JohnB

iTrader: (1)

SVR For Sale.

The car is only 7 weeks old, in stock form except has 3 hole pistons in it and front angle ball cups were replaced with a straight ones.
All bearings are in good shape and cleaned last week.
Diff and gearbox is incredible!!!
Currently set up for indoor clay medium/high bite track.
The front bottom plate that holds the back of the A-arm hinge pin shows some wear, but stills holds the pins perfectly and I haven't deemed it necessary to install the new plate.
Always ran with chassis protector so bottom of chassis looks new.
Has custom carbon fiber battery holder that enables the electronics to be installed inline and not worry about the battery shifting.
Have the orginal box and manual.

It will come as seen in picture and with tons of extra parts which most are brand new, including:
Front and Rear A-arms.
Rear upper transmission case
Caster Blocks
Steering Blocks
Complete rear driveshaft set
Front Bottom Plate (lower bulkhead)
83, 76 (on car), and 69 tooth spur gears
All the different Anti Squat plates.
One Pair extra bearings
Front shock tower
Hinge pin balls



I can include a set of tires of your choosing. I run the stock pin rear and bearing front wheels. I can put on any set of the following:
Front and/or Rear: Bar Codes in Gold compound. Any where from broken in to ghost slicks. Most with close cell foam.
Rear: Losi BK Bar in Pink compound with any where from broken in to ghost slicks. All with closed cell foam
I have a variety of pin "dirt" tires like Holeshots, Square Fuzzies and maybe some more. Let me know what tire works best at your track and I'll try to match it.

Price $300 with. No electronics included