FS: HPI Blitz with MEGA Parts Lot
10-04-2013, 05:52 PM
#1
FS: HPI Blitz with MEGA Parts Lot
***SOLD***
I am selling my HPI Blitz. I bought it as a backup truck, but I don't use it. I took it apart, cleaned it up, and rebuilt the shocks and diff. I ran a few laps on it...but haven't ran it since.
It will come with the following...
-Castle Mamba Max Pro
-Castle Link PC Programmer
-Trackstar 17.5T Motor
-Hitec 645
-FlySky FS-GT3B Radio & Receiver
-Proline Suburbs
-One set of front and rear a-arms
-STRC front and rear brace's
-New slipper clutch kit with two new pads.
-Two sets of front and rear arms.
-Gear diff currently installed.
-Ball Diff with one race day on it since rebuild new ceramic balls and bearings.
-STRC front and rear brace's installed.
-Metal front bulkhead.
-Misc STRC steering parts.
-3 spare spur gears.
-Spare transmission gears.
-Spare bumpers.
-Spare shock towers
-Spare front brace.
-Spare body posts.
-And the list goes on...see below.
It comes with a ton of spare parts...easily a couple hundred dollars worth of parts. There are so many spares, they barely all fit in there. You can almost build another roller with all these parts. The pink/white body that is kind of in the first picture is not included in the sale.
I am selling my HPI Blitz. I bought it as a backup truck, but I don't use it. I took it apart, cleaned it up, and rebuilt the shocks and diff. I ran a few laps on it...but haven't ran it since.
It will come with the following...
-Castle Mamba Max Pro
-Castle Link PC Programmer
-Trackstar 17.5T Motor
-Hitec 645
-FlySky FS-GT3B Radio & Receiver
-Proline Suburbs
-One set of front and rear a-arms
-STRC front and rear brace's
-New slipper clutch kit with two new pads.
-Two sets of front and rear arms.
-Gear diff currently installed.
-Ball Diff with one race day on it since rebuild new ceramic balls and bearings.
-STRC front and rear brace's installed.
-Metal front bulkhead.
-Misc STRC steering parts.
-3 spare spur gears.
-Spare transmission gears.
-Spare bumpers.
-Spare shock towers
-Spare front brace.
-Spare body posts.
-And the list goes on...see below.
It comes with a ton of spare parts...easily a couple hundred dollars worth of parts. There are so many spares, they barely all fit in there. You can almost build another roller with all these parts. The pink/white body that is kind of in the first picture is not included in the sale.
Last edited by tksnobords; 11-10-2013 at 06:28 AM.
10-13-2013, 01:32 PM
#5
here is a list of some of the parts.
All prices include shipping. Will sell the parts individually or the whole parts lot for $110 Shipped. If you buy the whole lot, there are more misc parts included.
SPARE PARTS ONLY (Parts storage box not included) (Electronics not included) (Truck not included).
$40 - Ball Differential with like new ceramic balls and like new bearings. I only ran the ball diff one race day.
$10 - Diff Balls (Have 10 diff balls and 10 thrust balls)
$15 - front and rear set of a-arms (have 2 front pairs and 2 rear pairs)
$8 - front OR rear set of a-arms
$8 - slipper clutch set
$8 - motor plate (Have two available, one has been drilled to make it lighter)
$20 - Aluminum Front Suspension Arm Mount
$5 - plastic bulkhead (have 3 available)
$5 - Front Chassis Brace HPI103323
$7 - Mud Flaps
$7 - Receiver Box HPI106211
$7 - Front and Rear Shock Tower
$9 - Body Mount Set HPI103327 (Have two sets of side guards)
$11 - Bumper Set HPI103330
$11 - Upper Brace Set HPI85207
$13 - Skid Plate Set HPI103328
$8 - ST Racing Concepts CNC Machined Aluminum Steering Bellcrank Parts SPTSTH103325O (I only have the part that says STRC on it that the ball studs go into).
$8 - Titanium Idler Gear Shaft HPI104138 (have 4 available)
$3 - 20T Top Gear HPI86945
$3 - Idler Gear HPI86944 (Have 3 available)
$5 - Front Axle 5x26mm HPI103360 (Have 1 pair)
All prices include shipping. Will sell the parts individually or the whole parts lot for $110 Shipped. If you buy the whole lot, there are more misc parts included.
SPARE PARTS ONLY (Parts storage box not included) (Electronics not included) (Truck not included).
$40 - Ball Differential with like new ceramic balls and like new bearings. I only ran the ball diff one race day.
$10 - Diff Balls (Have 10 diff balls and 10 thrust balls)
$15 - front and rear set of a-arms (have 2 front pairs and 2 rear pairs)
$8 - front OR rear set of a-arms
$8 - slipper clutch set
$8 - motor plate (Have two available, one has been drilled to make it lighter)
$20 - Aluminum Front Suspension Arm Mount
$5 - plastic bulkhead (have 3 available)
$5 - Front Chassis Brace HPI103323
$7 - Mud Flaps
$7 - Receiver Box HPI106211
$7 - Front and Rear Shock Tower
$9 - Body Mount Set HPI103327 (Have two sets of side guards)
$11 - Bumper Set HPI103330
$11 - Upper Brace Set HPI85207
$13 - Skid Plate Set HPI103328
$8 - ST Racing Concepts CNC Machined Aluminum Steering Bellcrank Parts SPTSTH103325O (I only have the part that says STRC on it that the ball studs go into).
$8 - Titanium Idler Gear Shaft HPI104138 (have 4 available)
$3 - 20T Top Gear HPI86945
$3 - Idler Gear HPI86944 (Have 3 available)
$5 - Front Axle 5x26mm HPI103360 (Have 1 pair)
Last edited by tksnobords; 10-15-2013 at 03:14 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
