1/16 Revo VXL RTR Mint + Lipos + Hopups and Extras
#1
1/16 Revo VXL RTR Mint + Lipos + Hopups and Extras
I bought this recently, I used it about 8-10 times. Previous person I bought it from ran it on road only and barely used it. I used it on dirt about 2 times. This truck is pretty much mint, I'm just not into 1/16 scale. Runs great, never overheated or thermaled. Body is in great shape, no cracks just your normal scratches here and there, wings in great shape as well and has extras+hop-ups that are listed below. I am asking for $230 FIRM shipped from Canada insured, Pay Pal only. NO Trades. I might consider a trade towards a ERBE Roller/ERBE RTR/Stampede VXL RTR. I will NOT PART OUT, it all goes together or I rather keep it than split it all up.
Comes RTR with TRX 2.4ghz Remote.
- RPM arms all around.
- GPM Center Shaft(front), Rear Center Shaft is stock.
- NIP(opened) and never installed or ran are Traxxas CVD's (7151x).
- All stock arms and front stock center shaft
- 2 1300mah Zippy 3's Lipos charge/balance to 12.6v
- 2 series 1 power cells (1 run on both)
- 2 pinions that came with the truck
- differential ring and pinion gears (NIP) (tra7079)
- TRX parallel adapter (longer run times)
- Stock Wheels/Tires (80% tread)
- Losi Mini LST Tires mounted on Stock Rims (New, but never ran, these are tires you see installed in pics)
- Integy Center shafts (front is fine, rear you'll need to get another pin, it popped out)
- GPM Center shaft (Rear needs a pin as well, pin popped out, front is installed)
- Integy Heatsink/Fan
- Manual
I have feedback here, on Traxxas Forums (same username) and as well on Ebay (Stephan81111). And now for some pics.
Comes RTR with TRX 2.4ghz Remote.
- RPM arms all around.
- GPM Center Shaft(front), Rear Center Shaft is stock.
- NIP(opened) and never installed or ran are Traxxas CVD's (7151x).
- All stock arms and front stock center shaft
- 2 1300mah Zippy 3's Lipos charge/balance to 12.6v
- 2 series 1 power cells (1 run on both)
- 2 pinions that came with the truck
- differential ring and pinion gears (NIP) (tra7079)
- TRX parallel adapter (longer run times)
- Stock Wheels/Tires (80% tread)
- Losi Mini LST Tires mounted on Stock Rims (New, but never ran, these are tires you see installed in pics)
- Integy Center shafts (front is fine, rear you'll need to get another pin, it popped out)
- GPM Center shaft (Rear needs a pin as well, pin popped out, front is installed)
- Integy Heatsink/Fan
- Manual
I have feedback here, on Traxxas Forums (same username) and as well on Ebay (Stephan81111). And now for some pics.
Last edited by Stephan81; 08-12-2011 at 11:06 AM. Reason: changed price