tamiya option high-downforce wing.
Samix carbon chassis, motor mount, battery holder and fan mount. Titanium and aluminum screws throughout and Acer Ceramic bearings.
Sanwa SRG-BR servo and Spec-R floating steering conversion, Spec-R servo saver.
Sanwa SV-Zero Plus ESC with integrated receiver.
Express Killshot Double Torque 17.5T, Wild Turbo Fan 25mm ESC and 40mm motor fans.
VBC carbon bumper brace with holder, MyLaps 3-wire transponder, Active Hobby aluminum C-hubs. Raceberry carbon front and rear low-profile shock towers, Tamiya Mini low-profile shocks with tuned springs.
Spares include: some NIP with some having multiples
Used spares: arms, knuckles, uprights and diffs. Gear diffs have varying oil weights.
Samix aluminum chassis (tweaked, fixable), two stock carbon chassis (one had a chip, glued), NIP stock carbon top-deck, stock carbon shock towers, TRF shocks, motor and servo mount.
Tamiya TB03 IFS roller - $240
This car has been a proven A-main qualifier in TCS GT3 class racing.
Installed hopups include:
- aluminum: turn buckles, rockers, motor mount, prop shaft, wheel hexes, rear shock tower mount, servo mounts, suspension mounts and TRF shocks
- carbon: rear shock tower, bumper brace and battery brace
- front spool
- rear ball diff
- front DCJs
- rear CVDs
- front/rear sway bars
- tuned springs
- lightweight foam bumper
- Ferrari 599XX body
TRF418 - roller and spare parts (no electronics) $0LD, this car was only driven on carpet in Sportsman or GT10 class (17.5T).
Lightweight 2005 NSX body with Tamiya option high-downforce wing.
Samix carbon chassis, motor mount, battery holder and fan mount. Titanium and aluminum screws throughout and Acer Ceramic bearings.
Sanwa SRG-BR servo and Spec-R floating steering conversion, Spec-R servo saver.
Sanwa SV-Zero Plus ESC with integrated receiver.
Express Killshot Double Torque 17.5T, Wild Turbo Fan 25mm ESC and 40mm motor fans.
VBC carbon bumper brace with holder, MyLaps 3-wire transponder, Active Hobby aluminum C-hubs. Raceberry carbon front and rear low-profile shock towers, Tamiya Mini low-profile shocks with tuned springs.
Spares include: some NIP with some having multiples
Used spares: arms, knuckles, uprights and diffs. Gear diffs have varying oil weights.
Samix aluminum chassis (tweaked, fixable), two stock carbon chassis (one had a chip, glued), NIP stock carbon top-deck, stock carbon shock towers, TRF shocks, motor and servo mount.
Tamiya TB03 IFS roller - $240
This car has been a proven A-main qualifier in TCS GT3 class racing.
Installed hopups include:
- aluminum: turn buckles, rockers, motor mount, prop shaft, wheel hexes, rear shock tower mount, servo mounts, suspension mounts and TRF shocks
- carbon: rear shock tower, bumper brace and battery brace
- front spool
- rear ball diff
- front DCJs
- rear CVDs
- front/rear sway bars
- tuned springs
- lightweight foam bumper
- Ferrari 599XX body
Last edited by R3DB16; 07-11-2015 at 06:53 PM. Reason: Price drop
#3
Trf418
How much for the trf 418 toller and all the spare parts??
#5
If you still have it within the next two weeks i will deff take it as alot of the spare suspension oarts fit my 419 and i could use another chassis for usgt/vta
#7
How much would you take for a deposit?
#10
Email me as i very rarely check this site and its much easier for me to get back to you. [email protected] thank you