MMP Slash - Canada Only
#1
MMP Slash - tons of upgrades and extras!
Castle Creations Mamba max pro ESC with Neu castle 2400KV 4 pole Brushless motor. The motor and ESC both have cooling fans as well ($250.00). Also installed are the following parts:
-Traxxas blue aluminium steering knuckles and carriers.
-MIP front X-duty CVD's, at $80.00 they can take a beating!
-Tekno rear carriers ( Tekno rear axles need to use these as the wheel bearing is larger than stock).
-Tekno rear bomb proof CVD's with aforementioned rear bearing carriers.
-Revo spec slipper clutch- It needs it!, this thing has amazing torque!
-STRC Aluminium Motor mount($28.00) (dark metallic color).
-Proline racing power stroke shocks front and rear ($100.00!)
-Factory Traxxas NEW TQi receiver and radio set (yes this is the one that you can view your trucks telemetry signals via your i phone or touch), 2.4ghz as well!.-This is in new condition, as the Slash was run with a Spektrum radio.
- 4X proline sc trenchers mounted on black proline short course wheels.
-4x stock tires and wheels combos (1 weel is not usable becuase the hex blew out on the first run with the 2400kv beast)
-4X dynamite short course wheels and tires.
-4X traxxas Talon 2.8 stampede rims as well (off road duty!).
-1X set of MIP rear X duty CVD's (good condition)
-1X Tekno Front set of bomb proof cvd's
-Bad condition stock body (got creative with a hobby knife!, some may like it some may not)
-Proline stampede F-150 raptor body (painted white)
-Parma Body posts (to install stampede body for a monster truck look!)
-Tekno 1.5 degree rear bearing carriers (1.5 deg toe in )
- JC clear overtray.
-Lots of extra parts (stock mint shocks, spur gear, couple of different sized pinion gears, slipper clutch unit, extra shock screws, bearings etc etc) I have a 20tooth Robinson racing pinion on it now I think?.
-THREE Traxxas 8.4v battery and one stock charger (new , never used).
The ESC has the LVC disabled right now. You will get the Castle Link, so you can adjust the settings as you wish. It is set fairly conservative right now, and still CRAZY FAST.
I have lots of good seller feedback on RcCanada, same username as here.
$500 FIRM for everything, plus ship from Winnipeg.
Will not split. The only thing I can swap out, is two Turnigy 3S 5000mah lipos, instead of the Traxxas packs and charger.
Please don't ask to part out. It all goes at once, $500 FIRM
http://smg.photobucket.com/albums/v228/hs748/Slash/
-Traxxas blue aluminium steering knuckles and carriers.
-MIP front X-duty CVD's, at $80.00 they can take a beating!
-Tekno rear carriers ( Tekno rear axles need to use these as the wheel bearing is larger than stock).
-Tekno rear bomb proof CVD's with aforementioned rear bearing carriers.
-Revo spec slipper clutch- It needs it!, this thing has amazing torque!
-STRC Aluminium Motor mount($28.00) (dark metallic color).
-Proline racing power stroke shocks front and rear ($100.00!)
-Factory Traxxas NEW TQi receiver and radio set (yes this is the one that you can view your trucks telemetry signals via your i phone or touch), 2.4ghz as well!.-This is in new condition, as the Slash was run with a Spektrum radio.
- 4X proline sc trenchers mounted on black proline short course wheels.
-4x stock tires and wheels combos (1 weel is not usable becuase the hex blew out on the first run with the 2400kv beast)
-4X dynamite short course wheels and tires.
-4X traxxas Talon 2.8 stampede rims as well (off road duty!).
-1X set of MIP rear X duty CVD's (good condition)
-1X Tekno Front set of bomb proof cvd's
-Bad condition stock body (got creative with a hobby knife!, some may like it some may not)
-Proline stampede F-150 raptor body (painted white)
-Parma Body posts (to install stampede body for a monster truck look!)
-Tekno 1.5 degree rear bearing carriers (1.5 deg toe in )
- JC clear overtray.
-Lots of extra parts (stock mint shocks, spur gear, couple of different sized pinion gears, slipper clutch unit, extra shock screws, bearings etc etc) I have a 20tooth Robinson racing pinion on it now I think?.
-THREE Traxxas 8.4v battery and one stock charger (new , never used).
The ESC has the LVC disabled right now. You will get the Castle Link, so you can adjust the settings as you wish. It is set fairly conservative right now, and still CRAZY FAST.
I have lots of good seller feedback on RcCanada, same username as here.
$500 FIRM for everything, plus ship from Winnipeg.
Will not split. The only thing I can swap out, is two Turnigy 3S 5000mah lipos, instead of the Traxxas packs and charger.
Please don't ask to part out. It all goes at once, $500 FIRM
http://smg.photobucket.com/albums/v228/hs748/Slash/
Last edited by hs748; 06-23-2012 at 02:09 PM.