Hitec 7940TH
#1
Hitec 7940TH
Sold to mr zdsh13 of RCUniverse
Thanks
rctech
Hitec 7940TH
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-7.4 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
perating Speed (4.8V): 0.08 sec/60° at no load
Operating Speed (6.0V): 0.07 sec/60° at no load
Operating Speed (7.4V): 0.06 sec/60° at no load
Stall Torque (4.8V): 144.8oz/in. (11kg.cm)
Stall Torque (6.0V): 180.5oz/in. (13kg.cm)
Stall Torque (7.4V): 222oz/in. (16kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Titanium Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.79"x 1.50" (40 x 20 x 38mm)
Weight: 2.40oz (68g)
condition: New
Why Selling:
Willing to Trade: No
RFS no Need anymore
The Following servo are all Brandnew
Hitec 7940TH 12pcs - 2 = 10 pcs avail 80.00 each 800.00USD buy all free shipping usa and canada
ACCEPTED PAYPAL PAYMENT
Western Union
Thanks
rctech
Hitec 7940TH
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-7.4 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
perating Speed (4.8V): 0.08 sec/60° at no load
Operating Speed (6.0V): 0.07 sec/60° at no load
Operating Speed (7.4V): 0.06 sec/60° at no load
Stall Torque (4.8V): 144.8oz/in. (11kg.cm)
Stall Torque (6.0V): 180.5oz/in. (13kg.cm)
Stall Torque (7.4V): 222oz/in. (16kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Titanium Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.79"x 1.50" (40 x 20 x 38mm)
Weight: 2.40oz (68g)
condition: New
Why Selling:
Willing to Trade: No
RFS no Need anymore
The Following servo are all Brandnew
Hitec 7940TH 12pcs - 2 = 10 pcs avail 80.00 each 800.00USD buy all free shipping usa and canada
ACCEPTED PAYPAL PAYMENT
Western Union
Last edited by westproof; 01-22-2011 at 08:38 PM.
#3
If your willing to split I would take one for sure maybe 2
#4
Dam thats a lot of servos
#5
yes im willing to sell separately but you pay the shipping
thanks
thanks
#7
I'll take two
PM sent.
#8
PM sent...
#10
_
#11
Price for 1 shipped to newcastle, Ok?
#13
PRICE OF SHIPPING USA ONLY
SHIPPING BY FEDEX MUCH CHEAPER
1 pc servo = 105.00 USD with shipping
2 pcs servo = 185.00 usd with shipping
3 pcs servo = 265.00 usd with shipping
4 pcs servo = 345.00 usd with shipping
This list is for 1 to 4 pcs servo
BUY all 10 pcs of the servo is 800.00USD free shipping
1 pc servo = 105.00 USD with shipping
2 pcs servo = 185.00 usd with shipping
3 pcs servo = 265.00 usd with shipping
4 pcs servo = 345.00 usd with shipping
This list is for 1 to 4 pcs servo
BUY all 10 pcs of the servo is 800.00USD free shipping
Last edited by westproof; 01-20-2011 at 01:26 PM.
#14
Sold to mr zdsh13 of RCUniverse
Thanks
rctech
Hitec 7940TH
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-7.4 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
perating Speed (4.8V): 0.08 sec/60° at no load
Operating Speed (6.0V): 0.07 sec/60° at no load
Operating Speed (7.4V): 0.06 sec/60° at no load
Stall Torque (4.8V): 144.8oz/in. (11kg.cm)
Stall Torque (6.0V): 180.5oz/in. (13kg.cm)
Stall Torque (7.4V): 222oz/in. (16kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Titanium Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.79"x 1.50" (40 x 20 x 38mm)
Weight: 2.40oz (68g)
condition: New
Why Selling:
Willing to Trade: No
RFS no Need anymore
The Following servo are all Brandnew
Hitec 7940TH 12pcs - 2 = 10 pcs avail 80.00 each 800.00USD buy all free shipping usa and canada
ACCEPTED PAYPAL PAYMENT
Western Union
Thanks
rctech
Hitec 7940TH
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-7.4 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
perating Speed (4.8V): 0.08 sec/60° at no load
Operating Speed (6.0V): 0.07 sec/60° at no load
Operating Speed (7.4V): 0.06 sec/60° at no load
Stall Torque (4.8V): 144.8oz/in. (11kg.cm)
Stall Torque (6.0V): 180.5oz/in. (13kg.cm)
Stall Torque (7.4V): 222oz/in. (16kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: Titanium Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.79"x 1.50" (40 x 20 x 38mm)
Weight: 2.40oz (68g)
condition: New
Why Selling:
Willing to Trade: No
RFS no Need anymore
The Following servo are all Brandnew
Hitec 7940TH 12pcs - 2 = 10 pcs avail 80.00 each 800.00USD buy all free shipping usa and canada
ACCEPTED PAYPAL PAYMENT
Western Union