Brushless Losi LST XXL, MMM, CC 1717, 6s Lipos
 

Looking to buy a new tool box for work.

Asking $800, Paypal Only.

Started life as a brand new lst2 roller.

Everything was purchased new this past winter/spring.

Heres what is included.

Losi lst2 roller. Has Carbon Fiber Top and Bottom LST XXL chassis plates.

Castle Creations Mamba Monster Max V3. I beleieve I have the Programmer for it.

Castle Creations 1717 1580kv motor. It's a PIG. :nod:

HS-7950TH Ultra Torque HV Coreless Titanium Gear Servo. Has single servo mod! Works Great.
(Motor Type: Coreless
Bearing Type: Dual Ball Bearing
Speed (6.0V/7.4V): 0.15 / 0.13
Torque oz./in. (6.0V/7.4V): 403 / 486
Torque kg./cm. (6.0V/7.4V): 29.0 / 35.0
Size in Inches: 1.57 x 0.79 x 1.50
Size in Millimeters: 39.88 x 20.07 x 38.10
Weight oz.: 2.40
Weight g.: 68.04

The Dude racing motor mount and one-way hub. Very nice craftsmanship on these parts.

Foward Only transmission conversion.

Dynamite engine brace.

Rpm Arms all the way around.

Lunsford turnbuckles all the way around.

Lunsford Hinge pins all the way around.

New Era hubs and knuckles all the way around.

BAC 2.0 steering link.

Aluminum spring cups.

Sway bar kit.

RC monster lipo tray. I have two. The new one (not installed) was cut to fir the lipos.

RcMonster Pinion. I will have to check the tooth count on pinion and spur.

Delrin Spur Gear.

Two Lightning power 5000mah 45c 6s lipos. One was used about 15 times and the other is brand new in package.

Losi 17mm hexes.

White HPI 17mm Rims.

Lst2 body and blue lst xxl body.

Lipo charger.

*I can include Flysky Rx/Tx for $20.

The truck is a little dirty. I have not used the truck that much since it was built, 20 times max. I have not bashed the truck hard at all. I did bring it to a contructions site the last time a drove it this past summer and did jump it a few times (front bumper brace is broken, very common) but my definition of bashing is different then most peoples destruction. It was mainly used in front of my house in the street to impress some of my freinds. It was fun for me but I kinda got sick of having to flip the truck over every 10 seconds.:D The truck has ungodly amounts of power. I am selling because I my tool box is falling apart at work and need to replace it bad. I am also looking to build something new, maybe a 5th scale. I am sure I have missed something so please ask questions. Email me at [email protected] for a faster response. I am asking $800.

http://i1128.photobucket.com/albums/...r/100_0079.jpg

http://i1128.photobucket.com/albums/...r/100_0080.jpg

http://i1128.photobucket.com/albums/...r/100_0081.jpg

http://i1128.photobucket.com/albums/...r/100_0082.jpg

http://i1128.photobucket.com/albums/...r/100_0086.jpg

http://i1128.photobucket.com/albums/...r/100_0084.jpg

http://i1128.photobucket.com/albums/...r/100_0083.jpg

http://i1128.photobucket.com/albums/...r/100_0095.jpg

http://i1128.photobucket.com/albums/...r/100_0094.jpg

http://i1128.photobucket.com/albums/...r/100_0093.jpg

http://i1128.photobucket.com/albums/...r/100_0093.jpg

http://i1128.photobucket.com/albums/...r/100_0092.jpg

http://i1128.photobucket.com/albums/...r/100_0096.jpg

I would like the new era stuff if you want to sell separate or decide to part it out.

This truck is built right! I want one of these whenever i get the funds. GLWS :nod: Oh and get a Snap-on toolbox. Lifetime warranty and great customer service.

I will keep you posted if I decided to part out. Thanks for looking.

Thanks for the kind words. I have put alot of time, money, and effort into this truck. I do not want to sell but my drawers are falling out of my old craftsman box :lol:. Wednesday when the snap on truck should up he had a beautiful white roller. It was a very sharp box but with that comes the price tag at $9500. I might look into a used snap on box if I can sell this as a package.

I forgot to add this has the 4mm shock mod and I believe the 3mm chassis mod too. I used all Tony's screws too. Also a set of Align hex drivers will be included (1.5mm,2mm,3mm, & 4mm). As mentioned above this truck is an absolute power house. I was in shock on its maiden run. Thanks for looking.

P.S. Please check out LSTforums website if you are currently building an lst series truck. Very Helpful people and boat loads of great info. Long live the LST.

:tire::tire::tire:

Yea, if you do decide to part out lemme know how much you want for the MMonster setup.

Will do fellas. I will also sell w/o lipos and charger. Would also sell as a roller. Pm if Interested.

BL XXL
 

Nice trk man..I'm building one also....
Price on lipos shipped please

Thanks bud. I would like to sell the truck first before. If I do end up parting out I will go in order of request. Thanks for looking.

servo, ESC, charger
 

.

Pm's replied

If i only lived nearby ( read :in your country :D)
I would buy the roller, so you can sell the rest loose.
good luck with this beast!

TTT

Would you sell just the lipos?