WTS: rc18r, mini-z mr02, mini 8ight

Reply Subscribe

Thread Tools

Search this Thread

12-15-2012, 05:07 PM

skyrider

Tech Addict

Thread Starter

iTrader: (15)

Join Date: Aug 2011

Posts: 696

Trader Rating: 15 (100%+)

WTS: rc18r, mini-z mr02, mini 8ight

1. Paypal or USPS money order only
2. All sales are final
3. No trades
4. No holds, whoever pays first
5. CONUS only

1. rc18r: This was one of my 1st RC and is fully loaded, bullet proof drivetrain. CF + alum everywhere. Has about every upgrade out for it with a top notch electronics package.
2. mini-z: Upgraded and race ready. Tuned for a track.
3. mini 8ight: More recent project. Basically most weak points have been upgraded and the electronics system was all replaced.

1. rc18r: needs rx/tx
Castle Creations Mamba micro pro
Castle Creations cm20 6800kv motor
Savox metal geared servo (upgraded servo saver)
3Racing Carbon fiber chassis (covered bottom with clear sheet of vinyl)
3Racing White wheels
3Racing Aluminum Shocks
3Racing Aluminum Caster blocks
3Racing Aluminum driveshaft
3Racing Titanium turnbuckles
exotek carbon fiber shock mount (front and rear)
exotek aluminum knuckles/hubs on all 4
MIP super diffs (front and rear)
MIP steel CVDs (front and rear)
Steel hex screws all around
TBR front bumper
the toyz heatsink
DP draglink (shaved down for full travel)
2x Promatch 1800mah 35C hardcase lipos (w/ charging cord)
ALSO INCLUDES
invaluable spare parts
tons of wheels (new 3racing set too)
exotek wheel arbor, bulkhead top, carbon fiber shock tower
200 shipped or 250 with dx3s and sr3100

2. mr02 2.4 ghz (need tx): This is a race ready mr02 fully upgraded and tuned to be a racer. Everything on the car is upgraded. Mostly PN Racing stuff and Reflex racing (CHECK PICTURES). All bushing in the wheels are replaced with bearings and ALL DAMPING parts are polished or wet sanded for maximum smoothness. Ball diff plate was also sanded and polished. The body you see belonged to Jacob Feinstein ( 3 times mini z world champ).
ALSO INCLUDES:
-yellow enzo body (no body clip or windshields)
-white metallic/vanilla lambo with clip (I believe murcielago)
-Unpainted ferrari f430 GT (the front support for the roof of the car is slightly bent from storage)
-A bunch of spare tires/wheels (race quality/pn racing) + carbon fiber H-plate + ANIMA II pn racing motor
-spare blue and gray chassis set
- R1wurks competition AAAs, complete set
175 shipped SOOOOOOOOOOOOOOOOOOLD

3. Losi mini 8ight SOOOOOOOOOOOOOLD
TBG truggy body (painted metallic blue and black)
alum blue locknuts
Dyed stock rims black
Castle SV2
Castle cm26 6800kv
hitech 225mg + kimbrough saver
RPM blue rod ends (NIB)
RPM lower eyelets + shock dustcovers
ONFA shocktops (comes with the 2x whole tree of parts NIB)
4x 7.4v zippy 2200mah 40c
RTR (Stock radio system) for 275 shipped
+ dx3s for 355
+ dx3s and replace the sr300 with dsm2 sr3100 for 395

Last edited by skyrider; 05-27-2013 at 02:05 AM.