asheck

Slash 4x4 custom . Has a Xerun 4268 2250 system, very fast, and never any heat issues, could switch to a Castle 2400 system for extra, though I honestly like this motor better in this. Flysky gt2 2.4 radio system, works surprisingly good. Front and rear Tekno shafts, aluminum shock caps, aluminum spur spacer, the things that allow it to run the big power. Will come with 3 batteries, 2 Blue lipos 5000 mah 2s that get ran in series, for a 4s, and 1 5000mah 3s. Currently all Deans installed, but can include TRX connectors, if wanted. 320 Zombie max tires, half thread.
The rear bumper has a section that is broke, does not effect performance, and hard to notice. One of the wheels had started to have hex problems, so the hex is glued in.
The Bumpers, body, tires and wheels, were used with another Slash 4x4 chassis I had. This chassis, Tekno shafts, ect, have around 20 runs. Could be converted back to full Slash easily. Never wet or abused. This motor makes similar power to the Castle 2200 that is in the ERBE, the rotors are the same size, so power is no problem. I will suggest aluminum hexes, as the power can be hard on the plastic ones.

The electronics have around the same 20 runs.

The electronics and Tekno's cost $400 new.

I'll ship for $400

This setup is a beast. Here's a little vid on 3s, http://www.youtube.com/watch?v=pVePnpNW3aI


Current pics





Datalogger of a 4s run, 51mph,



paypal only, and no trades
I have feedback on ebay under nojash