MINT B44.1 like new
06-16-2012, 09:59 AM
#1
MINT B44.1 like new
***SOLD***
Diffs are built with ceramic thrust and diff balls and are still good. I machined the outdrives to use a 'D' diff ring from a TC6. I will include 2 extra pair of those rings. Losi springs and pistons have been installed. I have a softer set of losi springs as well. Has AE front and rear alum shock tower braces and ballast weight. 2 sets of like new tires which are Gold Bar codes and pink B-K Bars with red AKA cc foams. 1 rear outdrive got chipped until I was told to shim the axle toward the center so the drive shaft won't fall out again. The is no wear at all on shafts or outdrives. There are 2pr of new outdrives included along with a pile of NIP parts. JConcepts hexes. The body is a finnisher and I have the Wwwstocker painted to match. I CNC milled a 1.5 thick front carbon fiber shock tower and glued it to the stock tower for strength. I was running the undertray but removed it for the pics. I do have the original manual also.
NIP parts
-2pr outdrives
-steering blocks
-caster blocks
-front and rear arms
-2 front shock shafts
-shock rod ends
-shock caps
-rear chassis plate
-5 packs of shock o-rings
-diff rings and bolts
-wheel spacers
-cva retaining clips
***SOLD SOLD***
Diffs are built with ceramic thrust and diff balls and are still good. I machined the outdrives to use a 'D' diff ring from a TC6. I will include 2 extra pair of those rings. Losi springs and pistons have been installed. I have a softer set of losi springs as well. Has AE front and rear alum shock tower braces and ballast weight. 2 sets of like new tires which are Gold Bar codes and pink B-K Bars with red AKA cc foams. 1 rear outdrive got chipped until I was told to shim the axle toward the center so the drive shaft won't fall out again. The is no wear at all on shafts or outdrives. There are 2pr of new outdrives included along with a pile of NIP parts. JConcepts hexes. The body is a finnisher and I have the Wwwstocker painted to match. I CNC milled a 1.5 thick front carbon fiber shock tower and glued it to the stock tower for strength. I was running the undertray but removed it for the pics. I do have the original manual also.
NIP parts
-2pr outdrives
-steering blocks
-caster blocks
-front and rear arms
-2 front shock shafts
-shock rod ends
-shock caps
-rear chassis plate
-5 packs of shock o-rings
-diff rings and bolts
-wheel spacers
-cva retaining clips
***SOLD SOLD***
Last edited by Yeti AS3; 06-18-2012 at 12:03 PM. Reason: solx
08-16-2012, 11:43 AM
#7
Tech Initiate
1
Last edited by likes; 08-16-2012 at 11:58 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
