Heli, Scale, or 3D HACKER brushless motor A40-8L Outrunner
#1
Heli, Scale, or 3D HACKER brushless motor A40-8L Outrunner
Used a few times. Still VERY nice condition. These retail for $115 at most online places. $50 delivered. Firm.
FOR USE WITH: These A40 series motors are designed for 3D-Aerobatic models up to 6 pounds and Scale models up to 8.8 pounds using 3 to 6 series LiPoly batteries.
The A40-8L 8 Pole Heli is specially developed for 500/550mm Class heli’s using 6 cell Lipoly (3800-5000mAh). These very high RPM Outrunner type motors have been optimized for Helicopter use. Featuring: 8-Pole High-Temp Neo Magnets, low resistance windings, special Heli-Stator, Fan cooling, High RPM Bearings, and precision ground and hardened output shaft.
SPECS:
•Peak Watts: 1500
•kV(RPM/V):1300
•Diameter: 1.64 in
•Length: 2.01in
•Weight:9.71 oz
•Shaft Diameter: 5.00mm
•Shaft Diameter W/ GB 6.00mm
•Idle Current: 2.50
•Operating Current: 45A
•Peak Current:55A
•Resistance: 0.0140ohms
•Poles: 8
•Orientation: Out
FOR USE WITH: These A40 series motors are designed for 3D-Aerobatic models up to 6 pounds and Scale models up to 8.8 pounds using 3 to 6 series LiPoly batteries.
The A40-8L 8 Pole Heli is specially developed for 500/550mm Class heli’s using 6 cell Lipoly (3800-5000mAh). These very high RPM Outrunner type motors have been optimized for Helicopter use. Featuring: 8-Pole High-Temp Neo Magnets, low resistance windings, special Heli-Stator, Fan cooling, High RPM Bearings, and precision ground and hardened output shaft.
SPECS:
•Peak Watts: 1500
•kV(RPM/V):1300
•Diameter: 1.64 in
•Length: 2.01in
•Weight:9.71 oz
•Shaft Diameter: 5.00mm
•Shaft Diameter W/ GB 6.00mm
•Idle Current: 2.50
•Operating Current: 45A
•Peak Current:55A
•Resistance: 0.0140ohms
•Poles: 8
•Orientation: Out
Last edited by markhat250; 02-12-2012 at 12:49 PM.