MIcro-T Master

iTrader: (27)

Please read the following terms and conditions before buying:


So I came to the point in my life where I barely have enough time to take a minute and think about what just happend. College is comming up fast and i simply can no longer put time, money or effort into this hobby. So it all has to go for useable cash. Below is a big majority of all the stuff on my workbench and in the RC cabinets. The prices listed are the prices that I am looking for, but they can be negotiated. Package deals can be done, so please let me know if you are interested. I have the original boxes and instructions for 95% of the items listed

Contact Info:
You can PM me here
Email- [email protected]
Cell Phone- please pm me for this.

CARS

HPI Blitz:

I got this truck about two months ago, it has only had about 15-20 runs on it and it is in excellent shape. Everything is stock, but i did install the included inline steering blocks, dremel a notch into the battery strap for the balance lead of a lipo, and cut out a custom house transponder mount. Included is all of the manuals, extra parts and tools, and a custom painted illuzion body that has little runs on it as well as the stock body that is in pretty good shape. Also installed is a traxxas waterproof slash servo with great torque. i can include a set of tires from the tires list for some extra cash as well.

Price: $120 SOLD

Pics:













Team Associated Factory Team T4:

I got this truck about a year ago and built it myself. Believe it or not, but it has only about 30-40 runs on it. It is in great shape with little wear and. The shocks are in good shape and the diff could probably use a rebuild, but everything is in good working order. included will be a beat up practice body and a freshly painted body with only a few runs. A JR 570M servo will come installed. it has great torque and a good amount of speed. Also included will be the extra parts and tools that came with it plus a few misc spare parts. i can include a set of tires from the tire list if the buyer wishes for a little extra cash.

Price: $120 REDUCED --> $110 SOLD

Pics:







Xray/Bluegroove M18B:

I have had this car for about 3 years now and it has seen a few hundred runs. I put the bluegroove conversion on last year and the conversion itself is great. The diffs were rebuilt not too long ago, but could use another rebuild soon. All the hubs are aluminum as well as the driveshafts. i modded a BRP mini-t bumper to fit and installed mini-t springs on the shocks. Included is a Hitect servo i think 81mg, its got metal gears and great speed/torque. Also included is a set of proline dirthawgs. I made a custom wing mount that has yet to break for the past year. It does need a new spur gear and if the buyer wishes i can stop buy the lhs and pick one up to include for an extra $8. Buyer please recognize that this buggy has been a project of mine for many years and has many custom features. i will include a custom painted body that was painted not too long ago with very few runs. A 1750 lipo can be included for an extra $10. All extra parts will be included as well.

Price $150 REDUCED --> $130 REDUCED --> $115

Pics:

TIRES

1: Traxxas Slash tires+rims- 40% life left- $15 SOLD

2: HPI Maxxis Trepador tires+rims- 85% life left- $25 REDUCED --> $20 REDUCED --> $15

3: HPI ATTK tires+rims- (less than 1 run) 99% life left- $45 REDUCED --> $40 REDUCED --> $30

4: Losi Red Step Pins rear tires+rims- 99% life left- $18 REDUCED --> $12

5: Panther front ribs tires+rims- 20% life left- $5 REDUCED --> $3

6: Ifmar pins (bald now) rear tires+rims- bald- $5 REDUCED --> $3

7: Hpi dirt hawgs (buggy rears)- 80% life left- $8 REDUCED --> $5

8: Proline bowties M2 front tires+rims- 90% life left- $12 REDUCED --> $8

9: Proline front Edge's tires+rims- 60% life left- $8 REDUCED --> $5

10: Proline rear bowties tires+rims- little life left- $5

11:BNIP Proline Bowties M2 tires- brand new- $10 REDUCED --> $7

12: BNIP Proline Front Rims- brand new- $5 REDUCED --> $3

ELECTRONICS

DX3S Transmitter: SOLD

I got this about a year ago when it first came out. Excellent radio. Will include instrctions, extra grip sizes and 4AA's

Price: $100

SR330T Reciever: SOLD

Got this with the transmitter. it has only been installed in two cars so it has very very little wear and is in excellent shape. Will include all the sensors and hardware as well as a bind plug.

Price: $65

SR300 Reciever:

I got this with the transmitter as well. It is in good shape, but the end of the antennae the insulation broke off so i put a peice of heat shrink on it. Other than that it works perfectly. Will include a bind plug.

Price: $40 SOLD

Pics:





Tekin RS + Hotwire: SOLD

I got this around a year and a half ago. It has worked excelltently ever since first installed. No issues at all. Has the latest vegas software installed. Instuctions and boxes will be included.

Price: $140

Pics:







Turnigy Accucell 6 Charger W/ MRC 10Amp Power Supply:

I have had this supply for about two years and its worked like a charm the whole time. I recently got this charger about two months ago and I have been charging all of my batteries with it without any issues since.

Price: $65 SOLD

Pics:







Novak Ballistic 13.5 Motor: SOLD

I've had this for about 3 months and it has kept me competetive for about 30 runs. It has never been ran over 135*F. Will include the sensor wire, instuctions and box.

Price: $45

Pics:



LRP Vector 17.5 Motor:

I have had this motor for about 2 years and it has severed me well for over 80 runs. It was never ran over 135*F Will include the sensor wire and box/instuctions.

Price: $25 SOLD

Pics:



Novak 380 10.5 and 8.5 Motors:

I have had these motors for around 6-8 months and they have worked cog free since. Never ran above 145*F. The 10.5 will need connectors. Sensor wires are in good shape.

Price: $40 for both SOLD

Pics:



TrueRC 5000MAH 2s1p LIPO:

I have had this for around 8 months. It has around 80 runs on it and has been charged at 5.0amps and balanced everytime. Still has good voltage/punch.

Price: $35 REDUCED --> $30 PENDING

Pics:

MISC

Car Stand: SOLD

Got this 2 years ago at the Ihobby expo. It is blue anodized aluminum with a built in magnet for screws and such. It has a bearing installede and can be dissassembled to be more compact in your pit-box.

Price: $10

Pics:



Integy Hex Tool Set:

i have had these since Christmas. They still fit excellently and have little wear. I can include the holder that they are pictured with if the buyer wishes.

Price: $25 SOLD

Pics:



RC Car Bible:

I got this as a gift about a year ago. It is a great book with excellent setup information and more. Cover price is $24.95

Price: $10 PENDING

Pics:





Integy Ride Height and RPM Camber Guage:

Both are in good shape and work great.

Price: $3 each SOLD

Pics:

YOU CAN GET EVERYTHING HERE FOR $1100 plus shipping

Last Update: 4-20-10 10:00PM

Doxiedad

iTrader: (29)

What sizes are the hex tools?

MIcro-T Master

iTrader: (27)

Sorry man, those just sold a little while ago

Updating the list as we speak

iluvmud

iTrader: (89)

how much for the gold blitz wheels and the car stand shipped to 76177?

Thx MUD

bigjayjay1

iTrader: (86)

Great Deals

MIcro-T Master

iTrader: (27)

Pm's replied, thanks guys

xz0so

iTrader: (3)

I'll offer 40 shipped for the 380 motors..paypal...lmk

MIcro-T Master

iTrader: (27)

I have a deal pending for those right now, I will keep you posted

Thanks,
Kyle

MIcro-T Master

iTrader: (27)

BUMP

The Novak 380 motors are sold Thanks

MIcro-T Master

iTrader: (27)

Just updated the list again. The DX3S, 3300T reciever, Tekin RS+Hotwire, and Novak 13.5 Ballistic motor are all pending payment.


Thanks guys

chiro972

iTrader: (10)

PM sent on the car stand.

MIcro-T Master

iTrader: (27)

Replied

Lets get the cars gone guys, it hurts to see everything go except for these

keithncsu

iTrader: (9)

how much would you do on the following items shipped to 29732:

tire numbers: 4,8,11,12
13.5 motor
17.5 motor
car stand

thanks!

MIcro-T Master

iTrader: (27)

The 13.5 motor is pending sale tomorrow as well as the car stand. If they dont sell I will let you know.

For the tire numbers 4, 8, 11, and 12 you are looking at $45 and for the 17.5 motor you are looking at $25 so a total of $70 for the items and shipping looks to be about $10 so for everything shipped $80. If the stand and 13.5 dont sell that will be another $55. I am almost positive they will be gone tomorrow though.

Let me know if you are still interested,
Thanks,
Kyle

jayboy0093

iTrader: (13)

pm sent