FS: 1/8 Ebuggy / 4WD SCT Electronics
#1
FS: 1/8 Ebuggy / 4WD SCT Electronics
Line #1: **SOLD** Viper VTX8 ESC - Purchased new last season and ran it in a TLR SCTE 2.0 for about 10-12 race days. Never had a problem with it, still has original wires on it. Has a Deans connector for the battery, bullet connectors for the motor. Asking $160 shipped. **SOLD**
Line #2: **SOLD** Viper VTX8 ESC - Purchased used from another RCTech user this spring. I replaced the fan and motor/battery wires. The wire harness that goes to the switch/programming port had damaged insulation on the wires. I repaired it with liquid tape. The lead that runs to the receiver was also damaged, replaced the plug and covered the wires with silicone wire sleeving. Updated the firmware, ran flawlessly in a 1/8 ebuggy for 5-6 race days this summer. Is wired with two Deans connectors for running two 2s batteries as a 4s. Bullet connectors on the motor leads. Asking $80 shipped. **SOLD**
Line #3: **SOLD**Viper ProGauge - Works fine. Asking $20 shipped if purchased alone, $10 shipped if purchased with one of the ESC's above. **SOLD**
Line #4: **SOLD** Trackstar 2100KV 1/8 scale ebuggy motor. Purchased new, ran 5-6 race days. Asking $35 shipped. Comes with sensor cable. **SOLD**
Line #5: **SOLD**Novak Ballistic 4.5t 550 SCT motor. Purchased used on Ebay. Ran flawlessly 15-18 race days in a TLR SCTE 2.0. Updated sensor assembly, comes with sensor cable, and custom machined/anodized heatsink/fan assembly. Asking $30 shipped. **SOLD**
Line #6: **SOLD**Savox SC-1258TG servo. Purchased new, ran in that same TLR SCTE for 10-12 race days. Lead has been shortened to about 3" long. Original plug was cut off and new ends were crimped on - servo has not been opened. I will include what ever hardware I can find for it (no promises I'll find anything). Asking $40 shipped. Update: a 6" extension cable will be included with servo. **SOLD**
Line #7: **SOLD** Associated XP DS1313. Purchased new, ran 5-6 race days in a 1/8 Ebuggy. Lead has been shortened to about 4" long. Original plug was cut off and new ends were crimped on - servo has not been opened. I will include what ever hardware I can find for it (no promises I'll find anything). Aluminum arm will be included. Asking $50 shipped. Update: a 6" extension cable will be included with servo. **SOLD**
Line #8: **SOLD** Durango DEX408 V1. Purchased used on Ebay. Seller claimed it had one race day on it and I believe them. I raced it 5-6 race days with no issues. I did convert the rear end to have the shocks mounted to the rear of the rear arms. Have 2 sets of tires for it, like new AKA Enduros (soft/red insert) and some Hotbodies tires that aren't much good. Have 2 bodies for it, both stock. One is damaged but still useable. The other one I purchased and ran 2-3 race days and is in good shape. I have a few spares for it, notables include a diff housing and a spur gear (both NIP). Asking $200 + $35 shipping. **SOLD**
Will be posting pictures soon, PM me if you want more info. I will work with you if you want to buy multiple items.
Line #2: **SOLD** Viper VTX8 ESC - Purchased used from another RCTech user this spring. I replaced the fan and motor/battery wires. The wire harness that goes to the switch/programming port had damaged insulation on the wires. I repaired it with liquid tape. The lead that runs to the receiver was also damaged, replaced the plug and covered the wires with silicone wire sleeving. Updated the firmware, ran flawlessly in a 1/8 ebuggy for 5-6 race days this summer. Is wired with two Deans connectors for running two 2s batteries as a 4s. Bullet connectors on the motor leads. Asking $80 shipped. **SOLD**
Line #3: **SOLD**Viper ProGauge - Works fine. Asking $20 shipped if purchased alone, $10 shipped if purchased with one of the ESC's above. **SOLD**
Line #4: **SOLD** Trackstar 2100KV 1/8 scale ebuggy motor. Purchased new, ran 5-6 race days. Asking $35 shipped. Comes with sensor cable. **SOLD**
Line #5: **SOLD**Novak Ballistic 4.5t 550 SCT motor. Purchased used on Ebay. Ran flawlessly 15-18 race days in a TLR SCTE 2.0. Updated sensor assembly, comes with sensor cable, and custom machined/anodized heatsink/fan assembly. Asking $30 shipped. **SOLD**
Line #6: **SOLD**Savox SC-1258TG servo. Purchased new, ran in that same TLR SCTE for 10-12 race days. Lead has been shortened to about 3" long. Original plug was cut off and new ends were crimped on - servo has not been opened. I will include what ever hardware I can find for it (no promises I'll find anything). Asking $40 shipped. Update: a 6" extension cable will be included with servo. **SOLD**
Line #7: **SOLD** Associated XP DS1313. Purchased new, ran 5-6 race days in a 1/8 Ebuggy. Lead has been shortened to about 4" long. Original plug was cut off and new ends were crimped on - servo has not been opened. I will include what ever hardware I can find for it (no promises I'll find anything). Aluminum arm will be included. Asking $50 shipped. Update: a 6" extension cable will be included with servo. **SOLD**
Line #8: **SOLD** Durango DEX408 V1. Purchased used on Ebay. Seller claimed it had one race day on it and I believe them. I raced it 5-6 race days with no issues. I did convert the rear end to have the shocks mounted to the rear of the rear arms. Have 2 sets of tires for it, like new AKA Enduros (soft/red insert) and some Hotbodies tires that aren't much good. Have 2 bodies for it, both stock. One is damaged but still useable. The other one I purchased and ran 2-3 race days and is in good shape. I have a few spares for it, notables include a diff housing and a spur gear (both NIP). Asking $200 + $35 shipping. **SOLD**
Will be posting pictures soon, PM me if you want more info. I will work with you if you want to buy multiple items.
Last edited by kingofcool999; 11-21-2014 at 08:52 AM. Reason: Updates, price changes
#9
PM sent regarding line #2.