FS: VBC D06 w/lots of option parts and spares
#1
FS: VBC D06 w/lots of option parts and spares
For sale is one VBC D06 with lots of options parts and spares. This car is in really good condition and includes a lot of extras - perfect for someone looking to get started with sedan or looking for a second car!
SOLD!!!
PM me if interested!
Included in the sale is the following:
VBC D06 with the following option parts:
- Standard and flex chassis plates
- Standard and flex top decks
- Roche DCJs
- TiNi shock shafts
- TiNi inner and outer hingepins
- Titanium and Aluminum screws throughout
- Titanium turnbuckles throughout
- Option aluminum rear driveshafts
- Option aluminum Spool with steel outdrives
- Rear gear diff has option steel outdrives
- Long spring conversion, with aluminum lower spring retainers
- All option and stock springs
- Option and stock swaybars
- Option 0.5 mm block spacers
- Option Roche red body height adjusters for rear body posts
- Xray T4 front bumper with carbon upper bumper plate
Following spares are included:
- 1x BNIP V2 suspension arm set
- 1x BNIP battery mount set
- 1x BNIP rear suspension upright (composite)
- 2x BNIP front belts
- 1x BNIP rear belt
- 1x BNIP stabilizer connector/collar set
- 1x BNIP 5x8 ball bearing (for the layshaft)
- 1x BNIP steering stiffener bar
- 1x BNIP M2x10 shaft pin
- 1x BNIP M2x12 shaft pin
- 1x BNIP arm pin pivot balls
- 1x BNIP steering cone washers
- 2x BNIP steering swivel tubes (top hats)
- 1x BNIP gear diff o-ring set
- 1x BNIP shaft sealer o-ring set
- 1x BNIP right rear bulkhead, aluminum
- Several sets of shock bladders, variety of colours
- 7x Right c-hubs, some used, some new
- Brand new (not in packaging) set of front body posts with upper and lower bumper plastics
- 7x rear uprights, some used, some new
- 2x rear arms, new
- 3x front arms, used
- 3x steering blocks (2 used, 1 new)
- 1x spare front belt
- 1x spare rear belt
- 2x gear diffs, both filled with 2.5m cst
- 2x pairs aluminum gear diff outdrives
- 1x P00 block
- 1x pair of C05 blocks
- Extra ballstuds (variety)
- Extra ballcups (variety)
- more!
PM me if interested and thanks for looking!
SOLD!!!
SOLD!!!
PM me if interested!
Included in the sale is the following:
VBC D06 with the following option parts:
- Standard and flex chassis plates
- Standard and flex top decks
- Roche DCJs
- TiNi shock shafts
- TiNi inner and outer hingepins
- Titanium and Aluminum screws throughout
- Titanium turnbuckles throughout
- Option aluminum rear driveshafts
- Option aluminum Spool with steel outdrives
- Rear gear diff has option steel outdrives
- Long spring conversion, with aluminum lower spring retainers
- All option and stock springs
- Option and stock swaybars
- Option 0.5 mm block spacers
- Option Roche red body height adjusters for rear body posts
- Xray T4 front bumper with carbon upper bumper plate
Following spares are included:
- 1x BNIP V2 suspension arm set
- 1x BNIP battery mount set
- 1x BNIP rear suspension upright (composite)
- 2x BNIP front belts
- 1x BNIP rear belt
- 1x BNIP stabilizer connector/collar set
- 1x BNIP 5x8 ball bearing (for the layshaft)
- 1x BNIP steering stiffener bar
- 1x BNIP M2x10 shaft pin
- 1x BNIP M2x12 shaft pin
- 1x BNIP arm pin pivot balls
- 1x BNIP steering cone washers
- 2x BNIP steering swivel tubes (top hats)
- 1x BNIP gear diff o-ring set
- 1x BNIP shaft sealer o-ring set
- 1x BNIP right rear bulkhead, aluminum
- Several sets of shock bladders, variety of colours
- 7x Right c-hubs, some used, some new
- Brand new (not in packaging) set of front body posts with upper and lower bumper plastics
- 7x rear uprights, some used, some new
- 2x rear arms, new
- 3x front arms, used
- 3x steering blocks (2 used, 1 new)
- 1x spare front belt
- 1x spare rear belt
- 2x gear diffs, both filled with 2.5m cst
- 2x pairs aluminum gear diff outdrives
- 1x P00 block
- 1x pair of C05 blocks
- Extra ballstuds (variety)
- Extra ballcups (variety)
- more!
PM me if interested and thanks for looking!
SOLD!!!
Last edited by LloydLoar; 04-02-2015 at 11:24 AM.