*Feeler* Slash 4x4 roller F/S with lots of extras
#1
*Feeler* Slash 4x4 roller F/S with lots of extras
Thinking about unloading my 4x4 in anticipation of the Losi, heres what I have
Velineon motor, has 6.5mm bullets soldered on it, was used on a MMM esc
Traxxas 2070 servo (same as 2075, only black, and not waterproof)
Avid Bearings
RPM Arms front and rear
RPM body mount (front)
RPM front and rear bumpers
Hardened steel imput shaft on front drive
Driveshaft was replaced about 4 months ago
dyed black chassis
slipper clutch
3 center diffs
2 diff rebuild kits
chassis mod'd for velcro battery straps
stock battery hold down
Rustler receiver box (relocates rec to the front of the chassis)
stock receiver box
TRX Motor plate, as well as stock motor plate
rear motor mount machined to accept larger bearing
stock rear motor mount
Sway Bar kit with hard and soft bars
extra front diff case
Losi Ten-T Shocks with medium springs
Extra stock hardware (various nuts and bolts)
stock tool set
Owners manual
1 set (4)of Proline Calibers mounted on JC 2wd Slash front wheels about 75% tread
I set of JC Subcultures mounted on Black Rulux 4x4 Wheels, about 60% tread
2 JC Subcultures mounted on black Rulux wheels, about 25% tread
1 set of JC Tense wheels, black with open and closed center caps
1 set of Proline Split 6 wheels, black
1 set of Proline Beadlocks with red beadlock ring
1Set of JC Black Rulux wheels with AKA Wishbones, about 5% tread on these, they have been strapped to prevent balooning. I use these for street testing/tuning
JC Manta body, painted like Ken Blocks truck from Dirt2 video game, body is about a 5 out of 10, some Shoe Goo and drywall mesh and it would hold up for a while longer
Probably forgetting some small things, but thats the majority of it.
Other than the motor and servo, no other electrics included
Thinking $350.00 plus shipping in CONUS only,
am I in the ballpark range for all this?
Will consider trade for an 8th scale electric buggy roller, no nitro!
Truck has only been a racer, bought it new in March of last year.
I will include anything else I find that is related to this truck, as I wont have any use for it anymore.
Truck is torn down from last nites race right now, otherwise i'd post current pics, but you get the idea
Questions? email DoogieLee186@hotmail com
Will post more pics when truck is cleaned and reassembled
Velineon motor, has 6.5mm bullets soldered on it, was used on a MMM esc
Traxxas 2070 servo (same as 2075, only black, and not waterproof)
Avid Bearings
RPM Arms front and rear
RPM body mount (front)
RPM front and rear bumpers
Hardened steel imput shaft on front drive
Driveshaft was replaced about 4 months ago
dyed black chassis
slipper clutch
3 center diffs
2 diff rebuild kits
chassis mod'd for velcro battery straps
stock battery hold down
Rustler receiver box (relocates rec to the front of the chassis)
stock receiver box
TRX Motor plate, as well as stock motor plate
rear motor mount machined to accept larger bearing
stock rear motor mount
Sway Bar kit with hard and soft bars
extra front diff case
Losi Ten-T Shocks with medium springs
Extra stock hardware (various nuts and bolts)
stock tool set
Owners manual
1 set (4)of Proline Calibers mounted on JC 2wd Slash front wheels about 75% tread
I set of JC Subcultures mounted on Black Rulux 4x4 Wheels, about 60% tread
2 JC Subcultures mounted on black Rulux wheels, about 25% tread
1 set of JC Tense wheels, black with open and closed center caps
1 set of Proline Split 6 wheels, black
1 set of Proline Beadlocks with red beadlock ring
1Set of JC Black Rulux wheels with AKA Wishbones, about 5% tread on these, they have been strapped to prevent balooning. I use these for street testing/tuning
JC Manta body, painted like Ken Blocks truck from Dirt2 video game, body is about a 5 out of 10, some Shoe Goo and drywall mesh and it would hold up for a while longer
Probably forgetting some small things, but thats the majority of it.
Other than the motor and servo, no other electrics included
Thinking $350.00 plus shipping in CONUS only,
am I in the ballpark range for all this?
Will consider trade for an 8th scale electric buggy roller, no nitro!
Truck has only been a racer, bought it new in March of last year.
I will include anything else I find that is related to this truck, as I wont have any use for it anymore.
Truck is torn down from last nites race right now, otherwise i'd post current pics, but you get the idea
Questions? email DoogieLee186@hotmail com
Will post more pics when truck is cleaned and reassembled
Last edited by DoogieLee; 02-06-2011 at 04:33 PM.