Hyperion Chargers (2) and Power Supply
07-23-2014, 05:56 PM
#1
Hyperion Chargers (2) and Power Supply
Getting rid of both my chargers and PS to get a dual unit, nothing wrong with any of it, just trying to consolidate my stuff.
720i is about 2 years old, still has plastic on the screen and buttons, 730i is about 6-8 months old, still has plastic on the screen and buttons too.
-----------------------------------------------------------------------------------------
Hyperion EOS720i Net3AD $100 shipped in the CONUS via USPS Priority Mail
Hyperion EOS 0720i NET3 7S 16N CHARGER AC/DC with USA Power Cord.
Integrated balancer, TCS & STORE MODE, 20A Max with 90W (AC) or 150W (DC) charger power.
Network to 300W and 14S max (2x7S balanced).
EOS 0720i NET3 AD (ac/dc input).
10.5V~29V DC (20A, 150W max charge)
100V~240V AC (20A, 90W max charge)
SYNC Charge up to 2x7S for max 14S Flightpacks at 300W max. See explanation of SYNC MODE charging below:
* 12-Bit Balance Circuit Resolution for superb accuracy
* Built-In USB DataPort and supplied USB cable
* Hardware support for EOS Control & Data Suite PC Software
* 20 Memory slots for batteries
* CYCLE mode for LiFePO4 and LiPo
* Convenient DC Cord Storage on charger bottom (see pics left)
* HP/PQ and JST XH balance adapters included (+JST EH for EU)
The NET3-AD is the most powerful AC/DC charger available today.
With AC input, it can charge a 5000mAh 2S car pack at more than 2C (~11.5A) and on DC nearly 4C (~19A).
Or on AC a 3S 2100mAh pack at can hit almost 4C, and on DC input up to 6C!
---------------------------------------------------------------------------------------------
SOLD
EOS0730i $SOLD shipped in the CONUS via USPS Priority Mail
Latest generation multi-chemestry charger
1-7S capable
Up to 30A charge current
10.5V to 29V input
Highest performance above 24V input
Network two identical chargers for SYNC charging
The Hyperion EOS0730iNET3 is the ideal charger for those charging battery packs up to 7S.
With an astonishing charge capability of 30Amps / 550W output it is possible to speed charge even larger lipos packs at 5C - a great example would be a 5000mAh 6S pack which could be refuelled in under 20 minutes.
The EOS0730iNET3 requires a 24V-29V power supply to make full use of the potential. At this input voltage the charger performs at a higher efficiency which allows for these performance levels. Of course you can still use any power supply form 10.5V. The performance is around 300W at 13.6V.
--------------------------------------------------------------------------------------------
Common Sense RC 200w 17amp Power Supply with 2 leads $30 shipped in the CONUS, or $25 combined with either charger above.
The perfect DC input power source for your charger! Just plug this into your wall socket, connect to your charger, and you'll be ready to go.
Input Voltage: 110V/220V (selectable by switch)
Output Voltage: 12V DC, provides up to 16.6 amps current
Dimensions: 2 x 4.5 x 8.5 - 1.15 lbs.
720i is about 2 years old, still has plastic on the screen and buttons, 730i is about 6-8 months old, still has plastic on the screen and buttons too.
-----------------------------------------------------------------------------------------
Hyperion EOS720i Net3AD $100 shipped in the CONUS via USPS Priority Mail
Hyperion EOS 0720i NET3 7S 16N CHARGER AC/DC with USA Power Cord.
Integrated balancer, TCS & STORE MODE, 20A Max with 90W (AC) or 150W (DC) charger power.
Network to 300W and 14S max (2x7S balanced).
EOS 0720i NET3 AD (ac/dc input).
10.5V~29V DC (20A, 150W max charge)
100V~240V AC (20A, 90W max charge)
SYNC Charge up to 2x7S for max 14S Flightpacks at 300W max. See explanation of SYNC MODE charging below:
* 12-Bit Balance Circuit Resolution for superb accuracy
* Built-In USB DataPort and supplied USB cable
* Hardware support for EOS Control & Data Suite PC Software
* 20 Memory slots for batteries
* CYCLE mode for LiFePO4 and LiPo
* Convenient DC Cord Storage on charger bottom (see pics left)
* HP/PQ and JST XH balance adapters included (+JST EH for EU)
The NET3-AD is the most powerful AC/DC charger available today.
With AC input, it can charge a 5000mAh 2S car pack at more than 2C (~11.5A) and on DC nearly 4C (~19A).
Or on AC a 3S 2100mAh pack at can hit almost 4C, and on DC input up to 6C!
---------------------------------------------------------------------------------------------
SOLD
EOS0730i $SOLD shipped in the CONUS via USPS Priority Mail
Latest generation multi-chemestry charger
1-7S capable
Up to 30A charge current
10.5V to 29V input
Highest performance above 24V input
Network two identical chargers for SYNC charging
The Hyperion EOS0730iNET3 is the ideal charger for those charging battery packs up to 7S.
With an astonishing charge capability of 30Amps / 550W output it is possible to speed charge even larger lipos packs at 5C - a great example would be a 5000mAh 6S pack which could be refuelled in under 20 minutes.
The EOS0730iNET3 requires a 24V-29V power supply to make full use of the potential. At this input voltage the charger performs at a higher efficiency which allows for these performance levels. Of course you can still use any power supply form 10.5V. The performance is around 300W at 13.6V.
--------------------------------------------------------------------------------------------
Common Sense RC 200w 17amp Power Supply with 2 leads $30 shipped in the CONUS, or $25 combined with either charger above.
The perfect DC input power source for your charger! Just plug this into your wall socket, connect to your charger, and you'll be ready to go.
Input Voltage: 110V/220V (selectable by switch)
Output Voltage: 12V DC, provides up to 16.6 amps current
Dimensions: 2 x 4.5 x 8.5 - 1.15 lbs.
Last edited by DoogieLee; 08-02-2014 at 07:01 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
