Team Academy GV2 Pro. Former team drivers car. $180 + shipping.
11-16-2010, 09:16 PM
#1
Team Academy GV2 Pro. Former team drivers car. $180 + shipping.
Up for sale is the nicest Team Academy GV2 Pro you will ever see. I used to be a team driver for them and this was the car I built for 2010. I am running Tamiya now, so my prized GV2 must go. I built this car in January of this year. The first race that I did with it was the Midwest Champs at CRCRC. I started running my Tamiya in July so this car has literally 6 months on it. The last race I ran with the car I won, since then it has been my backup as I had no parts for the Tamiya. Here is a list of the modifications and aftermarket parts that this car has.
1. Long screws through front end to reduce flex.
2. Bellcranks and chassis dremeled for maximum steering throw.
3. Front axles and slipper setup to use 3mm locknuts instead of screws.
4. Rear Hubs machined to allow them to be move forward or back 1mm.
5. Custom rear sway bar.
6.Tamiya TiNitrided shock shafts.
7. Hot Bodies Ballcups. These are by far the best ballcups I have used in 15+ years in this hobby.
8. Hot Bodies Ballstuds. I have been running a HB D4 since Jan 2008 and haven't broke a single ballstud.
9. Lunsford Titanium Turnbuckles.
10. Lunsford Titanium Hinge Pins.
11. Lunsford Titanium Screw Kit.
12. Schumacher Ceramic balls in the diff.
13. PSI Racing 3mm motor plate, with the motor holes elongated by PSI by my request. This will allow the proper gearing of those 17.5 motors.
Here is a list of the following parts that I am incuding with the car.
The following parts are new in the package.
Front A arms x1
Front Steering Knuckle x2
Front C Hub x2
Steering Bellcranks and servo saver x1
Rear A arms x2 +1 loose arm
Rear Hubs x1 +1 machined hub +1 new unmachined hub
Rear Bulkhead and T plate x1
Wing Mounts x1
Bumper set x1
1 CVD
Diff rebuild kit x1
Motor Plate x1
Slipper rebuild kit x1
27.5 degree front bulkhead x1
The following parts are included and although they are not new they are still in good shape.
Motor plate x1
Stock turnbuckle set x1
Stock hinge pin set x1
Stock Shock shaft set x1
Black Front Springs x1
Black Rear Springs x1
Rear Bulkhead and T plate x1
Transmission case x1
27.5 degree front bulkhead x1
74T, 76T, 78T, 80T, 83T, 86T Spurs x2 (the other 78 is on the car)
Topshaft x1
And an assortment of other small parts that include things like shock ends, stock ballcups, shock seals, spacers, gears ect...
I am including a full set of JConcepts orange Bar Codes on Academy Wheels. The rear tires have Proline 2 Stage inserts in them. Also a set of Blue and a set of White front Bar Codes on Academy wheels. If you want I can acetone the tires off of the rims and you can have 3 sets of front wheels and 1 set of rear wheels ready to glue the tires of your choice on them. I will throw in the 2 Stage foams out of the rear tires too. I am not including a body with this car because I want to keep my body from this car for sentimental reasons. A new stock body can be purchased from Stormer Hobbies for like $14. They also carry all the parts for this car, but with all the parts I am including you shouldn't need to buy much.
This car is very fast and will be perfect for anyone that likes to run something different. All of the little bugs have been worked out of this car and it is a serious condender. Like I said $180 + shipping, PayPal ONLY! PM me if you have any questions.
Thanks for looking,
Ifuonlyknew
1. Long screws through front end to reduce flex.
2. Bellcranks and chassis dremeled for maximum steering throw.
3. Front axles and slipper setup to use 3mm locknuts instead of screws.
4. Rear Hubs machined to allow them to be move forward or back 1mm.
5. Custom rear sway bar.
6.Tamiya TiNitrided shock shafts.
7. Hot Bodies Ballcups. These are by far the best ballcups I have used in 15+ years in this hobby.
8. Hot Bodies Ballstuds. I have been running a HB D4 since Jan 2008 and haven't broke a single ballstud.
9. Lunsford Titanium Turnbuckles.
10. Lunsford Titanium Hinge Pins.
11. Lunsford Titanium Screw Kit.
12. Schumacher Ceramic balls in the diff.
13. PSI Racing 3mm motor plate, with the motor holes elongated by PSI by my request. This will allow the proper gearing of those 17.5 motors.
Here is a list of the following parts that I am incuding with the car.
The following parts are new in the package.
Front A arms x1
Front Steering Knuckle x2
Front C Hub x2
Steering Bellcranks and servo saver x1
Rear A arms x2 +1 loose arm
Rear Hubs x1 +1 machined hub +1 new unmachined hub
Rear Bulkhead and T plate x1
Wing Mounts x1
Bumper set x1
1 CVD
Diff rebuild kit x1
Motor Plate x1
Slipper rebuild kit x1
27.5 degree front bulkhead x1
The following parts are included and although they are not new they are still in good shape.
Motor plate x1
Stock turnbuckle set x1
Stock hinge pin set x1
Stock Shock shaft set x1
Black Front Springs x1
Black Rear Springs x1
Rear Bulkhead and T plate x1
Transmission case x1
27.5 degree front bulkhead x1
74T, 76T, 78T, 80T, 83T, 86T Spurs x2 (the other 78 is on the car)
Topshaft x1
And an assortment of other small parts that include things like shock ends, stock ballcups, shock seals, spacers, gears ect...
I am including a full set of JConcepts orange Bar Codes on Academy Wheels. The rear tires have Proline 2 Stage inserts in them. Also a set of Blue and a set of White front Bar Codes on Academy wheels. If you want I can acetone the tires off of the rims and you can have 3 sets of front wheels and 1 set of rear wheels ready to glue the tires of your choice on them. I will throw in the 2 Stage foams out of the rear tires too. I am not including a body with this car because I want to keep my body from this car for sentimental reasons. A new stock body can be purchased from Stormer Hobbies for like $14. They also carry all the parts for this car, but with all the parts I am including you shouldn't need to buy much.
This car is very fast and will be perfect for anyone that likes to run something different. All of the little bugs have been worked out of this car and it is a serious condender. Like I said $180 + shipping, PayPal ONLY! PM me if you have any questions.
Thanks for looking,
Ifuonlyknew
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
