Thunder Power 610C AC/DC Balance Charger
#1
Thunder Power 610C AC/DC Balance Charger
This has been my backup charger that I used for maybe 6 or 7 times, so it is used but near new. Charger can do pretty much everything. It also have the ability to do 10A charging if you were to purchase an external power supply that can handle it. Otherwise the most I have been able to get out of it without one is around 7A when charging a 4S LiPO.
SOLD
This thing has so many features. But here are the basics:
Specifications:
Type: AC/DC Charger, Discharger and Cycler with Built-In Balancer
Input: 100-240V AC or 11-18V DC
# Cells: 1-6S LiPo/LiIon/LiFe (A123), 1-14 cell NiCd/NiMH and 6-12V Pb (lead acid)
Peak: Adjustable delta peak values for NiCd/NiMH charging
Charge Rate: Adjustable from 0.1 to 10 amps in 0.05 increments
Output Connector: Standard/4mm banana plugs
Discharge: Adjustable current rates and voltage cutoffs for LiPo/LiIon/LiFe (A123) cells
SOLD
This thing has so many features. But here are the basics:
Specifications:
Type: AC/DC Charger, Discharger and Cycler with Built-In Balancer
Input: 100-240V AC or 11-18V DC
# Cells: 1-6S LiPo/LiIon/LiFe (A123), 1-14 cell NiCd/NiMH and 6-12V Pb (lead acid)
Peak: Adjustable delta peak values for NiCd/NiMH charging
Charge Rate: Adjustable from 0.1 to 10 amps in 0.05 increments
Output Connector: Standard/4mm banana plugs
Discharge: Adjustable current rates and voltage cutoffs for LiPo/LiIon/LiFe (A123) cells
Last edited by modhobby; 12-13-2011 at 08:37 PM.
#2
Charger
Paypal sent. Thank you...