For Sale: Onyx 245 Dual Lipo AC/DC Charger
07-28-2013, 05:18 PM
#1
For Sale: Onyx 245 Dual Lipo AC/DC Charger
Selling a like new onyx 245 charger that I no longer need. I bought it a month ago and used it to balance charge my 2S lipo saddles in my b44.2 but I am selling that also.
$70.00 shipped to lower 48. Please PM me to confirm shipping.
Includes instructions manual, original box, balance boards and aligator clips for charging.
Two independent outputs...both with balancing capable connectors: This is not the onyx 240 or onyx 235..I think this 245 charges just as good as my buddies Hitec x4 and hitec x2.
LiPo, LiFe, NiCd, NiMH...the Onyx 245 charger handles all of these batteries, with built-in balancing that maximizes their safety, longevity and performance. Its dual charging capability can keep bashers in action whose vehicles require two batteries for operation — as well as competitors running in two classes who need to charge both receiver or race packs.
General Specifications:
Stock Number: DTXP4245
AC Input: 110V AC 60Hz switching supply with U.S. plug
DC Input: 11-15V DC, built-in lead with alligator clips
Cooling Method: Fan
Protective Devices: Solid-state reverse polarity and current overload
Case Size: 7.95 x 6.1 x 1.77 in (202 x 156 x 45 mm)
Weight: 28.2 oz (801 g)
Specifications for Each Output:
Battery Types: 4-8 NiCd or NiMH (4.8-9.6V) 1-3 LiPo or LiFe (3.7-11.1V)
Battery Capacity: 100-7500mAh
Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (80W total, 40W each output)
Fast Charge Termination: Peak detection for Ni, cc/cv for lithium
Lithium Balancing Accuracy: 5mV per cell
Lithium Balancing Adapters: DuraTrax and FlightPower/Thunder Power
Lithium Maximum Node Current: 200mA
Fast Charge Safety Timer: 90 minutes
Peak Sensitivity: 8mV for NiCd, 5mV for NiMH
NiCd/MH Trickle Current: Auto (50, 100, 150, 250mA)
Controls: 3 Pushbuttons
$70.00 shipped to lower 48. Please PM me to confirm shipping.
Includes instructions manual, original box, balance boards and aligator clips for charging.
Two independent outputs...both with balancing capable connectors: This is not the onyx 240 or onyx 235..I think this 245 charges just as good as my buddies Hitec x4 and hitec x2.
LiPo, LiFe, NiCd, NiMH...the Onyx 245 charger handles all of these batteries, with built-in balancing that maximizes their safety, longevity and performance. Its dual charging capability can keep bashers in action whose vehicles require two batteries for operation — as well as competitors running in two classes who need to charge both receiver or race packs.
General Specifications:
Stock Number: DTXP4245
AC Input: 110V AC 60Hz switching supply with U.S. plug
DC Input: 11-15V DC, built-in lead with alligator clips
Cooling Method: Fan
Protective Devices: Solid-state reverse polarity and current overload
Case Size: 7.95 x 6.1 x 1.77 in (202 x 156 x 45 mm)
Weight: 28.2 oz (801 g)
Specifications for Each Output:
Battery Types: 4-8 NiCd or NiMH (4.8-9.6V) 1-3 LiPo or LiFe (3.7-11.1V)
Battery Capacity: 100-7500mAh
Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (80W total, 40W each output)
Fast Charge Termination: Peak detection for Ni, cc/cv for lithium
Lithium Balancing Accuracy: 5mV per cell
Lithium Balancing Adapters: DuraTrax and FlightPower/Thunder Power
Lithium Maximum Node Current: 200mA
Fast Charge Safety Timer: 90 minutes
Peak Sensitivity: 8mV for NiCd, 5mV for NiMH
NiCd/MH Trickle Current: Auto (50, 100, 150, 250mA)
Controls: 3 Pushbuttons
Last edited by scteonoffroad; 07-30-2013 at 01:41 PM.
07-30-2013, 02:00 PM
#3
pm sent
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
