Axial Yeti VP Modded w/pricing options...... FS/FT
#1
Axial Yeti VP Modded w/pricing options...... FS/FT
PayPal ONLY. I will ship to ConUS 48 W/Tracking USPS. No International Shipping. All PP & RCTECH rules apply.
I have an extremely nice with very little use Axial ARTR Yeti for sale or trade with a few extra parts. Bought fully modified with zero runs. I have roughly 17 packs through this and it has normal wear and tear but very well taken care of from day 1. As you can tell from the pictures i am not a basher. Never been in the rocks and motor / ESC has never thermaled. I tune and judge my runs times with a Temp Gun.
• Stock Electronics (Vanguard ESC, Vanguard 3150kV Motor, Tactic Servo & Tx/Rx)
Installed Parts ($815 before tax & Shipping)
• VP Curry Rockjock 70 OCP Axle
• Axial HD Bevel Gears (43T/13T) F/R
• FI Spool in Rear and Open in Front
• VP Aluminum Trailing Arms
• VP Yeti Titanium Rear Upper Suspension Links
• VP Yeti Titanium Front Links
• VP Front Knuckles
• VP Yeti Steering Rack Black
• VP Yeti Double Sheer Steering Rack Posts
• Axial Yeti Universal Axles
• Blue Monkey Modified Front diff housing
• VP 12mm Clamping Hex Hub
• VP SLW Hex Hubs F/R
• VP Method 105 - 2.2's w/LURC Scale Hardware
• Carter Fab 1" wheel cans
• Voodoo Gold's
• Crawler Innovations Single Stage Closed Cell Foams
• Carter Fab Roof Panel
• Axial Springs Blue - Front and Stock Rear
Extra Parts
• NIP - RPM Arms
• NIP - HPI Bevel Gear Set
• NIP - Lunsford 3x40mm Screws
• NIP - Axial 32P/64T Spur Gear
• NIP - Axial Slipper Pads
• NIP - DCW Servo Saver Lockout aka Dude Rang
• NIP - RB Products Differential Outdrive Boots-(Qty 4)
• Savox SC-1256TG (.15 sec/60 - 277.7 oz-in @6v)
• Stock Roof
• Pro-Line Cherokee Body 95% Trimmed
$TRADED
Thanks for Looking. PM with Questions or additional pics.
Can be traded as ARTR, Roller, Silder or ?? for a go fast rig RTR, ARTR, Roller or slider. Looking for a U4 Rig, FOFF, Yeti XL, Go Fast 1/8 MT, Buggy, Truggy or whatever goes fast (No On Road).
I have an extremely nice with very little use Axial ARTR Yeti for sale or trade with a few extra parts. Bought fully modified with zero runs. I have roughly 17 packs through this and it has normal wear and tear but very well taken care of from day 1. As you can tell from the pictures i am not a basher. Never been in the rocks and motor / ESC has never thermaled. I tune and judge my runs times with a Temp Gun.
• Stock Electronics (Vanguard ESC, Vanguard 3150kV Motor, Tactic Servo & Tx/Rx)
Installed Parts ($815 before tax & Shipping)
• VP Curry Rockjock 70 OCP Axle
• Axial HD Bevel Gears (43T/13T) F/R
• FI Spool in Rear and Open in Front
• VP Aluminum Trailing Arms
• VP Yeti Titanium Rear Upper Suspension Links
• VP Yeti Titanium Front Links
• VP Front Knuckles
• VP Yeti Steering Rack Black
• VP Yeti Double Sheer Steering Rack Posts
• Axial Yeti Universal Axles
• Blue Monkey Modified Front diff housing
• VP 12mm Clamping Hex Hub
• VP SLW Hex Hubs F/R
• VP Method 105 - 2.2's w/LURC Scale Hardware
• Carter Fab 1" wheel cans
• Voodoo Gold's
• Crawler Innovations Single Stage Closed Cell Foams
• Carter Fab Roof Panel
• Axial Springs Blue - Front and Stock Rear
Extra Parts
• NIP - RPM Arms
• NIP - HPI Bevel Gear Set
• NIP - Lunsford 3x40mm Screws
• NIP - Axial 32P/64T Spur Gear
• NIP - Axial Slipper Pads
• NIP - DCW Servo Saver Lockout aka Dude Rang
• NIP - RB Products Differential Outdrive Boots-(Qty 4)
• Savox SC-1256TG (.15 sec/60 - 277.7 oz-in @6v)
• Stock Roof
• Pro-Line Cherokee Body 95% Trimmed
$TRADED
Thanks for Looking. PM with Questions or additional pics.
Can be traded as ARTR, Roller, Silder or ?? for a go fast rig RTR, ARTR, Roller or slider. Looking for a U4 Rig, FOFF, Yeti XL, Go Fast 1/8 MT, Buggy, Truggy or whatever goes fast (No On Road).
Last edited by cmbscx10; 03-12-2015 at 05:00 PM. Reason: Traded Not Sold Item
#5
Dang that went quick, I wish I would have seen this earlier