R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   R/C Items: For Sale/Trade (https://www.rctech.net/forum/r-c-items-sale-trade-16/)
-   -   Nitro Engine Sell out.. Sirio, OS, ExTech .24, Force .28 (https://www.rctech.net/forum/r-c-items-sale-trade/434758-nitro-engine-sell-out-sirio-os-extech-24-force-28-a.html)

ScottyM 09-14-2010 11:38 AM

Nitro Engine Sell out.. Sirio, OS, ExTech .24, Force .28
 
Thinning the Stable Sale!!

I also have a few pipes listed at the bottom.

$80 - Sirio EVO IV Kania STi .21. Engine is in good running condition. I have had trouble with the CB bearings wearing excessively fast. I found out the guy I bought the engine from used Kyosho bearings, which are very tight, after I switched to Kyosho bearings I had no more problems. I will include New TKO Front and Rear Ceramic bearings new but not in TKO packaging. I will also, including standard head button with standard needle for conversion, and OFNA clutch/flywheel set up with 16 tooth CB.

http://i257.photobucket.com/albums/h...e/100_0451.jpg
http://i257.photobucket.com/albums/h...e/100_0450.jpg
http://i257.photobucket.com/albums/h...e/100_0452.jpg

$80 - Sirio / Werks EVO IV Kania STi .21. Engine is a Sirio Kania, but has a werks case. Original case cracked. This engine has a fresh pinch form Ray A. Racing, and will need broke-in. Otherwise it runs and works excellent. I will include New TKO Front and Rear Ceramic bearings new but not in TKO packaging. I will also, including standard head button, with additional carburetor with standard needle installed.

http://i257.photobucket.com/albums/h...e/100_0453.jpg
http://i257.photobucket.com/albums/h...e/100_0454.jpg
http://i257.photobucket.com/albums/h...e/100_0455.jpg

$120 - Trinity / Extech .24 full mod. Engine has about 5 gallons on it, and about 1 gallon ago I had it pinched by Ray A Racing. Engine has excellent compression, and makes good low end power. Includes Answer RC clutch set up with 13 tooth CB, Clutch shoes have 1 race on them.

http://i257.photobucket.com/albums/h...e/100_0456.jpg
http://i257.photobucket.com/albums/h...e/100_0457.jpg
http://i257.photobucket.com/albums/h...e/100_0458.jpg
sold - OS .28XZ. Case, carb, bearings head button, etc all are in good condition. The pin on the crankshaft is out of round by .006”, and is tapered about the same. The Rod bushing is out of round by .005”. I haven’t needed an engine with this much power, but if I did I would replace the rod and crank, and run it. With the bushing and crank being out as much as they are it affects timing and compression making it very hard to hold a tune. With new components I truly believe this engine will run like new. I am throwing in a 7,8,9mm carb restrictors.


$35 - OFNA Force .28. New front bearing, crankshaft and rod are in good condition. Needs new piston and sleeve..

http://i257.photobucket.com/albums/h...e/100_0462.jpg
http://i257.photobucket.com/albums/h...e/100_0463.jpg
http://i257.photobucket.com/albums/h...e/100_0464.jpg

$60 - 1 brand new in opened package Pro-Line Caliber Truggy tires. I mounted them once, but never raced them.

Pics to come soon..

$45 - 1 set of soft AKA City Blocks, for truggy. I have raced these maybe 8 times. Tread is in good shape 80-85%

Pics to come soon

$45 - 1 set of soft AKA I-Beams for truggy. About 60-65% tread on tires.

Tires on truggy pictured above.

I have a lot of pipes I would sale also if anyone is interested:
$40 - 1- Extech 2057. Some dents, but nothing that will affect performance.
http://i257.photobucket.com/albums/h...e/100_0468.jpg
$35 - 1- Sirio 2013. A lot of dents, and Pipe is some what misshaped, but works great.
http://i257.photobucket.com/albums/h...e/100_0469.jpg
$50 - 1 - Jammin JP-3. 1 very slight dent and hard coating has worn off bottom.
http://i257.photobucket.com/albums/h...e/100_0467.jpg
Sold- 1 - Jammin JP-6. Pipe is nearly perfect condition with very slight dents.

$30 – 1 - eXtech Big Boy pipe, no Header, nearly new only used 1 time.
http://i257.photobucket.com/albums/h...e/100_0465.jpg

Will sell remaining for 300, total adds up to over 450.

I have this listed on HeartlandRC.com as Well as here.. First to PM with offers will have first chance at purchase.

All Prices are shipped. I will give discounts for any combined orders, pm me for quotes and offers, “NO LOW BALLING” please. I will be boxing everything for shipping Tuesday Sept.7, if there are any requests for certain pictures I did not capture I will need them before that afternoon. All Items will be shipped the afternoon after payment is received. Will ship to “CON US ONLY”!!

No Trades at this time, unless it is for Cash Money..

ScottyM 09-15-2010 12:46 PM

Daily Bump..

ScottyM 09-16-2010 12:22 PM

Bump..

PM's replied to, make reasonable offers..

I can't go any lower on pipes.

ScottyM 09-16-2010 07:35 PM

Jammin JP-6 is sold

ScottyM 09-17-2010 08:31 AM

Weekend bump.

I will be out of town all weekend, with out a PC, so all PM's will be replied to Sunday night or Monday morning..

swirlvike666 09-17-2010 11:24 AM

im extremely interested in the os 28xz, if you still have it.

ScottyM 09-19-2010 08:17 PM


Originally Posted by swirlvike666 (Post 7951944)
im extremely interested in the os 28xz, if you still have it.

PMed you about it..

Everything still available..

Sorry for taking so long to reply to pm's Was gone a Mo State Pro Series Race @ Real R/C in P-Hill.. Watched Jerod Tebo, put on a clinic un Pro Buggy.. OMG that guy has Skills.

ScottyM 09-20-2010 09:35 AM

Monday Bump!!

ScottyM 09-20-2010 06:38 PM

Deal Pending on the OS.28XZ

ScottyM 09-21-2010 08:31 AM

Everything still available..

swirlvike666 09-21-2010 07:34 PM

payment was sent on os 28xz

ScottyM 09-22-2010 12:12 AM

OS.28XZ is SOLD.

I will ship Wednesday Afternoon..

ScottyM 09-22-2010 12:21 PM

Wed afternoon bump, and deal making time.

If some one buys the 2 evo4 engines and the force .28 @ $180, I'll throw in your choice of one pipe I will also sell the Extech .24 and throw in your choice of pipe..

So that is 2 Sirio Evo4s and 1 force .28 with your choice of the remaining pipes for $180.. OR the Extech .24 with choice of remaining pipes for $120 - 2 Damn good deals..

ScottyM 09-24-2010 10:28 AM

Well the Stable of engines is thinning out.. IF anyone is seriously interested in any of what is left send me a PM, I will make one heckuva deal on the remaing 4 engines and pipes..

ScottyM 09-25-2010 11:52 PM

Last chance on these motors..

I will be listing them on E-bay. If you have any interest in them, send em a PM, or post here.

I'm willing to deal..


All times are GMT -7. It is currently 05:29 PM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.