Go Back  R/C Tech Forums > For Sale/Trade Forums > R/C Items: For Sale/Trade
TC3 GR8 setup MUST see (PICS) >

TC3 GR8 setup MUST see (PICS)

TC3 GR8 setup MUST see (PICS)

Old 07-25-2004, 09:34 PM
  #1  
Tech Initiate
Thread Starter
iTrader: (1)
 
Join Date: Jan 2004
Posts: 33
Trader Rating: 1 (100%+)
Default TC3 GR8 setup MUST see (PICS)

This is an Associated electric TC3 4 wheel drive 1:10 scale radio control touring car:



















This car is READY TO RUN minus transmitter & receiver, and is everything BUT stock.

* THE RECEIVER SHOWN IS NOT, I REPEAT NOT INCLUDED

DESCRIPTION and HISTORY:

I have had this car since last january, it was bought used, and by now is completely changed. The car is
setup for stock electric carpet or parking lot racing, and has done very well for me. I am moving on to
things that I RIDE ON, so I'm selling almost all of my rc stuff.

Every part of the car has been maintained and upgraded from racing racing - bearings, diffs, shocks,
suspension, motors, everything has been well taken care of. The chassis has been upgraded to a carbon fiber
aftermarket one which retails for 199 alone. All connections have been soldered using deans solder. There is a
lot of attention to detail in this car and I have made custom improvements to some aspects of the car, I am a
mechanical engineer and to be honest can't stop modding stuff until it's just how I want it, if there is a problem
which is going to affect my racing I corrected it the best way possible with no expense spared, well mabey a
little I'm not NASA.

I am NOT PARTING OUT this stuff, it must be sold as a unit, sorry. This would be great for anyone looking to get
into 1/10 touring all you have to do is add a transmitter and receiver and you're all set. My jr r1 radio and
receivers are NOT included.

CHASSIS:

- "Xtreme" Carbon Fiber chassis in blue http://www.xtremercracing.com/TC3_Ca...iber_Parts.cfm
- Factory Team threaded blue aluminum shocks and aluminum caps w/ trinity o-rings
- teflon sealed bearings thruought (none sticking all spin like new)
- Factory Team Bearing Spacers
- Factory Team Aluminum steering knuckles
- nitro steering rack assembly
- 2 degree castor blocks installed I think they're 2 degee in there, mabey 0 degree
- lightweight plastic diffs (newly assembled less than 5 runs ago)
- blue titanium adjustment links with rpm ball cups (very tough - show no wear)
- rpm extended front bumper
- front bumper and post upper support (forgot who made it)
- brp extended rear bumper
- brp side wings (flattened and cut a little bit)
- custom motor heat sink with small fan attached for cooling the motor (plugs into the BATT spot on receiver)

SPEED CONTROLS:

- 1 LRP IPC S.R. esc (very nice no motor limit, 6000uf capacitor installed)
- 1 novak rooster reversable esc (my backup)

MOTORS:

(a few have schottky (sp) diodes installed)

- 2 "revenge of the monster" Monster stock Pro 27 turn motors (one not shown, it'll be there)
- 1 reedy rage stock pro 27 turn motor
- 1 p2k2 stock Pro 27 turn motor

TIRES:

4 sets of foams: (28mm unless specified)
- Jaco pink/pink (pr) pink/pink (pr) (very good cond. - uncut and barely warn)
- Jaco purp/purp (pr) org/red (pr) (very good cond. - uncut and barely warn)
- Ellegi 26mm,42 shore (pr) & 30mm,40 shore (pr) (used cond. - trued thin and warn)
- TRC pink 30 shore (pr) 30 shore (pr) (used cond.)

1 set of rubbers:
- Pro-Line Rage tires on chrome spoke wheels (very good cond. - no wear)

BODIES: Various Beat-up-ness But hey they're bodies. Some are in pretty good shape

- 2 bmw m3's (Protoform 180mm)
- 1 mazda 6 (Protoform 180mm)
- 1 rx7 (190mm - from a nitro car but it fits nicely)
- 1 eclipse (Pro-Line 180mm)

SERVO:

-HiTech 5625 M.G. digital servo

BATTERIES:

- 1 pro-match racing GP3300 matched pack 6 cell SxS (1.160+) (warn I use it for practice)
- 2 ballistic batteries GP3300 matched packs 6 cell SxS (1.16+) (very good condition)
- battery storage case

SPARE PARTS: All new or good condition unless otherwise stated

- about 9 sets of springs (Factory Team) of various stiffness
- 2 complete steel diff assemblies (used but undamaged)
- 1 plastic outdrive (diff part) plastic long side (new)
- complete brp hardened hinge pin set (8 pins) (new)
- 11 additional misc pins (all straight)
- 3 rear suspension arms (new)
- 4 factory arm mounts (some new, some used but undamaged)
- 1 sock bumper (used)
- 1 rpm extended bumper (new)
- 3 drive axles (new)
- extra shock rebuild hardware
- Factory Team Heat sink
- 4 stock chassis braces
- 4 Factory Team Graphite Hex adaptors (NIP)
- 2 body posts (used, still very usable)
- 4 plastic shock caps (used, still just like new)
- misc ball cups
- motor "cam" and small drive pieces
- 2 front suspension arms (new)
- 1 front shock tower (new)
- 1 electric steering rack assembly (used, works fine)
- 1 rear bumper (used, fine shape)
- 4 2degree block carriers (2 pr)
- 1 0degree block carrier
- 22, 24, 25, 26, 27, & 28 pinion gears
- 2 sway bar assemblies Factory Team complete
- 1 extra plastic tub chassis
- manual is around here somewhere
- spare parts storage case
I have tried to be as thurough as possible, I'm sure I left some things out
and have listed some things incorrectly as I didn't look at the part names. I will
change this as necessary and hope everyone will look at the many pictures I've taken as
proof of sale. Although I tried to explain the condition and names
accuratley, I'll make no refunds or reimbursements of any kind.

I'd like to see 350 + 20 shipping OR B/O, priced to sell quickly. To build up this car like
it is you'd need the better part of a thousand dollars.


I WILL NEGOTIATE ON PRICE SO DROP ME AN EMAIL AT [email protected]

I also have a trinity Pro Lathe 3 with MANY accessories, a nice HUDY Ultimate
setup system 1/10 touring with all accessories and custom aluminum case that you
keep your car in, available seperately.
And an INTEGY octane 2 discharge tray for cheap, works like new. And a nice RTR modded
Emaxx with 2 sets of 7-cell 3300's

I'm keeping my charging equipment and radio equipment, for now at least.


Thanks,
Randy
rdandy5875 is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.