Tamiya TB-03, Airtronics M11 radio, tools, savox servo, ride f103 tires mounted
02-09-2011, 10:36 AM
#1
Tamiya TB-03, Airtronics M11 radio, tools, savox servo, ride f103 tires mounted
Prices include shipping to the lower 48 states, but you pay the paypal fees (add 3% to the total of the items you want). I will ship asap via USPS!
tb-03: SOLD
m11 w receiver: SOLD
Savox 1251: SOLD
ride f103 tires/wheels:SOLD
Heat sink/fan: $6
Tools: SOLD
Tamiya TB-03 (almost an "R")SOLD.
Car has a bunch of upgrades, aluminum driveshaft, front diff cups, clamp hubs, tuned spring set, titanium screws, steering set, servo mounts, front and rear CVD's. The front CVDs are steel 46mm with TOP shafts. The rear are 44mm aluminum with Tamiya shafts. Front ball diff is locked using traxxas slipper pegs, but can be rebuilt with balls if you prefer.
A bunch of money was thrown at this car to get it close to the "R" version! This would be a GREAT VTA car. Some spares included, Ill include the plastic divider box they are stored in too.
Airtronics M11 w receiver. $SOLD.
This radio is WELL used. I bought it from a local racer who had it calibrated before he sold it to me. The case has some cracks and the plastic mount that holds the module is loose, so the module is held in with tape. It doesnt look pretty, but it works flawlessly.
Airtronics sells the case/plastic parts separately, so if you want to replace them you can. Included receiver has the antenna clipped off, so its range is probably reduced. That being said, I used it at an indoor track and it worked perfectly.
Savox 1251MG low profile servo: SOLD
This is an awesome servo for a really great price. Savox makes nice stuff. One of the ears is trimmed to fit into the TB-03 (shaft drive). Total use of this servo is only around 10-15 runs, maybe 1.5 hours of drive time total. Very new.
Ride f103 "a" compound tires, mounted, for tamiya f103: SOLD:
I tried these tires on my f103 and decided that f1 probably isnt my thing. The tires only have about 5 runs on them, barely broken in yet. However, one of the front wheels has a crack, as shown in the pics. Its easily fixed with superglue, but Ill let you do that.
3racing heat sink+fan: $6 shipped
Works fine, only has about 1.5 hours on it.
Tools: SOLD
Integy blue "spring steel" type hex drivers. The handles are very close to Tamiya blue, which is why I bought them! The yellow one is the standard integy replacement tip, its a 2mm because the set didnt have a 2mm included. Nut driver is 7mm, duratrax I think. Lightly used.
tb-03: SOLD
m11 w receiver: SOLD
Savox 1251: SOLD
ride f103 tires/wheels:SOLD
Heat sink/fan: $6
Tools: SOLD
Tamiya TB-03 (almost an "R")SOLD.
Car has a bunch of upgrades, aluminum driveshaft, front diff cups, clamp hubs, tuned spring set, titanium screws, steering set, servo mounts, front and rear CVD's. The front CVDs are steel 46mm with TOP shafts. The rear are 44mm aluminum with Tamiya shafts. Front ball diff is locked using traxxas slipper pegs, but can be rebuilt with balls if you prefer.
A bunch of money was thrown at this car to get it close to the "R" version! This would be a GREAT VTA car. Some spares included, Ill include the plastic divider box they are stored in too.
Airtronics M11 w receiver. $SOLD.
This radio is WELL used. I bought it from a local racer who had it calibrated before he sold it to me. The case has some cracks and the plastic mount that holds the module is loose, so the module is held in with tape. It doesnt look pretty, but it works flawlessly.
Airtronics sells the case/plastic parts separately, so if you want to replace them you can. Included receiver has the antenna clipped off, so its range is probably reduced. That being said, I used it at an indoor track and it worked perfectly.
Savox 1251MG low profile servo: SOLD
This is an awesome servo for a really great price. Savox makes nice stuff. One of the ears is trimmed to fit into the TB-03 (shaft drive). Total use of this servo is only around 10-15 runs, maybe 1.5 hours of drive time total. Very new.
Ride f103 "a" compound tires, mounted, for tamiya f103: SOLD:
I tried these tires on my f103 and decided that f1 probably isnt my thing. The tires only have about 5 runs on them, barely broken in yet. However, one of the front wheels has a crack, as shown in the pics. Its easily fixed with superglue, but Ill let you do that.
3racing heat sink+fan: $6 shipped
Works fine, only has about 1.5 hours on it.
Tools: SOLD
Integy blue "spring steel" type hex drivers. The handles are very close to Tamiya blue, which is why I bought them! The yellow one is the standard integy replacement tip, its a 2mm because the set didnt have a 2mm included. Nut driver is 7mm, duratrax I think. Lightly used.
Last edited by PaintVagrant; 02-27-2011 at 07:31 AM.
02-10-2011, 07:11 AM
#4
Tires sold, deals pending on the car and the servo. if they fall through Ill get to whomever else was interested 
02-12-2011, 09:00 AM
#5
Servo buyer backed out, PM-ed you rorzzz.
02-12-2011, 11:52 AM
#7
Servo is sold.
02-15-2011, 08:26 AM
#8
Radio, tools, and heatsink still available. Feel free to make offers
02-19-2011, 06:31 PM
#9
02-24-2011, 07:09 AM
#10
$85 or best offer for the radio!
02-24-2011, 10:43 AM
#11
Radio sold!
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
