Jammin SCRT10 Ready To Race
#1
Jammin SCRT10 Ready To Race
This is my Jammin SCRT10 Truck I built to run in the Summer Outdoor Asphalt season
We run on a road course, the same as the touring cars, so NO jumps, only Road Rails of which are all plastic.
I decided after the serious was over to not run the Mod Truck anymore, and put it on the shelf, and have not
run it since that time.
Truck is ready to race, just add your receiver and radio combo and it is ready to win.
It was run with the Standard Havoc and a Novak 4.5, until the end of which I changed to the newer
Novak Havoc SC ESC which can be adjusted with Boost and all the other goodies, of which I never messed with
and a Ballistic 4.5 motor. These BOTH only have 2 races on them, and I can say they have a LOT more power
then the standard 4.5.
I did a lot of mods to it, from the Front Slash 4x4 bumper to making the rear bumper bullet proof with all the longer
Hardware, along with anything else on the truck to make it run without fear of breakage in a race or items I did or
would break in a race..
It comes with foam tires and the stock wheels and tires. (Foam Tires have Shoe Goo on the outside to help traction
roll and to keep from chunking. Shocks have some limiters in them to make it a hair lower
but can be removed to give them a bit more travel.
I have a used JConcepts Illuzion BAJR Desert Body and a lot of other items that came with the truck for tuning it
that I will include with it, just didn't get them out when I made all the pictures, but will throw anything I can find
in with it at the time of shipping.
It has the following additions and parts in the truck.
-Novak Havoc SC ESC Speed Controller
-Novak Ballistic 4.5 Motor
-Hitec HS-7965MG Coreless Digiatal Servo, Speed: 0.10, Torque: 139 oz/in
-Aluminum Front "C" Hub carriers
-Aluminum Rear Hub Carriers
-Aluminum Shock Towers
-Aluminum Steering Knuckles
-CVDs in front and rear
-Bearings in anything that had a bronze bushing
I will pay for shipping in the Lower 48 insured by UPS for $475.00
If you have any questions, drop me a note.
NOT Looking for any trades
Many pictures can be scene at the following link.
http://www.thefishnet.com/jamminscrt10/jamminscrt10.htm
Here are a few pics
We run on a road course, the same as the touring cars, so NO jumps, only Road Rails of which are all plastic.
I decided after the serious was over to not run the Mod Truck anymore, and put it on the shelf, and have not
run it since that time.
Truck is ready to race, just add your receiver and radio combo and it is ready to win.
It was run with the Standard Havoc and a Novak 4.5, until the end of which I changed to the newer
Novak Havoc SC ESC which can be adjusted with Boost and all the other goodies, of which I never messed with
and a Ballistic 4.5 motor. These BOTH only have 2 races on them, and I can say they have a LOT more power
then the standard 4.5.
I did a lot of mods to it, from the Front Slash 4x4 bumper to making the rear bumper bullet proof with all the longer
Hardware, along with anything else on the truck to make it run without fear of breakage in a race or items I did or
would break in a race..
It comes with foam tires and the stock wheels and tires. (Foam Tires have Shoe Goo on the outside to help traction
roll and to keep from chunking. Shocks have some limiters in them to make it a hair lower
but can be removed to give them a bit more travel.
I have a used JConcepts Illuzion BAJR Desert Body and a lot of other items that came with the truck for tuning it
that I will include with it, just didn't get them out when I made all the pictures, but will throw anything I can find
in with it at the time of shipping.
It has the following additions and parts in the truck.
-Novak Havoc SC ESC Speed Controller
-Novak Ballistic 4.5 Motor
-Hitec HS-7965MG Coreless Digiatal Servo, Speed: 0.10, Torque: 139 oz/in
-Aluminum Front "C" Hub carriers
-Aluminum Rear Hub Carriers
-Aluminum Shock Towers
-Aluminum Steering Knuckles
-CVDs in front and rear
-Bearings in anything that had a bronze bushing
I will pay for shipping in the Lower 48 insured by UPS for $475.00
If you have any questions, drop me a note.
NOT Looking for any trades
Many pictures can be scene at the following link.
http://www.thefishnet.com/jamminscrt10/jamminscrt10.htm
Here are a few pics
#2
How much for the roller, no tires or electronics?
#4
Tech Regular
iTrader: (31)
Join Date: Aug 2009
Location: Culbertson & Three Forks, Montana
Posts: 361
Trader Rating: 31 (100%+)
I'll take the esc
#6
Tech Adept
iTrader: (27)
Would you consider trades for a brand new just assembled Factory Team SC10?
http://sandiego.craigslist.org/csd/tag/2055793154.html
http://sandiego.craigslist.org/csd/tag/2055793154.html