*NEED A GOOD HOME FOR MY RDX*
#31
Originally Posted by Pro4Capece
I'll trade you a Yokomo LCg with parts and a Fantom Dyno for the RDX. LMK if you think this is a lowball, Fantom cost 500 new and it cost about 520 to make an LCG with stock parts.
#33
Tech Addict
iTrader: (1)
Join Date: Jan 2004
Location: princeton, NJ and wall street, NYC
Posts: 514
Trader Rating: 1 (100%+)
shookie was the sellout... kidding...
man.. this price is a bit too steep for me to chop my wallet with...
if i didn't buy crxp loads of spare parts for my pro4/bd/sd/lcg...
i would have enough to get it......
its all you fault jaybee..... why did you have to sell your pro4 to me....
now i'm running it faster then my rayspeed......
haven't build my lcg nor bd yet... but i'm stocking parts on them already...
free bump for jaybee.... very good seller.... things he gave out are great...
man.. this price is a bit too steep for me to chop my wallet with...
if i didn't buy crxp loads of spare parts for my pro4/bd/sd/lcg...
i would have enough to get it......
its all you fault jaybee..... why did you have to sell your pro4 to me....
now i'm running it faster then my rayspeed......
haven't build my lcg nor bd yet... but i'm stocking parts on them already...
free bump for jaybee.... very good seller.... things he gave out are great...
#35
hey jb i'l trade you a fantom dyno with manual and alum wheel an hard case with a labtop and a turbo 30 charger and get this a xray fk04 with spare parts to boot for your corally rdx with parts .how does that sound for a offer
#36
wow
now thats a dealio for sure
#37
Tech Master
Yikes! How could anyone pass that offer up??
#39
i guess it was worth a try better luck next time
#41
Tech Addict
Originally Posted by JayBee
Stuck between a rock-n-a hard place. I've been dreading it for awhile but I knew it would come to this ...
My RDX has been raced with twice and practiced with once. This is the one-way version but I have a 2nd diff in the car now. The car is also equipped with a P-dub bumper, Lunsford Ti-turnbuckles, front 1.3mm sway-bar, ceramic balls in both diffs (just installed) and ceramic bearings in both diffs...
Now for the goodies (all new in their packages)-
Silver spring set #79231 (complete set)
Black spring set #79230 (complete set)
*Steering blocks #79280 (2 pkgs.)
Shock absorbers #79220 (2 pkgs.)
Shock piston shafts #79222
100t Spur gears #24100 (2 pkgs.)
104t Spur gear #24104
0.5 Degree Toe-in spacers #79125
1.0 Degree Toe-in spacers #79126
Speedtechrc Ti-screw kit #STRDX
Short arms- HARD #791074 (2 pkgs.)
*Front body post set #79400 (2 pkgs.)
Body post nuts #75710
Front C-hub, M5 Screw+ Ballscrew #79290 (4 pkgs.)
Ultra low weights- 5gram #79380 (2 pkgs.)
Diff rebuild kit #79161
*Diff support rings #79199
*MIP CVD TM Bones #79182
Inner hinge pins #79110
Inner hinge pins, clips+shims #79115
Outer hinge pins #79112
Outer hinge pins, shims #79117
*Anti-roll bar/front 1.3mm #79412
Anti-roll bar/rear 1.3mm #79413
P-Dub bumper #SRC1000
Front plastic bumper #79330
Dural Front C-hub 2-Deg Left #79282
Dural Front C-hub 2-Deg Right #79283
Dural Front C-hub 4-Deg Left #79284
Dural Front C-hub 4-Deg Right #79285
Ceramic Diff balls #1010
Ceramic Ball Bearings 10x15 #1161
Ceramic Ball Bearings 12x18 #1164
Ceramic Ball Bearings 5x9 #1151 (4 pkgs.)
CVD Bones for Steel Blades #SRC79182 (2 pkgs.)
Steel Blades for MOD Bones #SRC79189 (2 pkgs.)
RDX Rear Bulkhead Rgt.-side #79205
As you can see, there's is quite a bit of money spent here. Price it out for yourselves; to be honest it's over $800 in just the spares. The car with everything I have on it can go for $300. That's $1100-plus. I've looked through the threads and I've seen what some of these others are letting theirs go for NO LOWBALLERS!! So put your latex gloves and vaseline away boys, I'm not get'n bent. If you gotta ask your mommies for the cash, do yerself a favor and go get a TC4- you'll be alot happier Take $300 away from $1100 and that's my price SHIPPED. I take paypal (plus the fee), money orders and big-faced Franklins.
I gotta strip the car of the electrics but if anyone want pics... just ask -JB
My RDX has been raced with twice and practiced with once. This is the one-way version but I have a 2nd diff in the car now. The car is also equipped with a P-dub bumper, Lunsford Ti-turnbuckles, front 1.3mm sway-bar, ceramic balls in both diffs (just installed) and ceramic bearings in both diffs...
Now for the goodies (all new in their packages)-
Silver spring set #79231 (complete set)
Black spring set #79230 (complete set)
*Steering blocks #79280 (2 pkgs.)
Shock absorbers #79220 (2 pkgs.)
Shock piston shafts #79222
100t Spur gears #24100 (2 pkgs.)
104t Spur gear #24104
0.5 Degree Toe-in spacers #79125
1.0 Degree Toe-in spacers #79126
Speedtechrc Ti-screw kit #STRDX
Short arms- HARD #791074 (2 pkgs.)
*Front body post set #79400 (2 pkgs.)
Body post nuts #75710
Front C-hub, M5 Screw+ Ballscrew #79290 (4 pkgs.)
Ultra low weights- 5gram #79380 (2 pkgs.)
Diff rebuild kit #79161
*Diff support rings #79199
*MIP CVD TM Bones #79182
Inner hinge pins #79110
Inner hinge pins, clips+shims #79115
Outer hinge pins #79112
Outer hinge pins, shims #79117
*Anti-roll bar/front 1.3mm #79412
Anti-roll bar/rear 1.3mm #79413
P-Dub bumper #SRC1000
Front plastic bumper #79330
Dural Front C-hub 2-Deg Left #79282
Dural Front C-hub 2-Deg Right #79283
Dural Front C-hub 4-Deg Left #79284
Dural Front C-hub 4-Deg Right #79285
Ceramic Diff balls #1010
Ceramic Ball Bearings 10x15 #1161
Ceramic Ball Bearings 12x18 #1164
Ceramic Ball Bearings 5x9 #1151 (4 pkgs.)
CVD Bones for Steel Blades #SRC79182 (2 pkgs.)
Steel Blades for MOD Bones #SRC79189 (2 pkgs.)
RDX Rear Bulkhead Rgt.-side #79205
As you can see, there's is quite a bit of money spent here. Price it out for yourselves; to be honest it's over $800 in just the spares. The car with everything I have on it can go for $300. That's $1100-plus. I've looked through the threads and I've seen what some of these others are letting theirs go for NO LOWBALLERS!! So put your latex gloves and vaseline away boys, I'm not get'n bent. If you gotta ask your mommies for the cash, do yerself a favor and go get a TC4- you'll be alot happier Take $300 away from $1100 and that's my price SHIPPED. I take paypal (plus the fee), money orders and big-faced Franklins.
I gotta strip the car of the electrics but if anyone want pics... just ask -JB
sell the brokomo...i cant beleive it RDX for sale thats some shit...im bitter
#43
The RDX is pretty much sold. Received partial payment already. The items I sold with the car are the Silver spring set, Ti-screw kit, 4-degree hubs, and 2sets of arms. Here's the updated parts list of what is left -
Black spring set #79230 (complete set)
*Steering blocks #79280 (2 pkgs.)
Shock absorbers #79220 (2 pkgs.)
Shock piston shafts #79222
0.5 Degree Toe-in spacers #79125
1.0 Degree Toe-in spacers #79126
*Front body post set #79400 (2 pkgs.)
Body post nuts #75710
Front C-hub, M5 Screw+ Ballscrew #79290 (4 pkgs.)
Ultra low weights- 5gram #79380 (2 pkgs.)
Diff rebuild kit #79161
*Diff support rings #79199
*MIP CVD TM Bones #79182
Inner hinge pins #79110
Inner hinge pins, clips+shims #79115
Outer hinge pins #79112
Outer hinge pins, shims #79117
*Anti-roll bar/front 1.3mm #79412
Anti-roll bar/rear 1.3mm #79413
P-Dub bumper #SRC1000
Front plastic bumper #79330
Dural Front C-hub 2-Deg Left #79282 (2 pkgs.)
Dural Front C-hub 2-Deg Right #79283 (2 pkgs.)
Ceramic Diff balls #1010
Ceramic Ball Bearings 10x15 #1161
Ceramic Ball Bearings 12x18 #1164
Ceramic Ball Bearings 5x9 #1151 (4 pkgs.)
CVD Bones for Steel Blades #SRC79182 (2 pkgs.)
Steel Blades for MOD Bones #SRC79189 (2 pkgs.)
RDX Rear Bulkhead Rgt.-side #79205
For anyone who sent PM's, I'll be sure to get back at 'cha -JB
Black spring set #79230 (complete set)
*Steering blocks #79280 (2 pkgs.)
Shock absorbers #79220 (2 pkgs.)
Shock piston shafts #79222
0.5 Degree Toe-in spacers #79125
1.0 Degree Toe-in spacers #79126
*Front body post set #79400 (2 pkgs.)
Body post nuts #75710
Front C-hub, M5 Screw+ Ballscrew #79290 (4 pkgs.)
Ultra low weights- 5gram #79380 (2 pkgs.)
Diff rebuild kit #79161
*Diff support rings #79199
*MIP CVD TM Bones #79182
Inner hinge pins #79110
Inner hinge pins, clips+shims #79115
Outer hinge pins #79112
Outer hinge pins, shims #79117
*Anti-roll bar/front 1.3mm #79412
Anti-roll bar/rear 1.3mm #79413
P-Dub bumper #SRC1000
Front plastic bumper #79330
Dural Front C-hub 2-Deg Left #79282 (2 pkgs.)
Dural Front C-hub 2-Deg Right #79283 (2 pkgs.)
Ceramic Diff balls #1010
Ceramic Ball Bearings 10x15 #1161
Ceramic Ball Bearings 12x18 #1164
Ceramic Ball Bearings 5x9 #1151 (4 pkgs.)
CVD Bones for Steel Blades #SRC79182 (2 pkgs.)
Steel Blades for MOD Bones #SRC79189 (2 pkgs.)
RDX Rear Bulkhead Rgt.-side #79205
For anyone who sent PM's, I'll be sure to get back at 'cha -JB
Last edited by JayBee; 08-22-2005 at 10:25 PM.