Serpent Eryx 2.0 Roller or Stock Combo
#1
Serpent Eryx 2.0 Roller or Stock Combo
This was my stock car, 3.0 was my mod car. Only going to run mod now since we are outdoors on asphalt with a BIG track
Serpent Eryx 2.0
Original Box
Protoform LTC-R Lightweight Body (Painted)
Bunch of Upgrades -
Black Springs (on the car)
Gray Springs (on the car)
Yellow Springs
Orange Springs
1.4 Front Sway Bar
1.4 Rear Sway Bar
2.0mm Carbon HARD Chassis (currently installed)
2.25mm stock chassis included
Carbon Front Body Mount Plate
DJC Front driveshaft set (on the car)
stock front driveshaft setup
Front Steel spool (on the car)
Front Plastic spool
Gear diff w/ 2.5million I used on the front for testing
Gear diff w/ 4k (currently installed in rear)
Ball Diff - Built
Ball Diff (new in package)
TiNitride Front Hinge Pins
TiNitride Rear Hinge Pins
TiNitride Front and Rear Shock Shafts (on the car)
Stock Shock Shafts included
2.0 Front-Front Holder / 2.0 Front-Rear Split Holders
3.5 Rear-Rear Holder / 0.5 Rear-Front Split Holders
Extras:
Shock Bladders NIP
Body Mount adjustable front NIP
Rear Hub Uprights (Hard) (2 Sets) NIP
Rear Hub Upright (Medium) (1 piece)
Pivot ball threaded NIP
C-Hub 4* NIP
Front Arms (Medium) (2 sets) NIP
Rear Arms (Medium) NIP
Belt Kevlar (Long Belt) NIP
Sorex 32 - 2 6 minute heats on them
Robinson Racing 69t 48p Spur
Robinson Racing 66t 48p Spur (NIP)
I can sell as a roller or sell with a Hobbywing Just Stock esc (2 races old) and an ORCA 17.5 for a little extra. You will still need servo and receiver
$250 shipped/paypaled as roller with all the extra parts
$325 shipped/paypaled including ESC and ORCA 17.5
Serpent Eryx 2.0
Original Box
Protoform LTC-R Lightweight Body (Painted)
Bunch of Upgrades -
Black Springs (on the car)
Gray Springs (on the car)
Yellow Springs
Orange Springs
1.4 Front Sway Bar
1.4 Rear Sway Bar
2.0mm Carbon HARD Chassis (currently installed)
2.25mm stock chassis included
Carbon Front Body Mount Plate
DJC Front driveshaft set (on the car)
stock front driveshaft setup
Front Steel spool (on the car)
Front Plastic spool
Gear diff w/ 2.5million I used on the front for testing
Gear diff w/ 4k (currently installed in rear)
Ball Diff - Built
Ball Diff (new in package)
TiNitride Front Hinge Pins
TiNitride Rear Hinge Pins
TiNitride Front and Rear Shock Shafts (on the car)
Stock Shock Shafts included
2.0 Front-Front Holder / 2.0 Front-Rear Split Holders
3.5 Rear-Rear Holder / 0.5 Rear-Front Split Holders
Extras:
Shock Bladders NIP
Body Mount adjustable front NIP
Rear Hub Uprights (Hard) (2 Sets) NIP
Rear Hub Upright (Medium) (1 piece)
Pivot ball threaded NIP
C-Hub 4* NIP
Front Arms (Medium) (2 sets) NIP
Rear Arms (Medium) NIP
Belt Kevlar (Long Belt) NIP
Sorex 32 - 2 6 minute heats on them
Robinson Racing 69t 48p Spur
Robinson Racing 66t 48p Spur (NIP)
I can sell as a roller or sell with a Hobbywing Just Stock esc (2 races old) and an ORCA 17.5 for a little extra. You will still need servo and receiver
$250 shipped/paypaled as roller with all the extra parts
$325 shipped/paypaled including ESC and ORCA 17.5
Last edited by Crawlin; 07-08-2014 at 06:06 AM.
#5
Free bump for a nice car!