Associated RC18 B2/T2 with Hop Ups
 

Sold

An Associated RC18 B2/T2 that is ready to run except for a radio transmitter and receiver. Please see the attached pictures. Includes the following items installed in the car:

• Tekin Mini Rage Brushless ESC with 5.5 kV Mini Brushless Motor
• JR S285MG (digital metal gear) Steering Servo
• Pro-Match 2 cell LiPo (1800 mAh)
• Associated 21404 Factory Team Ti Turnbuckle Set
• Associated 21808 Rear Ball Diff Kit
• Associated 21157 11T Pinion Gear (stock is 12T and included)

The front gearbox has been replaced with a new replacement from Associated which moves the front pulley back slightly to alleviate the tight belt problem – much less binding in the drive train. The included battery has a bad cell – included only to get one going. It should be replaced for racing as it needs care to avoid overcharging and/or over-discharging. The servo saver did not fit my chosen steering servo, but the servo is very strong and I ran without using the servo saver. The servo saver is included if you wish to run a different servo.

Also included are these hop-up or spare items NIP:

• Associated 21230 MIP CVD Axle Sets (2 Sets – enough to do both front and rear)
• Associated 21324 66T Spur Gear
• Associated 21381 Front Ball Diff Kit
• Associated 21271 Mini Pin Tires (front) mounted on White Dish Wheels.

$220 for everything.

I normally sell stuff on Ebay, but I thought RCTech would get a much larger audience. You can check my feedback (100% positive) as an Ebay seller by looking under the user name MAK581. Please PM me if interested.

PayPal with confirmed address and Lower 48 USA only.

TTT

Interested in any trades?

If anyone is interested in the car without some or all of the NIP parts, make an offer.

Sent you a PM on price for car and parts with no electronics

TTT

I would be interested in the eletronics, willing to separate?

And I'm intersted in the car and parts only.

Let's work out something amongst the three of us.