Team Check Point DC Charger/Discharger
06-03-2011, 01:25 PM
#1
Team Check Point DC Charger/Discharger
Hello I have 2 Charger that are 8 months old and I no longer use them. I'm asking 38.00 each. If you buy both I will combine shipping on them. I will only charge you actual shipping VIA USPS with signature required. Paypal only GTempleton. Ebay feed back Gtempleton. Thank you for looking. George
This is the Team Checkpoint DC Computerized Pro Battery
Charger, Discharger with Motor Break-In Function.
FEATURES: Charges 1-10 cell NiCd and NiMH cells (1.2-12.0V) and
1-4 LiPo or Li-Ion cells (3.6-14.8V)
Five charge methods: Linear, Reflex, Pulse, 3-step and 4-step with a
top-off function that fully charges NiMHs without over heating
0.1-10.0A Linear Discharge Current and custom pulsed 20A and 30A
Discharge currents for top level pack conditioning, Dead-Short
mode for careful deep discharging
0-25mV peak sensitivity for NiCd and NiMHs including 1mV and 2mV
options
Thermal cutoff (requires optional Pro Temperature Sensor, TCPP9101)
Three motor break-in modes; single step, four step and motor test
mode, voltage adjustable from 1.0-8.0V timer adjustable from
1-180 minutes, can also be used for comm lathes and tire warmers
Blue LCD backlight for easy viewing in almost any light condition
Two cooling fans
Five year limited warranty
INCLUDES: Team Checkpoint Computerized Pro Battery Charger and Discharger with
two charge adapters-alligator clips and Deans Ultra Male plug, two
alligator clips and instruction manual
REQUIRES: 12V DC power from a Power Supply, automotive battery, or
Hobbico 12V Power Supply (HCAP0250) or
Rivergate 15A DC Bulldog Power Supply (RHCP2015)
To achieve absolute maximum output power capabilities the
DC power source must be capable of delivering at least 15A while
maintaining 12V DC (although 12.5A is enough for most functions).
SPECS: Dimensions: 5.5 x 1.8 x 5.9" (140 x 46 x 150mm)
Weight: 24.5oz (695g)
Input Voltage: 11-15V DC
Battery Types: 1-10 cell NiCd and NiMH cells (1.2-12.0V) and
1-4 LiPo or Li-Ion cells (3.6-14.8V)
Fast Charge Current: 0.1-10.0A
Fast Charge Methods: Linear, Reflex, Pulse, 3-step and 4-step
Fast Charge Termination: Peak Detection for NiCd and NiMH,
Constant Current/Constant Voltage (CC/CV) for LiPo/Ion
Peak Sensitivity: 0-25mV adjustable (including 1mV, 2mV)
Trickle Charge Current: 0-500mA (NiCd/NiMH only)
Top-off Charge: 0-1000mA (NiMH only)
Max Discharge Power: 90 watts
Discharge Current: 0.1-10.0A Linear Discharge Current
Custom pulsed 20A and 30A w/dead short mode
Discharge Cutoff Voltage: 0.1-1.1V per cell (NiCd and NiMH)
2.5-3.7V per cell (LiPo/Ion)
Temperature Cut-off Range: 50-132°F (10-55°C)
Cycle Count: 1-10 cycles (NiCd/NiMH only)
Battery Memories: 10
Display Type: 8x21 graphing LCD w/Blue backlight
Motor Break-In: Single step, four step and motor test, voltage
adjustable from 1.0-8.0V, timer adjustable from 1-180 minutes
maintains 20A @ 1.5V
This is the Team Checkpoint DC Computerized Pro Battery
Charger, Discharger with Motor Break-In Function.
FEATURES: Charges 1-10 cell NiCd and NiMH cells (1.2-12.0V) and
1-4 LiPo or Li-Ion cells (3.6-14.8V)
Five charge methods: Linear, Reflex, Pulse, 3-step and 4-step with a
top-off function that fully charges NiMHs without over heating
0.1-10.0A Linear Discharge Current and custom pulsed 20A and 30A
Discharge currents for top level pack conditioning, Dead-Short
mode for careful deep discharging
0-25mV peak sensitivity for NiCd and NiMHs including 1mV and 2mV
options
Thermal cutoff (requires optional Pro Temperature Sensor, TCPP9101)
Three motor break-in modes; single step, four step and motor test
mode, voltage adjustable from 1.0-8.0V timer adjustable from
1-180 minutes, can also be used for comm lathes and tire warmers
Blue LCD backlight for easy viewing in almost any light condition
Two cooling fans
Five year limited warranty
INCLUDES: Team Checkpoint Computerized Pro Battery Charger and Discharger with
two charge adapters-alligator clips and Deans Ultra Male plug, two
alligator clips and instruction manual
REQUIRES: 12V DC power from a Power Supply, automotive battery, or
Hobbico 12V Power Supply (HCAP0250) or
Rivergate 15A DC Bulldog Power Supply (RHCP2015)
To achieve absolute maximum output power capabilities the
DC power source must be capable of delivering at least 15A while
maintaining 12V DC (although 12.5A is enough for most functions).
SPECS: Dimensions: 5.5 x 1.8 x 5.9" (140 x 46 x 150mm)
Weight: 24.5oz (695g)
Input Voltage: 11-15V DC
Battery Types: 1-10 cell NiCd and NiMH cells (1.2-12.0V) and
1-4 LiPo or Li-Ion cells (3.6-14.8V)
Fast Charge Current: 0.1-10.0A
Fast Charge Methods: Linear, Reflex, Pulse, 3-step and 4-step
Fast Charge Termination: Peak Detection for NiCd and NiMH,
Constant Current/Constant Voltage (CC/CV) for LiPo/Ion
Peak Sensitivity: 0-25mV adjustable (including 1mV, 2mV)
Trickle Charge Current: 0-500mA (NiCd/NiMH only)
Top-off Charge: 0-1000mA (NiMH only)
Max Discharge Power: 90 watts
Discharge Current: 0.1-10.0A Linear Discharge Current
Custom pulsed 20A and 30A w/dead short mode
Discharge Cutoff Voltage: 0.1-1.1V per cell (NiCd and NiMH)
2.5-3.7V per cell (LiPo/Ion)
Temperature Cut-off Range: 50-132°F (10-55°C)
Cycle Count: 1-10 cycles (NiCd/NiMH only)
Battery Memories: 10
Display Type: 8x21 graphing LCD w/Blue backlight
Motor Break-In: Single step, four step and motor test, voltage
adjustable from 1.0-8.0V, timer adjustable from 1-180 minutes
maintains 20A @ 1.5V
Last edited by GTempleton; 06-03-2011 at 01:31 PM. Reason: spelling fixed
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
