B4 and T4
11-05-2013, 06:15 PM
#1
B4 and T4
Up for sale is 2 B4.1’s. I am asking 110 for the one on the left. 90 for the one on the right. 160 for both
The one on the left has several FT upgrades including aluminum .5 degree rear hubs, motor plate, servo mounts, CVA’s, hex conversion and a ball diff. It has the original V2 threaded shocks, and the rear left hex retainer screw has stripped out.
The one on the right is an RTR with pin and bearing wheels. The shocks are the threaded V2 shocks with big bore spring conversion and CVA’s. All tires pictured are for this buggy. As the picture shows the transmission is apart. It will come with all parts needed to complete the tranny with gear diff. This buggy has damage to one of the screw hole that holds the servo mount to the chassis. It was ran with a loose screw and enlarged the hole. It will still hold a servo mount firmly and has been ran with no issues.
Tires included with this buggy are 2 rear rebar, 2 rear beams, 2 rear bar codes, 2 front bar codes and 2 front rebars.
I also have a T4 chassis with carbon battery hold down. This has weights glued in the corners of the chassis. 35
All prices include shipping. No trades.
The one on the left has several FT upgrades including aluminum .5 degree rear hubs, motor plate, servo mounts, CVA’s, hex conversion and a ball diff. It has the original V2 threaded shocks, and the rear left hex retainer screw has stripped out.
The one on the right is an RTR with pin and bearing wheels. The shocks are the threaded V2 shocks with big bore spring conversion and CVA’s. All tires pictured are for this buggy. As the picture shows the transmission is apart. It will come with all parts needed to complete the tranny with gear diff. This buggy has damage to one of the screw hole that holds the servo mount to the chassis. It was ran with a loose screw and enlarged the hole. It will still hold a servo mount firmly and has been ran with no issues.
Tires included with this buggy are 2 rear rebar, 2 rear beams, 2 rear bar codes, 2 front bar codes and 2 front rebars.
I also have a T4 chassis with carbon battery hold down. This has weights glued in the corners of the chassis. 35
All prices include shipping. No trades.
11-06-2013, 08:47 AM
#2
bump
11-07-2013, 08:54 AM
#3
Daily bump. Make me an offer
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
