Losi Mini 8ight LOADED & Tons of Extras!
06-10-2013, 06:33 PM
#1
Losi Mini 8ight LOADED & Tons of Extras!
Well time to move on to a new project. Bought it about 8 months ago, and ran it roughly 15-20 times mostly on 2s and the occasional 3s run always on road.
Well another price drop need to move this little buggy!
I am only asking $300 shipped!! OR $280 shipped without the brand new spare stock body and wing!! Just the upgrades, spares, extra pinions/spurs, faster brushless motor, Airtronics 94820 MG mini servo, and buggy total out to be over $580!!
PayPal Only! CONUS Only! AGAIN NO TRADES!!!!
I WILL NOT SPLIT UP THIS BUGGY OR PART IT OUT! NO TRADES WILL BE CONSIDERED!
This buggy is ARTR. I am keeping the Mamba Micro Max Pro, 2.4ghz Futaba mini receiver, 1/14 Vaterra Rally Tires, and the Thunder Power 3s lipo. Everything else you see besides the stand is for sale.You are getting the Muchmore Racing 32 degree race slicks though! Just add your ESC and RX and you're good to go!!
These race slicks hook up on any smooth parking lot!! Camber/toe/caster have all been dialed in so these slicks are in excellent condition. Valued at $40 and they are belted.
This buggy has never seen any dirt. Completely on road driven and setup. Super clean and no problems at all. I also will include a box of a bunch of pinions and Losi spurs to meet your needs if you decide to race it.
There is roughly $580 in just upgrades, 2 strong lipos, tires, and extra spare parts, extra new screws, etc. put into this little buggy including the kit itself.
That is not taking into account the buggy RTR price of around $230 if you need a radio I will throw in a Tamiya FM fineSpec radio system...used handful of times.
Specs:
Tacon 2848 4300kv Brushless Motor (New) $21
Airtronics 94820 Mini Digital High Power BB MG Servo (New) $60
LOSB1933 Aluminum Wheel Hex Set (New) $13
Avid RC Solid Stainless Axle Pins 1/16" (new) $7
LOSB1879 Aluminum Front Spindle Set and LOSB1849 (New) $20
LOSB1877 Aluminum Rear Hub Set (New) $20
LOSB1878 Aluminum Rear Spindle Carrier Set (New) $23
LOSB1899 Aluminum Rear Suspension Mount Set (New) $20
LOSB1885 Aluminum Front Suspension Mount Set (New) $20
LOSB1872 Carbon Fiber Battery Strap (New) $10
LOSB1871 Carbon Fiber Steering Drag Link (New) $8
LOSB1876 Carbon Fiber Rear Shock Tower (New) $12
LOSB1874 Carbon Fiber Front Shock Tower (New) $12
LOSB1875 Carbon Fiber Chassis Brace (New) $20
Upgraded Aluminum Proline Power Stroke Caps and bladders (No leaks!) $25
(currently running Associated 50wt shock oil on all 4)
T-Bone Racing Front and Rear Bumpers/Skid set (Lifetime Warranty) $35
Including BRAND NEW stock Losi Mini 8ight Body set and Wing $26
(Includes all decals and masks)
Throwing in lipos as well:
2x 1800mah 25C 2s Gens Ace lipo packs w/Deans plugs. ($30 Total)
Both always stored and balanced charged after use.
** PLEASE NOTE THE THUNDER POWER 3s LIPO I AM KEEPING!! **
Box of new spares:
3 arms front/rear and right front (New) ~$4
Stock aluminum Losi shock caps and bladders
5 pinion Novak mod .5 pinion gears (~$20)
5 extra Losi spur gears in various teeth counts mod .5 (~$10)
LOSB1929 1 Center Outdrive Set ($9)
One extra dog bone front and rear are the same lengths (New) ($5)
Throwing in tires too:
LOSB1889 Front tire set ($8)
LOSB1890 Rear Tire Set ($8)
1/10 Muchmore Racing Absolute Rubber Touring Car Tires 32 degrees (~85% tread left) ($40)
The stock Losi Mini 8ight tires/wheels have been run for about 2 minutes before I realized one of the rear aluminum hubs were not properly seated into one of the rear wheels. So the passenger rear wheel has some damage from the aluminum hex. Tread wear is not severely affected.
The only upgrades you can do to this buggy is a full carbon fiber main chassis, CVD's on all 4 corners, and the front/rear sway bar kit. None of these are essential as I only wanted to build this buggy for parking lot running.
** PLEASE NOTE THE THUNDER POWER 3s LIPO I AM KEEPING!! **
UPDATED PICS THIS MORNING OF THE ROLLER WITH SERVO AND MOTOR!
Pics of the RTR wheels/tires which actually are a great basher tire given their height and medium compound.
**note the passenger rear was not securely fixed onto the aluminum hub which is why the back of the plastic is a bit bent. This can be easily fixed as I immediately saw tire wobble.
Thanks,
Alex
Well another price drop need to move this little buggy!
I am only asking $300 shipped!! OR $280 shipped without the brand new spare stock body and wing!! Just the upgrades, spares, extra pinions/spurs, faster brushless motor, Airtronics 94820 MG mini servo, and buggy total out to be over $580!!
PayPal Only! CONUS Only! AGAIN NO TRADES!!!!
I WILL NOT SPLIT UP THIS BUGGY OR PART IT OUT! NO TRADES WILL BE CONSIDERED!
This buggy is ARTR. I am keeping the Mamba Micro Max Pro, 2.4ghz Futaba mini receiver, 1/14 Vaterra Rally Tires, and the Thunder Power 3s lipo. Everything else you see besides the stand is for sale.You are getting the Muchmore Racing 32 degree race slicks though! Just add your ESC and RX and you're good to go!!
These race slicks hook up on any smooth parking lot!! Camber/toe/caster have all been dialed in so these slicks are in excellent condition. Valued at $40 and they are belted.
This buggy has never seen any dirt. Completely on road driven and setup. Super clean and no problems at all. I also will include a box of a bunch of pinions and Losi spurs to meet your needs if you decide to race it.
There is roughly $580 in just upgrades, 2 strong lipos, tires, and extra spare parts, extra new screws, etc. put into this little buggy including the kit itself.
That is not taking into account the buggy RTR price of around $230 if you need a radio I will throw in a Tamiya FM fineSpec radio system...used handful of times.
Specs:
Tacon 2848 4300kv Brushless Motor (New) $21
Airtronics 94820 Mini Digital High Power BB MG Servo (New) $60
LOSB1933 Aluminum Wheel Hex Set (New) $13
Avid RC Solid Stainless Axle Pins 1/16" (new) $7
LOSB1879 Aluminum Front Spindle Set and LOSB1849 (New) $20
LOSB1877 Aluminum Rear Hub Set (New) $20
LOSB1878 Aluminum Rear Spindle Carrier Set (New) $23
LOSB1899 Aluminum Rear Suspension Mount Set (New) $20
LOSB1885 Aluminum Front Suspension Mount Set (New) $20
LOSB1872 Carbon Fiber Battery Strap (New) $10
LOSB1871 Carbon Fiber Steering Drag Link (New) $8
LOSB1876 Carbon Fiber Rear Shock Tower (New) $12
LOSB1874 Carbon Fiber Front Shock Tower (New) $12
LOSB1875 Carbon Fiber Chassis Brace (New) $20
Upgraded Aluminum Proline Power Stroke Caps and bladders (No leaks!) $25
(currently running Associated 50wt shock oil on all 4)
T-Bone Racing Front and Rear Bumpers/Skid set (Lifetime Warranty) $35
Including BRAND NEW stock Losi Mini 8ight Body set and Wing $26
(Includes all decals and masks)
Throwing in lipos as well:
2x 1800mah 25C 2s Gens Ace lipo packs w/Deans plugs. ($30 Total)
Both always stored and balanced charged after use.
** PLEASE NOTE THE THUNDER POWER 3s LIPO I AM KEEPING!! **
Box of new spares:
3 arms front/rear and right front (New) ~$4
Stock aluminum Losi shock caps and bladders
5 pinion Novak mod .5 pinion gears (~$20)
5 extra Losi spur gears in various teeth counts mod .5 (~$10)
LOSB1929 1 Center Outdrive Set ($9)
One extra dog bone front and rear are the same lengths (New) ($5)
Throwing in tires too:
LOSB1889 Front tire set ($8)
LOSB1890 Rear Tire Set ($8)
1/10 Muchmore Racing Absolute Rubber Touring Car Tires 32 degrees (~85% tread left) ($40)
The stock Losi Mini 8ight tires/wheels have been run for about 2 minutes before I realized one of the rear aluminum hubs were not properly seated into one of the rear wheels. So the passenger rear wheel has some damage from the aluminum hex. Tread wear is not severely affected.
The only upgrades you can do to this buggy is a full carbon fiber main chassis, CVD's on all 4 corners, and the front/rear sway bar kit. None of these are essential as I only wanted to build this buggy for parking lot running.
** PLEASE NOTE THE THUNDER POWER 3s LIPO I AM KEEPING!! **
UPDATED PICS THIS MORNING OF THE ROLLER WITH SERVO AND MOTOR!
Pics of the RTR wheels/tires which actually are a great basher tire given their height and medium compound.
**note the passenger rear was not securely fixed onto the aluminum hub which is why the back of the plastic is a bit bent. This can be easily fixed as I immediately saw tire wobble.
Thanks,
Alex
Last edited by alexchen86; 08-01-2013 at 02:26 PM. Reason: Sold and shipped for Hereticlord
