Mini Revo - Brushless, 2.4ghz, Lipo, RTR $250
#1
Mini Revo - Brushless, 2.4ghz, Lipo, RTR $250
*****SOLD*****
Got this in trade from another member and gave it a complete overhaul. New bearings, new chassis, new everything is seems but I wanted everything to be ready to go from the beginning. Then time got in the way....
RTR Mini E-Revo
-Spektrum SR3000 rx, Spektrum TX
-BRAND NEW Hitec 85MG servo. Upgraded from the 82MG as I planned on running it on my local 1/10 scale track. Turned on once to make sure it was centered and then the car went on the shelf.
-Near new center diff. Purchased this when I first got the MERV to help with handling and replace the slipper clutch. Works nice and smoothly, without leaks!
-USED Hitec 82MG. Was worried this wouldn't hold up so now its a backup!
-2x Near new (Only 3 cycles!!!) Zippy Lipo 2s 2200mah softpacks. These were always charged and then balanced. Plenty of run time and fit perfectly in the battery compartments with the doors closed!
-Tacon 2848 2600kv motor. Perfectly suited for the MERV with the added bonus of being faster than the VXL motor.
-Hobbywing Brushless 35amp ESC. Easily programmable with any EZRun / Hobbywing field card for fine tuned adjustment over a wide range of settings.
-1 set of Dirt Hawg tires, perfect for tearing up the street or dirt or grass! Mounted on HPI wheels. ~95% life left (still has the casting marks on the tires!)
-Custom made parallel wiring harness for ludicrously long run times.
-Custom painted body with airbrushed flames
-Bunch of spare parts. It's been a while since I sorted through them all.
$250 shipped!
Will sell without the batteries for $235
Will sell as BND for $235
Trades: Would trade for a 22T roller, DSLR, Losi SCTE, Xray T1M, Xray 808, SCX10, 17.5 motor or VTA stuff.
Got this in trade from another member and gave it a complete overhaul. New bearings, new chassis, new everything is seems but I wanted everything to be ready to go from the beginning. Then time got in the way....
RTR Mini E-Revo
-Spektrum SR3000 rx, Spektrum TX
-BRAND NEW Hitec 85MG servo. Upgraded from the 82MG as I planned on running it on my local 1/10 scale track. Turned on once to make sure it was centered and then the car went on the shelf.
-Near new center diff. Purchased this when I first got the MERV to help with handling and replace the slipper clutch. Works nice and smoothly, without leaks!
-USED Hitec 82MG. Was worried this wouldn't hold up so now its a backup!
-2x Near new (Only 3 cycles!!!) Zippy Lipo 2s 2200mah softpacks. These were always charged and then balanced. Plenty of run time and fit perfectly in the battery compartments with the doors closed!
-Tacon 2848 2600kv motor. Perfectly suited for the MERV with the added bonus of being faster than the VXL motor.
-Hobbywing Brushless 35amp ESC. Easily programmable with any EZRun / Hobbywing field card for fine tuned adjustment over a wide range of settings.
-1 set of Dirt Hawg tires, perfect for tearing up the street or dirt or grass! Mounted on HPI wheels. ~95% life left (still has the casting marks on the tires!)
-Custom made parallel wiring harness for ludicrously long run times.
-Custom painted body with airbrushed flames
-Bunch of spare parts. It's been a while since I sorted through them all.
$250 shipped!
Will sell without the batteries for $235
Will sell as BND for $235
Trades: Would trade for a 22T roller, DSLR, Losi SCTE, Xray T1M, Xray 808, SCX10, 17.5 motor or VTA stuff.
Last edited by mkiiina; 03-20-2012 at 03:34 PM.