Tekno SCT410 with RX8gen2 & Pro4 - RTR with extras & spares
07-26-2014, 07:44 AM
#1
Tekno SCT410 with RX8gen2 & Pro4 - RTR with extras & spares
Hey guys, time to cut back on the number of cars I have so first to go is my SCT410. I hate to see it go because its been an awesome truck but e-buggy is just more my thing so instead of hanging on to this I'll let it go to somebody that will do more than look at it 
I bought this and the motor/esc new in February and built it to race Motorama and have only raced it a few times since then, plus some practice nights here and there. This is and always was a race truck, not a basher so its not abused. All the wear and tear is from normal racing. All you will need is a receiver and transponder if you choose to race it.
The truck includes the following:Tekin RX8gen2 ESC & Tekin Pro4 4600 motor (case is cracked above the fan like most are but doesn't effect it)
Hitec 7954 servo with aluminum servo horn
JConcepts Nissan Titan body (few normal SCT cracks but still very usable)
AKA Gridiron tires on Avid wheels (about 75% tread left)
AKA Enduro tires on Avid wheels (one wheel has a stripped hex but tires are one race old)
Set of 4 Avid wheels just waiting for tires
All the spare parts pictured including front arms, spur gear, shock springs and pistons, etc (pars box not included, only the parts inside)
CSI red pistons (currently in the shocks)
Avid bearing set (only missing a few bearings)
----Just add your receiver and you are ready to go----
Now parting it out, prices are as follows:
SOLD - Roller/body/parts (I won't separate this stuff any farther)
SOLD - ESC with hotwire
$75 - Pro4 motor
$40 - AKA Gridiron II tires on Avid wheels
$30 - AKA Enduro tires on Avid wheels (one wheel has stripped hex but tires are 1 run old)
I bought this and the motor/esc new in February and built it to race Motorama and have only raced it a few times since then, plus some practice nights here and there. This is and always was a race truck, not a basher so its not abused. All the wear and tear is from normal racing. All you will need is a receiver and transponder if you choose to race it.
The truck includes the following:Tekin RX8gen2 ESC & Tekin Pro4 4600 motor (case is cracked above the fan like most are but doesn't effect it)
Hitec 7954 servo with aluminum servo horn
JConcepts Nissan Titan body (few normal SCT cracks but still very usable)
AKA Gridiron tires on Avid wheels (about 75% tread left)
AKA Enduro tires on Avid wheels (one wheel has a stripped hex but tires are one race old)
Set of 4 Avid wheels just waiting for tires
All the spare parts pictured including front arms, spur gear, shock springs and pistons, etc (pars box not included, only the parts inside)
CSI red pistons (currently in the shocks)
Avid bearing set (only missing a few bearings)
----Just add your receiver and you are ready to go----
Now parting it out, prices are as follows:
SOLD - Roller/body/parts (I won't separate this stuff any farther)
SOLD - ESC with hotwire
$75 - Pro4 motor
$40 - AKA Gridiron II tires on Avid wheels
$30 - AKA Enduro tires on Avid wheels (one wheel has stripped hex but tires are 1 run old)
Last edited by mxnickj; 07-31-2014 at 05:35 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
