GenXL ARTR
11-10-2010, 03:24 PM
#1
GenXL ARTR
GenXL with a 17.5 Novak ballistic,Tekin Rspro(w/hot wire),Novak smart boost and Jr3650 servo,New never ran painted body,SMC 4900mah 1s in good shape no puffing .(Receiver and transponder not included)Just add your Rx and Tx charge the batt and go....
spare parts:
mumerous red bolts and nuts
extra alum servo mounts
diff balls
shock springs red,blue,silver,gold
front axles
several axle height adjusters
rear alumi side pods 1 right 1 left
top plate
bottom plate
pr side links genxl
3 pairs of upper control arms
3,4,5mm front end spacers
shims for front end
misc. side springs
misc. front springs
pr.body posts
spare turn buckles
handful of upper arm mounts
16 64p pinions
8 64p spurs
diif rings
5 sets front tires (used)
3 sets rear tires (used)
and a few other misc items not worth listing
NIP CRC parts:
#3256 2.5mm chassis
#1766 bottom plate
#3247 A-arm set upper and lower (x4)
#3377 steering arms
#3252 graphite steering arms
#3348 dual length upper arms
#3251 steering block set w/ajusters (x2)
#3243 upper arm mount set (x2)
#3250 1/12 polished king pins
#3277 pro strut graphite brace
#1297 side springs red
#3290 encore shock
#3293 encore plastic shock parts
#3295 encore rubber shock parts
#3387 side spring retainers
#40194 pivot balls
#4121 diff collar
#1371 damper tube (x2)
#3281 clamping links
#3374 center pivot
#3396 front springs (x2)
#3390 front springs (x2)
#3242 clamp screw and nut
#1378 body post
#4123 beveled spring washers
#4732 1/4" shims
#1261 Batt. retention O-ring
NIP #5600 Novak switch harness
9 NIP pinions 64p
6 NIP spurs 64p
13.5 Novak (used)
13.5 Orion (used)
All thats needed is a rear axle, bearingss, tweak plates,rear cross brace and a few screws and you can put together another roller and still have enough parts to support both cars
$525.00 shipped Cont. US only
Not breaking apart at this time ,will consider trade for losi 8 2.0E buggy artr
spare parts:
mumerous red bolts and nuts
extra alum servo mounts
diff balls
shock springs red,blue,silver,gold
front axles
several axle height adjusters
rear alumi side pods 1 right 1 left
top plate
bottom plate
pr side links genxl
3 pairs of upper control arms
3,4,5mm front end spacers
shims for front end
misc. side springs
misc. front springs
pr.body posts
spare turn buckles
handful of upper arm mounts
16 64p pinions
8 64p spurs
diif rings
5 sets front tires (used)
3 sets rear tires (used)
and a few other misc items not worth listing
NIP CRC parts:
#3256 2.5mm chassis
#1766 bottom plate
#3247 A-arm set upper and lower (x4)
#3377 steering arms
#3252 graphite steering arms
#3348 dual length upper arms
#3251 steering block set w/ajusters (x2)
#3243 upper arm mount set (x2)
#3250 1/12 polished king pins
#3277 pro strut graphite brace
#1297 side springs red
#3290 encore shock
#3293 encore plastic shock parts
#3295 encore rubber shock parts
#3387 side spring retainers
#40194 pivot balls
#4121 diff collar
#1371 damper tube (x2)
#3281 clamping links
#3374 center pivot
#3396 front springs (x2)
#3390 front springs (x2)
#3242 clamp screw and nut
#1378 body post
#4123 beveled spring washers
#4732 1/4" shims
#1261 Batt. retention O-ring
NIP #5600 Novak switch harness
9 NIP pinions 64p
6 NIP spurs 64p
13.5 Novak (used)
13.5 Orion (used)
All thats needed is a rear axle, bearingss, tweak plates,rear cross brace and a few screws and you can put together another roller and still have enough parts to support both cars
$525.00 shipped Cont. US only
Not breaking apart at this time ,will consider trade for losi 8 2.0E buggy artr
Last edited by Relic; 11-10-2010 at 03:52 PM.
11-10-2010, 03:41 PM
#2
Relic, pm sent
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
