WTT: HCR Ti Losi LST2 w/ Picco .28 & Losi Ten-T (hopped up) w/ DX3S for BL E-Revo
As the title suggests I am looking to trade a couple of nitro's for a nice brushless E-Revo.
Truck #1 - Losi LST2 Picco .28 Turbo Motor (1-3/4gal. OD 30% Speed Blend on it, LIKE NEW!!!!) Jammin' JP-3 Exhaust HCR Titanium Top Plate HCR Titanium Bulkhead Braces HCR Titanium Pin Retainers Losi HD Hard Ano Center Skid Losi HD Hard Ano Front Skid Losi HD Hard Ano Rear Skid New Era Roll Bar RPM A-Arms Lunsford Titanium Turnbuckles, Links & Pins New Era Aluminum Knuckles New Era Aluminum Carrier Hubs Losi 20mm Aluminum Wheel Hexes Aluminum Shock Caps Aluminum Shock Bodies TiNi Shock Shafts RC Raven Dual Rate Springs Aluminum Diff Housings Losi HD Diff Cups TiNi Ring & Pinion - Front Bad Ass Creations Steering Link Dynamite Aluminum Engine Brace M2C Racing Adjustable Engine Mount Ofna 3 Shoe Clutch FOC Transmission w/ Hi-Speed Only (Low gears removed) Futaba MG Steering Servos w/ AE HD Servo Savers(2) Boca Bearings Set (Complete Truck) High Capacity Fuel Tank Big Daddy Stone Element Fuel Filter MotorSaver Air Filter (NOT PICTURED!) Losi 20mm Force Wheels & ATX Tires (Stock wheel/tire combo from the LST XXL) Losi 20mm Dish Wheels & ATX Tires (Stock LST2 combo) Losi 20mm Truggy Dish Wheels & Crimefighter Tires Lots of spare parts and screws! http://kreiphotography.smugmug.com/H.../IMG0152-M.jpg http://kreiphotography.smugmug.com/H.../IMG0153-M.jpg Quick walk-around of truck during conrod break-in of Picco:
Truck #2 - Losi Ten-T Alum. chassis braces Alum. rear c-hubs M2C 3 shoe clutch Stiff springs (gold) Alum. shock standoffs Viscous diffs w/ "Chrispins" (HD diff pins) High capacity fuel tank Rear skid plates Hitec HV MG steering servo Spare set of stock wheels/tires Spare parts http://kreiphotography.smugmug.com/H...08_dLmk7-M.jpg http://kreiphotography.smugmug.com/H...76_NYYHR-M.jpg WILL INCLUDE MY SPEKTRUM DX3S WITH THE RIGHT TRADE OFFER! I'm looking for a RTR Brushless E-Revo preferably with some spare batteries (LiPo's would be nice :)) and a nice AC/DC balancing charger. I'd also entertain a trade for a Baja 5SC SS or Baja 5T. Possibly a Savage Flux HP as well that's been hooked up with all the bashin' goodies. Open to all suggestions however, must be brushless, must be RTR and include support items (batteries + charger). |
Youre crazy man, both of those Trucks are way nicer then an E-Revo. What about a brushless conversion on the lst2? I Had an e-revo, sold it to get a converted lst2 and couldnt be happier. The LST@ is alot tougher and more refined. Plus your truck already has sick upgrades on it, its a perfect candidate :nod:
Sorry if i polluted your fs thread. |
Trust me I've looked at e-converting the LST for a long time. I just don't have the time or the money to do it.
I find myself RC'ing less and less with the nitro's as they require more maintenance and the cost of fuel + plugs CONSTANTLY.... a gallon a week adds up pretty quick, lol. I hear what you're saying though. And for me to actually trade these two trucks for an E-Revo it would have to be hooked up, nice as well, and come with LiPo's and a nice ass charger. :) |
I hear ya. If you end up wanting to sell some of the goodies off your lst2 let me know. I would be interested in the Aluminum parts and the Shocks, which i would send you the stock replacements so yours is still complete.
|
10-4 I'll keep that in mind, thanks Kylar.
I'd also entertain trade offers for a Baja 5SC SS or 5T as well as a hooked up Savage Flux HP. May even consider a trade for a brushless E-Maxx that's completely full-tilt. |
Bump.
|
:tire::tire::tire:
|
PM's replied and BUMP!
:tire::tire: |
All times are GMT -7. It is currently 05:18 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.