Selling it all! Losi 22 buggy, RC10TC3, RC10T3 + gear
edit: ***I've had a few requests for certain parts, so I've individually priced everything - all prices include shipping***
edit2: ***updated pending sales*** edit3: ***sales back on - reduced prices*** I'm selling ALL of my RC gear - it's been sitting doing nothing, so I figured someone can get some great use out of it this summer! It's pretty much everything you'd need to hit the track. Newer gear: I bought all of the Losi gear recently to re-spark my interest in the hobby when I had vacation time, but now that I'm back to work, I can't make the time for it. I bought all the high-end gear and parts to get running at my local track (MHOR). I went once to practice while on break, and haven't been back. I still have my card for 2 of 3 free practice runs left! The run time on this setup is literally under 5 hours, so it's in excellent shape as seen in the pictures. The diff needs to be rebuilt (I could never figure out how to set that up right), but I have the tungsten carbide diff balls ready to go for someone to break it in! I installed all of the upgrades in when I initially built it, so all of the originals are still included. I've kept all the spare parts as well. Older gear: I recently bought new anodized shocks, motor guard, and other small parts for the T3. I also rebuilt the tranny to get it running again as a basher, but never finished that out with new electronics. The TC3 is in great shape, just needs new tires. Here's what I have: Newer: Losi 22 buggy - $250 - Losi Aluminum Servo Horn - Losi Aluminum Bleeder Caps (4) - Losi TiNitride Front King Pin - Losi Caster Block - 5 degree - Losi Aluminum Center Toe Plate - 3.5 - Losi Aluminum Differential Nut Holder (Al) - Losi Aluminum Rear Hex +1.5mm width - Losi Aluminum Toe Plate 3.5 degree - Losi Tungsten Carbide Diff Balls (still in bag) - JConcepts Bar Codes (front & rear - great shape) - full set of wheels w/ rubber bands - Painted body - Instructions & decals - Original box Orion Vortex R10 Pro ESC (w/ original box) - $140 Reedy Sonic 13.5T Brushless Motor (w/ original box) - $45 Savox SC-1257TG Digital Servo (w/ original box) - $45 Futaba 4PL Radio w/ R2104GF Rx - $160 - rechargeable batteries and charger included - original box 2 x Xcelorin 7.4V 3800mAh 60C LiPo Batteries - $50 for both LRP Quadra Pro 2 LiPo Charger - $40 - LiPo balance board - original box Track accessories - $50 - Losi Race Wrenches w/ case - Metric - Losi Offroad Ride Height Gauge - RPM Camber Gauge - DuraTrax Pit Tech Deluxe Car Stand - Losi 27.5 wt shock oil - Losi 25 wt shock oil - Associated 35 wt shock oil - Losi Diff Lube - Losi Hi-pressure Black Grease - Associated Diff Lube (1 still in package) - Associated Black Grease - AKA Premium Tire Glue - Pactra Paint (Atomic Red, Metallic Black, Backing Black) - Extra parts bin (tacklebox) - Gear bag Older: Team Associated RC10TC3 Team - $80 - Hitec HS-605MG servo - Anodized motor heatsink - Original Instructions - Painted body - original box Team Associated RC10T3 - $80 - Novak Dually Brushed ESC (w/ original box) - Venom Fireball modified 19T brushed motor - Hitec HS-422 servo - Ti turnbuckles - Anodized MIP CVDs - Teflon bearings - Blue anodized shocks (brand new) - Blue front springs - Green rear springs - Dynamite Speedpack NiCd battery w/ Deans - New tires (also 4 worn tires w/ wheels) - Painted body Futaba AM radio - Magnum 2CH w/ R122JE Rx Ch. 69 (w/ original box) - $15 Novak Millenium NiMH & NiCd charger (w/ original box) Novak N-Power AC power supply (w/ original box) - both for $20 ***I've had a few requests for certain parts, so I've individually priced everything - all prices include shipping*** Please let me know if you have any questions! I'm in Denver - you can email me, or get in touch by phone/text at 303-956-6zero62. Here's what you get! https://dl.dropboxusercontent.com/s/...k/DSC_0634.JPG Losi 22 https://dl.dropboxusercontent.com/s/...9/DSC_0639.JPG https://dl.dropboxusercontent.com/s/...w/DSC_0645.JPG https://dl.dropboxusercontent.com/s/...4/DSC_0642.JPG https://dl.dropboxusercontent.com/s/...7/DSC_0643.JPG https://dl.dropboxusercontent.com/s/...t/DSC_0646.JPG Futaba 4PL https://dl.dropboxusercontent.com/s/...p/DSC_0638.JPG LRP Quadra Pro 2 https://dl.dropboxusercontent.com/s/...f/DSC_0650.JPG Xcelorin LiPos https://dl.dropboxusercontent.com/s/...v/DSC_0651.JPG Associated TC3 Factory Team https://dl.dropboxusercontent.com/s/...x/DSC_0635.JPG Associated T3 https://dl.dropboxusercontent.com/s/...9/DSC_0637.JPG[/CODE] |
HS-805?
typo? |
Oops! Read it wrong on the servo, it was hard to see mounted up. Good catch!
Thanks Kewlbug |
To the top!
|
How much for the tc3 roller?
|
I have priced everything individually due to requests for part out - still available as a whole lot until pieces start to go.
|
Bump
|
Bump
|
Boop
|
Bump - pending sales updated
|
Sales fell through, everything back up - prices reduced
|
All times are GMT -7. It is currently 03:55 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.